67 chevy k20 spindles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

steveon3 · 03-30-2007, 06:23 AM

i am looking for a set of spindles for a dana 44 closed knuckle front end. If i cant find then will other spindles work?

steveon3 · 03-30-2007, 06:29 AM

oh yea the hubs are external with the knob made out of metal with the cover held on by 6 3/8 bolts 4 inches long

**special-K** · 03-30-2007, 06:46 PM

I believe you can use up to`69,the last year for closed knuckles.

pickupman · 03-30-2007, 07:24 PM

I may have some used ones, I can check and see

john@thepier · 03-30-2007, 08:26 PM

I have some for sure, is it just the spindles that you need or more? I have the drums and more here, and can let the stuff go reasonably. Let me know if you need pictures.

steveon3 · 03-31-2007, 06:33 AM

the front spindles is all i need right now but you know how that goes. Im fixing up truck that has been setting for 8 years in a field

steveon3 · 03-31-2007, 03:27 PM

after futher checking it out, i need the small springs that go behind the lockout assembly. some pics would be nice. thanks

john@thepier · 04-08-2007, 12:59 PM

Pictures as requested. These are off of a 67 k20 and are in very good condition. Leyt me know if I can be of anymore help. JOHN

steveon3 · 04-10-2007, 06:22 AM

john pm me .I am interested in the spindles. Thanks

**special-K** · 04-10-2007, 10:05 AM

You`d do good to buy up these parts.They`re all obsolete,might not be around next time.Just an observation from a fellow vintage 4wd nut.

steveon3 · 04-10-2007, 09:44 PM

john i'll take all of it if that is what you want to do. also im looking for a rear brake drum that is off a eaton that has 12" brakes 2 inches wide

steveon3 · 04-10-2007, 09:45 PM

hey special K, thanks for getting that through my thick pumkin

msgross · 04-10-2007, 10:04 PM

are 1/2 ton spindles the same?

03-30-2007, 06:23 AM	#1
steveon3 Junior Member Join Date: Mar 2007 Location: eminence, ky Posts: 25	67 chevy k20 spindles i am looking for a set of spindles for a dana 44 closed knuckle front end. If i cant find then will other spindles work?

03-30-2007, 06:29 AM	#2
steveon3 Junior Member Join Date: Mar 2007 Location: eminence, ky Posts: 25	Re: 67 chevy k20 spindles oh yea the hubs are external with the knob made out of metal with the cover held on by 6 3/8 bolts 4 inches long

03-30-2007, 06:46 PM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 67 chevy k20 spindles I believe you can use up to`69,the last year for closed knuckles. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-30-2007, 07:24 PM	#4
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Re: 67 chevy k20 spindles I may have some used ones, I can check and see __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

03-30-2007, 08:26 PM	#5
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: 67 chevy k20 spindles I have some for sure, is it just the spindles that you need or more? I have the drums and more here, and can let the stuff go reasonably. Let me know if you need pictures.

03-31-2007, 06:33 AM	#6
steveon3 Junior Member Join Date: Mar 2007 Location: eminence, ky Posts: 25	Re: 67 chevy k20 spindles the front spindles is all i need right now but you know how that goes. Im fixing up truck that has been setting for 8 years in a field

03-31-2007, 03:27 PM	#7
steveon3 Junior Member Join Date: Mar 2007 Location: eminence, ky Posts: 25	Re: 67 chevy k20 spindles after futher checking it out, i need the small springs that go behind the lockout assembly. some pics would be nice. thanks

04-08-2007, 12:59 PM	#8
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: 67 chevy k20 spindles Pictures as requested. These are off of a 67 k20 and are in very good condition. Leyt me know if I can be of anymore help. JOHN Attached Images

04-10-2007, 06:22 AM	#9
steveon3 Junior Member Join Date: Mar 2007 Location: eminence, ky Posts: 25	Re: 67 chevy k20 spindles john pm me .I am interested in the spindles. Thanks

04-10-2007, 10:05 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 67 chevy k20 spindles You`d do good to buy up these parts.They`re all obsolete,might not be around next time.Just an observation from a fellow vintage 4wd nut. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-10-2007, 09:44 PM	#11
steveon3 Junior Member Join Date: Mar 2007 Location: eminence, ky Posts: 25	Re: 67 chevy k20 spindles john i'll take all of it if that is what you want to do. also im looking for a rear brake drum that is off a eaton that has 12" brakes 2 inches wide

04-10-2007, 09:45 PM	#12
steveon3 Junior Member Join Date: Mar 2007 Location: eminence, ky Posts: 25	Re: 67 chevy k20 spindles hey special K, thanks for getting that through my thick pumkin

04-10-2007, 10:04 PM	#13
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 67 chevy k20 spindles are 1/2 ton spindles the same? __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.