|
09-14-2002, 09:07 PM
|
#1 |
|
Just here to help
 
Join Date: Jan 2002
Location: Norwood,Mo
Posts: 3,890
|
Dumb ???????
Ok here it is.where does my temp guage go?I have the double hump heads off of a 327 and have nothing in the heads to put a guage in.So is there any other choices?Thanx in advance.................James
|
|
|
|
09-14-2002, 09:22 PM
|
#2 |
|
Registered User
Join Date: May 2002
Location: Southern California
Posts: 66
|
Might want to look on the intake manifold by the thermostat.
__________________
No, Its not a 454 |
|
|
|
|
09-14-2002, 09:41 PM
|
#3 |
|
Just here to help
Join Date: Jan 2002
Location: Norwood,Mo
Posts: 3,890
|
I have a edlebrock RMP intake and nothing in or around the thermastat.Any other places to look?
|
|
|
|
|
09-14-2002, 10:25 PM
|
#4 |
|
Just here to help
Join Date: Jan 2002
Location: Norwood,Mo
Posts: 3,890
|
ttt
can someone help me before i blow this thing........lol?
|
|
|
|
|
09-14-2002, 10:28 PM
|
#5 |
|
Registered User
Join Date: Mar 2002
Location: Floodwood Minnesota
Posts: 1,057
|
your answer
Get a OEM style thermostat housing from a late 70's 350 that had the vacuum sending unit access in the top. Or find someone who has a tig welder and install a bung for your sending unit.
__________________
1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison. |
|
|
|
|
09-15-2002, 01:16 AM
|
#6 | |
|
Green club
Join Date: May 2002
Location: Central CA
Posts: 1,059
|
Quote:
 Unless somone has plugged it there should be one there on the right, beside the water neck and thermostat casting about 3/4" hole.
__________________
71 short/fleet ECE 4/6 drop, LQ4/700r4/3.42 gears 70 SS396 Chevelle 427/200-4R/3.73posi 61 Lincoln Continental, black on black Son you are going to drive me to drinkin if you don't stop drivin that hot rod lincoln |
|
|
|
|
|
09-15-2002, 01:18 AM
|
#7 |
|
Recovering Truck Driver
Join Date: Mar 2002
Location: Orleans, NE USA
Posts: 1,883
|
Unless I'm thinking too much Oldsmobile, there is a plug in the side of the block, will either be a hex (allen) or square. should be either in front of the front soft plug or between the 1st and 2nd soft plug on the left side of the block.
__________________
67 K-20 350, SM465, Eaton rear, 4.56 no spin option 00 Dodge 2500 4x4, 24V cummins, 5 speed Chad South Central Nebraska |
|
|
|
|
09-15-2002, 01:23 AM
|
#8 |
|
Just here to help
Join Date: Jan 2002
Location: Norwood,Mo
Posts: 3,890
|
thanx guys
Just wanted to say thanx and i will look again in the morning.......James
|
|
|
|
|
09-15-2002, 01:24 AM
|
#9 |
|
"See the U.S.A....."
Join Date: Apr 2002
Location: Richmond TX.
Posts: 269
|
The performer RPM has a hole on each side of the T-stat housing.
__________________
1970 short bed fleetside 1949 all origional chevy 3600 1974 camaro Richmond , Texas(just S.W.of Houston) |
|
|
|
|
09-15-2002, 01:43 AM
|
#10 | |
|
Green club
Join Date: May 2002
Location: Central CA
Posts: 1,059
|
Quote:
__________________
71 short/fleet ECE 4/6 drop, LQ4/700r4/3.42 gears 70 SS396 Chevelle 427/200-4R/3.73posi 61 Lincoln Continental, black on black Son you are going to drive me to drinkin if you don't stop drivin that hot rod lincoln |
|
|
|
|
|
09-15-2002, 02:18 AM
|
#11 |
|
Registered User
Join Date: Sep 2002
Location: fort collins
Posts: 27
|
on my 69 350, there is a empty slot on the drivers side that i plugged on my performer intake that could be used for a coolant temp sensonr, also, i have the double hump heads, and my temp sensor is between cylinders 1 and 3 on the block..
__________________
69 gmc 350/350 in colorful colorado Last edited by caa332; 09-15-2002 at 03:24 AM. |
|
|
|
|
09-15-2002, 04:35 AM
|
#12 | ||
|
Registered User
Join Date: Jan 2002
Location: Renton, WA
Posts: 171
|
Quote:
made me laugh....
__________________
FOUNDING MEMBER OF THE DRUM BRAKE CLUB 69 c-10. turquoise. 350 motor with 400 trans. long fleet. headers and dual flowmaster exhaust. K & N air cleaner, aluminum wheels and radials, stereo system and a bed liner. Manual drums and manual steering. Kickin it in Seattle, WA p.s. i love my longbed. must be a phallic thing. |
||
|
|
|
|
09-15-2002, 09:26 AM
|
#13 |
|
Account Suspended
Join Date: Jan 2000
Location: Woodstock, IL
Posts: 7,020
|
This engine is out in my garage, and no it's not mine.
 And BTW, I don't have the housing we spoke of last night. But this engine has one, and that's what I'm speaking of.  
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
