16.5 inch trim rings? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chevy Punk · 09-03-2002, 07:42 PM

Does anyone have any 16.5 inch wheel trim rings or know where i could get some?

DennyB · 09-03-2002, 08:31 PM

CP, The 16.5" wheel was a size used on the 3/4 ton and up HD work trucks. Trim rings were not an option.
I know of no aftermarket supplier either. Sorry.
Maybe you would like to switch to a 16" wheel??

Longhorn Man · 09-03-2002, 09:02 PM

While I have yet to try this, I hav been told that rings from a 16 inch will fit.

Chevy Punk · 09-03-2002, 10:51 PM

Thanks for the info. I don't think illbe switching to 16s because i got the 16.5s off my engine donor truck to replace my 16" split rims.

OhioDan · 09-04-2002, 06:16 AM

If I'm not mistaken, I saw the trim rings you want in a J.C. Whitney catalog?

*Fast68Chevy* · 09-08-2002, 06:08 AM

also good luck fidding any replacement 16.5" tires without spending $$$$$$

i assume this is on a 3/4 or 1 ton, if you were closer id give you set of five std one piece 16" wheels for cheap that i dont need, and the tires on them are all nice and awesome tread. i think 265/85/16 size

good luck.

Longhorn Man · 09-08-2002, 01:08 PM

damn...if I was closer I'd be interested in those...

09-03-2002, 07:42 PM	#1
Chevy Punk Registered User Join Date: Apr 2002 Location: Blaine WA Posts: 455	16.5 inch trim rings? Does anyone have any 16.5 inch wheel trim rings or know where i could get some?

09-03-2002, 08:31 PM	#2
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	CP, The 16.5" wheel was a size used on the 3/4 ton and up HD work trucks. Trim rings were not an option. I know of no aftermarket supplier either. Sorry. Maybe you would like to switch to a 16" wheel?? __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

09-04-2002, 06:16 AM	#5
OhioDan Registered User Join Date: Apr 2002 Location: New Carlisle, Ohio,USA Posts: 1,404	If I'm not mistaken, I saw the trim rings you want in a J.C. Whitney catalog? __________________ LIFE AIN'T EASY WHEN YER FAT AND GREASY! GMC= Got More Class! 1970 GMC LWB, Fleetside, 350/4spd, Flowmaster "40's", 2002 GMC 16" Rallies, cowl hood,and added a bunch of options that weren't there when I started.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-03-2002, 09:02 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	While I have yet to try this, I hav been told that rings from a 16 inch will fit.

09-03-2002, 10:51 PM	#4
Chevy Punk Registered User Join Date: Apr 2002 Location: Blaine WA Posts: 455	Thanks for the info. I don't think illbe switching to 16s because i got the 16.5s off my engine donor truck to replace my 16" split rims.

09-08-2002, 06:08 AM	#6
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	also good luck fidding any replacement 16.5" tires without spending $$$$$$ i assume this is on a 3/4 or 1 ton, if you were closer id give you set of five std one piece 16" wheels for cheap that i dont need, and the tires on them are all nice and awesome tread. i think 265/85/16 size good luck.

09-08-2002, 01:08 PM	#7
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	damn...if I was closer I'd be interested in those...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.