87 Chevy Project Truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DROPPED15 · 04-19-2007, 08:33 PM

I DROOPED THE TRUCK 4 INCHES WITH A SHACKLE KIT IN THE REAR AND CUT 1 1/2 COILS UP FRONT.INSTALLED A PHANTOM GRILL AND NEW EXHAUST.FURTURE PLANS ARE TO DROP A COUPLE MORE INCHES AN SMALLER TIRES.ROLL-PAN IN REAR WITH A HIDDEN HITCH.BILLET MIRRORS AND NEW PAINT.

BIGCHEVYMAN · 04-19-2007, 08:37 PM

I like the wheels and tire combo you have on your truck.
I have got to have one of those grilles.

DROPPED15 · 04-19-2007, 08:52 PM

They Are 15x10 With A 275/60/15 And Got That Gill At Cost $230.00

knightlife · 04-19-2007, 09:56 PM

that has such an awesomely aggressive stance to it...looks damn good bro

87 STEPPER · 04-20-2007, 10:49 AM

Good start it look's good

I don't think those are the stock mirrors they look like ones from a Van.

I know you said you plan to change them but i thought id'e point it out.

Nick Truck

boatpuller · 04-20-2007, 11:06 AM

nice stance.....jmo. body work next. even in primer it will look cooler than those dents do with paint.

looks like a good start on a big hole to throw money into.called "project".just like me and everybody else on here.but hey,there's worse stuff to spend money on. (p.s love the deep dish rally.)

DROPPED15 · 04-22-2007, 09:32 PM

Yes They Are Van Mirrors.when I Bought The Truck It Had Some Scholl Bus Mirrors On It So I Went To Lambert's Auto Parts And Look For A Couple Of Hours For A Truck With Mirrors.every Truck There Had A Door Gone So The Van Was The One.sorry For The Slow Reponse.me And The Family Took A Mini Vacation To Piegon Forge This Weekend For The Grand Run.

BIGCHEVYMAN · 04-22-2007, 10:12 PM

I am taking my boys this fall to the rod run and we are going to drive my 81.

DROPPED15 · 04-23-2007, 10:21 PM

GIVE ME A SHOUT!WECOULD HOOK-UP AND SHOOT THE BULL.

jchav62 · 04-24-2007, 01:50 PM

Looks great! Nice wheels and stance. I wish my 83 looked that nice already...How much is the drop? 2"-4"??

BIGCHEVYMAN · 04-24-2007, 06:14 PM

we can do that, whick direction are you coming from? i will be coming from nashville.

Donnylee · 04-24-2007, 07:06 PM

How does this thing ride with the change? Question. Do you have to cut up the original grill to use the Phantom?

DROPPED15 · 04-25-2007, 07:15 PM

Quote:

Originally Posted by jchav62

Looks great! Nice wheels and stance. I wish my 83 looked that nice already...How much is the drop? 2"-4"??

I CUT A 1 1/2 COIL OFF THE FRONT AND 4 INCH SHACKLE KIT IN THE REAR.

DROPPED15 · 04-25-2007, 07:16 PM

Quote:

Originally Posted by BIGCHEVYMAN

we can do that, whick direction are you coming from? i will be coming from nashville.

I LIVE IN POWELL WHICH IS ON THE OUT SKIRTS OF KNOXVILLE.

DROPPED15 · 04-25-2007, 07:19 PM

Quote:

Originally Posted by Donnylee

How does this thing ride with the change? Question. Do you have to cut up the original grill to use the Phantom?

IT STILL RIDES THE SAME.THE GRILL IS A REPLACEMENT GRILL(IT BOLTS BACK IN THE THE FACTORY GRILL'S PLACE NO CUTTING REQUIRED)

04-19-2007, 08:33 PM	#1
DROPPED15 HALF ASSER Join Date: Feb 2007 Location: IN THE GHETTO Posts: 204	87 Chevy Project Truck I DROOPED THE TRUCK 4 INCHES WITH A SHACKLE KIT IN THE REAR AND CUT 1 1/2 COILS UP FRONT.INSTALLED A PHANTOM GRILL AND NEW EXHAUST.FURTURE PLANS ARE TO DROP A COUPLE MORE INCHES AN SMALLER TIRES.ROLL-PAN IN REAR WITH A HIDDEN HITCH.BILLET MIRRORS AND NEW PAINT. Attached Images __________________

04-19-2007, 08:37 PM	#2
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	Re: 87 Chevy Project Truck I like the wheels and tire combo you have on your truck. I have got to have one of those grilles.

04-19-2007, 08:52 PM	#3
DROPPED15 HALF ASSER Join Date: Feb 2007 Location: IN THE GHETTO Posts: 204	Re: 87 Chevy Project Truck They Are 15x10 With A 275/60/15 And Got That Gill At Cost $230.00 __________________

04-19-2007, 09:56 PM	#4
knightlife Dark Heart Motorsports Join Date: Apr 2007 Location: 29404 DKFX Posts: 683	Re: 87 Chevy Project Truck that has such an awesomely aggressive stance to it...looks damn good bro __________________ How Deep Can YOU Bleed..? 1985 Chevy Blazer K5- 6.2 N/A, 400 turbo trans CUCV, 12v converted... a new chapter 2005 GMC Sierra Crew Cab 6.0 powwwaa!!! custom jumpseat install w/ captain seats, Hypertech tuner, MSD Blaster Coils, CB and twin antenna's, all electric interior, touch screen in dash. custom center console, with jump seat replacing original console. 1500 HD!

04-20-2007, 10:49 AM	#5
87 STEPPER STILL PLAYS WITH TRUX Join Date: Nov 2002 Location: Melbourne, Fla. Posts: 2,764	Re: 87 Chevy Project Truck Good start it look's good I don't think those are the stock mirrors they look like ones from a Van. I know you said you plan to change them but i thought id'e point it out. Nick Truck __________________ ~~Bruce~~ MY 87 STEPPER MY 99 2D/WD TAHOE Last edited by 87 STEPPER; 04-20-2007 at 10:49 AM.

04-20-2007, 11:06 AM	#6
boatpuller Registered User Join Date: Sep 2005 Location: Sun City West, Az Posts: 3,822	Re: 87 Chevy Project Truck nice stance.....jmo. body work next. even in primer it will look cooler than those dents do with paint. looks like a good start on a big hole to throw money into.called "project".just like me and everybody else on here.but hey,there's worse stuff to spend money on. (p.s love the deep dish rally.) __________________ " Never look up a dead dogs butt." Last edited by boatpuller; 04-20-2007 at 11:07 AM.

04-22-2007, 09:32 PM	#7
DROPPED15 HALF ASSER Join Date: Feb 2007 Location: IN THE GHETTO Posts: 204	Re: 87 Chevy Project Truck Yes They Are Van Mirrors.when I Bought The Truck It Had Some Scholl Bus Mirrors On It So I Went To Lambert's Auto Parts And Look For A Couple Of Hours For A Truck With Mirrors.every Truck There Had A Door Gone So The Van Was The One.sorry For The Slow Reponse.me And The Family Took A Mini Vacation To Piegon Forge This Weekend For The Grand Run. __________________

04-22-2007, 10:12 PM	#8
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	Re: 87 Chevy Project Truck I am taking my boys this fall to the rod run and we are going to drive my 81. Last edited by BIGCHEVYMAN; 04-22-2007 at 10:42 PM.

04-23-2007, 10:21 PM	#9
DROPPED15 HALF ASSER Join Date: Feb 2007 Location: IN THE GHETTO Posts: 204	Re: 87 Chevy Project Truck GIVE ME A SHOUT!WECOULD HOOK-UP AND SHOOT THE BULL. __________________

04-24-2007, 01:50 PM	#10
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 87 Chevy Project Truck Looks great! Nice wheels and stance. I wish my 83 looked that nice already...How much is the drop? 2"-4"?? __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4 Last edited by jchav62; 04-24-2007 at 01:51 PM.

04-24-2007, 06:14 PM	#11
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	Re: 87 Chevy Project Truck we can do that, whick direction are you coming from? i will be coming from nashville.

04-24-2007, 07:06 PM	#12
Donnylee Registered User Join Date: Feb 2007 Location: Oregon Posts: 44	Re: 87 Chevy Project Truck How does this thing ride with the change? Question. Do you have to cut up the original grill to use the Phantom? __________________ Would you rather be eating Government Cheese down by the river, and living in a C-10~!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.