Fuel Filler neck and vent hose for dual tanks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

datmony · 03-31-2007, 04:20 PM

Does anyone know where to get these at? This is the hose that runs from the into the tank from where you would fill the tank at the gas pump. I thought Napa or someone would at least have some straight hose that I would be able to use but the smallest size they have is 1-1/2" ID where as the hose that came off has an ID of only 1-3/8". I have been looking all over the web as well and I have not been able to find anything that small. I would prefer one with a bend but could likely live with a straight one if that is all there is. Thanks in advance.

Restrorob · 03-31-2007, 04:40 PM

You can find the proper hoses here;

http://www.lmctruck.com/icatalog/cc/0122.asp

See Ya

datmony · 03-31-2007, 11:42 PM

Restrorob,

Thanks man!! This place looks to be an excellent resource for tons of products for these trucks. If you have a list of other good resources I should know about I would love to see them. Thanks again!!

K Dubb · 03-31-2007, 11:56 PM

I got an extra pair off my 77 lwb

03-31-2007, 04:20 PM	#1
datmony Registered User Join Date: Mar 2007 Location: Reno, NV Posts: 4	Fuel Filler neck and vent hose for dual tanks Does anyone know where to get these at? This is the hose that runs from the into the tank from where you would fill the tank at the gas pump. I thought Napa or someone would at least have some straight hose that I would be able to use but the smallest size they have is 1-1/2" ID where as the hose that came off has an ID of only 1-3/8". I have been looking all over the web as well and I have not been able to find anything that small. I would prefer one with a bend but could likely live with a straight one if that is all there is. Thanks in advance.

03-31-2007, 04:40 PM	#2
Restrorob The One And Only !!! Join Date: Jan 2007 Location: Hole in the woods Florida Posts: 4,567	Re: Fuel Filler neck and vent hose for dual tanks You can find the proper hoses here; http://www.lmctruck.com/icatalog/cc/0122.asp See Ya __________________ 93 Jeep XJ 88 Buick La Sabra Toys; 88 TA-GTA in the works.... 97 GMC Ext. Cab 502 Crate 5 Spd......Sucks Gas But Haulz Azz ! The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic. *"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!*

03-31-2007, 11:42 PM	#3
datmony Registered User Join Date: Mar 2007 Location: Reno, NV Posts: 4	Re: Fuel Filler neck and vent hose for dual tanks Restrorob, Thanks man!! This place looks to be an excellent resource for tons of products for these trucks. If you have a list of other good resources I should know about I would love to see them. Thanks again!!

03-31-2007, 11:56 PM	#4
K Dubb www.Dubbmotorsports.com Join Date: Jul 2004 Location: Michigan Posts: 110	Re: Fuel Filler neck and vent hose for dual tanks I got an extra pair off my 77 lwb __________________ DubbMotorSports Edition

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.