|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-18-2007, 08:25 PM
|
#1 |
|
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,992
|
Ball joints $$$$Control arms
I've been looking at ball joints and control arm kits.Just wondering what prices everyone is paying.For all 4 ball joints and all 4 control arm kits I'm finding about $300.00.Is that in the ballpark for Moog stuff?
Also I found a couple of different #'s for the ball joints(All Moog).Can anyone tell me the difference? K6023-MOK680 Ball joints K6024-MOK6025 The search showed these for the same app.I imagine the MO is the seelers designation but I'm wondering why the difference in #'s? K6098-MOK6135 Control arm repair kit K6147-MOK6256 Same deal. I really want to use Quality parts and have always heard there are none better than Moog. Can anyone enlighten me on what differences there are in these? TIA
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
|
|
|
03-18-2007, 10:12 PM
|
#2 |
|
Registered User
Join Date: May 2006
Location: Colorado
Posts: 412
|
Re: Ball joints $$$$Control arms
I just bought mine from http://www.rockauto.com/catalog/raframecatalog.php the K6024 was an upper BJ for 23.79. The K6023 was a lower BJ for 25.79. BTW, I got these for a 68 C10. The part numbers are different(and more expensive)for the 71-72 C10. The price of the ball joints helped me decide which spindles to by from ECE. If you have drums and are looking to get spindles and discs, the 67-70 spindle saves you money on ball joints, about $50. I didn't check pricing on control arm parts.
|
|
|
|
|
03-18-2007, 11:35 PM
|
#3 |
|
Senior Member
Join Date: Jan 2005
Location: Loveland Co.
Posts: 3,098
|
Re: Ball joints $$$$Control arms
 And as his ball joint installer flunky I was happy to see they were the Moog problem solvers.
__________________
Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html |
|
|
|
|
03-19-2007, 05:03 PM
|
#4 |
|
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,992
|
Re: Ball joints $$$$Control arms
That's one of the spots i was looking.They seem to have the best pricing so far.I just wasn't sure why there would be two different #'s for one application.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
