|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
06-01-2007, 10:49 PM
|
#1 |
|
senior member
Join Date: Feb 2003
Location: fort macleod alberta
Posts: 2,770
|
question about my tank
I was just noticing on my tank that I only have 4 holes (maybe this is common I dont know) and I know one is going to be the feed from the comp but then should I put a "T" in one of them for say both back bags then use a seperate port for each front? would that make sense or what would you guys put in the holes
EDIT: I just realised i will be using one hole for a pressure switch so i guess 2 T's? I need now?
__________________
69 GMC bagged Last edited by pissonNOS; 06-01-2007 at 11:01 PM. |
|
|
|
06-01-2007, 11:38 PM
|
#2 |
|
Account Suspended
Join Date: Jun 2000
Location: over yonder
Posts: 14,270
|
Re: question about my tank
1 for fill
1 for pressure switch 1 for gage (optional) 1 or 2 for valves - depending on if you run a gage |
|
|
|
|
06-01-2007, 11:40 PM
|
#3 |
|
senior member
Join Date: Feb 2003
Location: fort macleod alberta
Posts: 2,770
|
Re: question about my tank
ya im not running a guage so i guess ill use the other 2 for fill and get some Ts
__________________
69 GMC bagged |
|
|
|
|
06-02-2007, 11:22 PM
|
#4 |
|
Too many projects
Join Date: Mar 2004
Location: Fargo, ND land of the flat hills
Posts: 1,147
|
Re: question about my tank
You're right, just run T's off of two ports, that's how mine is and I am fine with the lift speed.
__________________
Andrew 84 GMC C1500 SWB 6.2 Diesel/700R4/3.42 "Grandpa's odd duck" |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
