wiper help please - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wibilly · 06-24-2007, 09:37 PM

i'm putting my truck back togather. my washer pump does not pump water. are there rebuild kits avalible ? do you get a new pump with a new wiper moter? and if i go with an aftermarket pump which wire powers the pump? is it the dark blue one? thanks a bunch

**oldiron** · 06-25-2007, 12:36 AM

I think you missed the correct forum. I will move this over to the pickup forum for you.
As far as your pump is concerned I think you still can get a complete pump or a rebuild kit thru NAPA or Carquest.
Good luck
oldiron forum staff

**SactoJim** · 06-25-2007, 12:51 AM

http://www.truckandcarshop.com/trucks60_72/t60_046.html

GREASEMONKEY72 · 06-25-2007, 01:20 AM

ill have to keep that in mind, mine hasnt worked since i got it

wibilly · 06-25-2007, 01:37 AM

thanks for moving this old iron this is where i ment for it to be.i had no idea these were availible. i guess because iv'e seel so many inline in these trucks. probably because it's easier than tearing the dash apart,but mine is already apart so now is the time

HomerJ · 06-26-2007, 06:28 AM

I have the same problem, but with a twist:

I bought the rebuild kit, only to find that the pump diaphragm was dry-rotted to death. The next logical step was to replace the entire pump assembly, which presented its on set of problems. First, I have a 67, which apparently has a "slightly" different design from 68-72. The pump assembly was about 1/4" longer than the original one (screw holes don't line up). Also, the original "cam" was metal, with the pump rod being nylon. The repro has nylon cam, and a metal pump rod. I can't get the metal cam to come off the wiper motor assembly, which would leave a metal-to-metal contact if I were to find a way to get the new pump to mount.

The only good thing is that I'm tearing the truck down for a resto-mod. I'll probably replace the whole wiper motor assembly in the process.

HomerJ

06-24-2007, 09:37 PM	#1
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	wiper help please i'm putting my truck back togather. my washer pump does not pump water. are there rebuild kits avalible ? do you get a new pump with a new wiper moter? and if i go with an aftermarket pump which wire powers the pump? is it the dark blue one? thanks a bunch __________________ common sense isn't so common anymore

06-25-2007, 12:36 AM	#2
oldiron Designated Grumpy Old Man Join Date: Oct 2001 Location: arlington, washington usa Posts: 3,094	Re: wipper help please I think you missed the correct forum. I will move this over to the pickup forum for you. As far as your pump is concerned I think you still can get a complete pump or a rebuild kit thru NAPA or Carquest. Good luck oldiron forum staff __________________ Never let the truth get in the way of a good story 71 Chev 1/2 ton 4X4 LWB Fleetside SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=361222 http://www.youtube.com/watch?v=1LgREwtDfaA 68 Chev 1 ton flat bed http://www.youtube.com/watch?v=0bO8szzlD4A 56 Chev Handyman Wagon http://www.youtube.com/watch?v=9y-6ddpBTkM http://www.youtube.com/watch?v=lbLzZ7zY8wA 56 Chev Belair http://67-72chevytrucks.com/vboard/s...d.php?t=410667 http://www.youtube.com/watch?v=xoW0Ei7ZNIg

06-25-2007, 12:51 AM	#3
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: wipper help please http://www.truckandcarshop.com/trucks60_72/t60_046.html __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread

06-25-2007, 01:20 AM	#4
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: wipper help please ill have to keep that in mind, mine hasnt worked since i got it __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

06-25-2007, 01:37 AM	#5
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	Re: wipper help please thanks for moving this old iron this is where i ment for it to be.i had no idea these were availible. i guess because iv'e seel so many inline in these trucks. probably because it's easier than tearing the dash apart,but mine is already apart so now is the time __________________ common sense isn't so common anymore

06-26-2007, 06:28 AM	#6
HomerJ Registered User Join Date: Apr 2007 Location: Norman, OK Posts: 222	Re: wiper help please I have the same problem, but with a twist: I bought the rebuild kit, only to find that the pump diaphragm was dry-rotted to death. The next logical step was to replace the entire pump assembly, which presented its on set of problems. First, I have a 67, which apparently has a "slightly" different design from 68-72. The pump assembly was about 1/4" longer than the original one (screw holes don't line up). Also, the original "cam" was metal, with the pump rod being nylon. The repro has nylon cam, and a metal pump rod. I can't get the metal cam to come off the wiper motor assembly, which would leave a metal-to-metal contact if I were to find a way to get the new pump to mount. The only good thing is that I'm tearing the truck down for a resto-mod. I'll probably replace the whole wiper motor assembly in the process. HomerJ __________________ 67 C-10 LWB "Cow-butt-spotted" (neighbor's term) - work in progress. 350/TH400/3.73 67 Chevelle SS Clone 454/TH400/3.73 Last edited by HomerJ; 06-26-2007 at 06:29 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.