HELP! factory locker ??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SS79chevy · 05-15-2007, 01:17 AM

ok got really lucky the other day and found a mid 70s 4x4 truck in the junk yard witch happened to have a factory 3:73 geard 12bolt in it with the factory locker not the limited slip a locker but some one had took one axle and the pinion shaft was gone i picked up the rest of the rear for 35bucks

got it home and found that some how the C-clip got wedged on the axle and i had to take a ****y torch and an air hammer to it to get it free but in the process i broke off one end of the Thrust block

so now idk if it will still work or not but my ??? is to eny that has had one of these do they make a rebuild kit for one or do they sale parts for them like a new thrust block or a pinion shaft??? or can these things even be rebuilt? eny one know of a place that could go throught it for me around the dallas/ft. worth area??

eny info on this would be great

Thanx

**Captkaos** · 05-16-2007, 12:20 AM

Post a pic of what it looks like...

SS79chevy · 05-16-2007, 01:10 AM

Quote:

Originally Posted by Captkaos

Post a pic of what it looks like...

not the one i got but what it looks like

SS79chevy · 05-16-2007, 01:13 AM

the thrust block is in the center the pinion shaft slides through the spiders gears then through it i broke one end of the thrust block off

05-15-2007, 01:17 AM	#1
SS79chevy Registered User Join Date: May 2003 Location: hurst,TX Posts: 73	HELP! factory locker ??? ok got really lucky the other day and found a mid 70s 4x4 truck in the junk yard witch happened to have a factory 3:73 geard 12bolt in it with the factory locker not the limited slip a locker but some one had took one axle and the pinion shaft was gone i picked up the rest of the rear for 35bucks got it home and found that some how the C-clip got wedged on the axle and i had to take a ****y torch and an air hammer to it to get it free but in the process i broke off one end of the Thrust block so now idk if it will still work or not but my ??? is to eny that has had one of these do they make a rebuild kit for one or do they sale parts for them like a new thrust block or a pinion shaft??? or can these things even be rebuilt? eny one know of a place that could go throught it for me around the dallas/ft. worth area?? eny info on this would be great Thanx __________________ 1979 chevy c10 short bed step side BBC in the works

05-16-2007, 12:20 AM	#2
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: HELP! factory locker ??? Post a pic of what it looks like... __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

05-16-2007, 01:13 AM	#4
SS79chevy Registered User Join Date: May 2003 Location: hurst,TX Posts: 73	Re: HELP! factory locker ??? the thrust block is in the center the pinion shaft slides through the spiders gears then through it i broke one end of the thrust block off __________________ 1979 chevy c10 short bed step side BBC in the works

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.