Maybe parting 91 4x4 burb. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jkade · 03-14-2007, 08:24 PM

I am begining to wander if I will have time to put the efi on my truck and I am thinking of selling a lot of the parts off the burb. Here's what I will have.

Complete tbi setup, including computer, wiring, fuel lines, tank, intake, throttle body, air cleaner, ( basically everything you need to install on your truck for tbi swap).

I am going to keep the serp setup off the motor but I will sell the 350 motor, trans, and transfer case. Trans wouldn't shift out of first gear but pulled strong. Motor on puffed out a little smoke after sitting for 24hrs (valve seals).

Hood

Doors

Rear doors

Rear gate glass

Rear Gate

2nd row seats

3rd row seat

seat belts

dash pad

overhead console

Interior is brownish tan

I will take $700 for the whole thing minus serp setup, core support, grille, headlight wiring harness, and front seats and console.

Just a what is it worth on the other parts as of now if you don't want the whole burb.

**bigunde** · 03-16-2007, 12:46 PM

pm sent

PickWick · 03-23-2007, 09:40 PM

1/2, 3/4 1 ton? what type of front diff does it have?

jkade · 03-23-2007, 09:48 PM

Quote:

Originally Posted by PickWick

1/2, 3/4 1 ton? what type of front diff does it have?

I am just going to part it. I am keeping the front and rear diffs.

1BadSS · 03-23-2007, 09:50 PM

Parting it due to the trans? Sounds like a bad vacuum modulator.

jkade · 03-23-2007, 10:01 PM

Quote:

Originally Posted by 1BadSS

Parting it due to the trans? Sounds like a bad vacuum modulator.

I just wanted the core support and grille for my 86 K10. Need a 700r4 with a bad vaccum modulator?

03-14-2007, 08:24 PM	#1
jkade Senior Member Join Date: Nov 2005 Location: AL Posts: 2,519	Maybe parting 91 4x4 burb. I am begining to wander if I will have time to put the efi on my truck and I am thinking of selling a lot of the parts off the burb. Here's what I will have. Complete tbi setup, including computer, wiring, fuel lines, tank, intake, throttle body, air cleaner, ( basically everything you need to install on your truck for tbi swap). I am going to keep the serp setup off the motor but I will sell the 350 motor, trans, and transfer case. Trans wouldn't shift out of first gear but pulled strong. Motor on puffed out a little smoke after sitting for 24hrs (valve seals). Hood Doors Rear doors Rear gate glass Rear Gate 2nd row seats 3rd row seat seat belts dash pad overhead console Interior is brownish tan I will take $700 for the whole thing minus serp setup, core support, grille, headlight wiring harness, and front seats and console. Just a what is it worth on the other parts as of now if you don't want the whole burb.

03-16-2007, 12:46 PM	#2
bigunde Rusty Rockerfeller Join Date: May 2003 Location: South Georgia Posts: 1,631	Re: Maybe parting 91 4x4 burb. pm sent

03-23-2007, 09:40 PM	#3
PickWick Registered User Join Date: Jul 2005 Location: Carthage, Texas Posts: 44	Re: Maybe parting 91 4x4 burb. 1/2, 3/4 1 ton? what type of front diff does it have?

03-23-2007, 09:50 PM	#5
1BadSS NOT REALLY BANNED! Join Date: Jul 2004 Location: Shawnee, KS Posts: 1,072	Re: Maybe parting 91 4x4 burb. Parting it due to the trans? Sounds like a bad vacuum modulator. __________________ 1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.