Bench Seat - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rust Buster · 04-30-2007, 09:22 PM

Is there a sure fire way to tell if the bench seat in my 72 K20 is original?

knsmodels · 05-01-2007, 01:46 PM

Many on here could tell ya but a picture would be necessary......

EAST SIDE LOW LIFE · 05-01-2007, 07:56 PM

When I took my bench out to have it upholsterd in about the centre of the back tied to a spring was a card board tag tied to a spring with what appeared to be a part #.

A photo would be nice to see of your bench as this would be helpful.

esll.

Rust Buster · 05-01-2007, 08:32 PM

This is the only one I have at the moment, and I know that if it is the original, that it has been re-covered. Not sure how much you can tell from it. Is there a certain shot that will tell one way or the other?

redhead69 · 05-01-2007, 08:33 PM

Mine had a build sheet underneath between the foam supports, had all sorts of info about the truck on it. If you havent already, take a look under your seat.

heavy71chevy · 05-01-2007, 08:38 PM

im pretty sure that prolly came from the truck the steering whell did...they match in color at least in the pics and that looks lot like my seat out of my 88 2500 chevy

04-30-2007, 09:22 PM	#1
Rust Buster Registered User Join Date: Apr 2007 Location: Virginia Posts: 547	Bench Seat Is there a sure fire way to tell if the bench seat in my 72 K20 is original? __________________ Maj USAF 71 K5 Blazer CST 72 K20 HT383 NV4500 Mass-Flo EFI 71 K10 LWB 52 Dodge Power Wagon 67 Dodge WM300 Power Wagon 48 Dodge WDX Power Wagon My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=239487

05-01-2007, 01:46 PM	#2
knsmodels I make Models Join Date: May 2005 Location: Bucks, PA Posts: 626	Re: Bench Seat Many on here could tell ya but a picture would be necessary...... __________________ Click to see what I do 1972 LWB K10 350/4 sp 1968 SS Chevelle 396/tremac5spd

05-01-2007, 07:56 PM	#3
EAST SIDE LOW LIFE Senior Member Join Date: Mar 2007 Location: VANCOUVER ISLAND, B.C., Canada Posts: 1,602	Re: Bench Seat When I took my bench out to have it upholsterd in about the centre of the back tied to a spring was a card board tag tied to a spring with what appeared to be a part #. A photo would be nice to see of your bench as this would be helpful. esll. __________________ Tomorrow is for doing today's stuff. ************************************* This truck has just the right amount of energy for me! Author: Warren Lake .... (member)

05-01-2007, 08:32 PM	#4
Rust Buster Registered User Join Date: Apr 2007 Location: Virginia Posts: 547	Re: Bench Seat This is the only one I have at the moment, and I know that if it is the original, that it has been re-covered. Not sure how much you can tell from it. Is there a certain shot that will tell one way or the other? Attached Images __________________ Maj USAF 71 K5 Blazer CST 72 K20 HT383 NV4500 Mass-Flo EFI 71 K10 LWB 52 Dodge Power Wagon 67 Dodge WM300 Power Wagon 48 Dodge WDX Power Wagon My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=239487

05-01-2007, 08:33 PM	#5
redhead69 fugedaboutit Join Date: Mar 2005 Location: Gresham, OR Posts: 832	Re: Bench Seat Mine had a build sheet underneath between the foam supports, had all sorts of info about the truck on it. If you havent already, take a look under your seat. __________________ Currently truckless

05-01-2007, 08:38 PM	#6
heavy71chevy Registered User Join Date: Apr 2007 Location: antreville, south carolina Posts: 873	Re: Bench Seat im pretty sure that prolly came from the truck the steering whell did...they match in color at least in the pics and that looks lot like my seat out of my 88 2500 chevy

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.