![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Apr 2006
Location: va
Posts: 553
|
Look at the deal I got! did i over pay?
I know i need pictures...maybe tomorrow
what do you think. did I pay too much I just picked up a 1970 3/4 ton 2wd the bed has a dent in the drivers side but no rust and repairable. the passenger side looks good no rust in or out. inside bed wheel wells are dent/rust free. It has a wood floor or what is left of the wood. doors are fair to good. small but ugly Dent in the hood and grill. no front bumper. 350 auto trans,ac, the glove compartment spec. sheet says something about camper but it's an 8ft bed not super long? what does that mean? good cab corners and floor, rockers just started to rust (original rockers) the bigest problem, there is a pin hole rust hole above the windshield inside and some rust in the channel on the roof of the cab where the chanel turns from above the windshield to the side of the cab. it has silicone in it. in the curve if i open the doors and look up there is rust under the channel where the doors close. but the cab looks good. supports are good and the floor (texas truck in VA)350 smokes a little with 5year old gas in it and wants to flood. When I got the truck i pored a little gas in the carb it started right up. the first time it's been stared in 5 years. I paid 100bucks! no rust in the tailgate on the outside very little inside. no dents around the tail lights. but the cab...humm. I just needed bedsides for my teenage son's truck but do you think this is more of a keeper for myself? I could swap the doors and bed then sell it. or keep it. HUMMM breaks suck but low of fluid the linkage is messed up drive doesn't read drive and it's hard to move the shifter lever. seat is trashed but foam and springs feel good. will the bedsides from the wood floor bed work on my sons steel floor bed? I haven't had time to compair i just got it and i don't keep the trucks at my house. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Aug 2003
Location: MN
Posts: 380
|
Re: Look at the deal I got! did i over pay?
No you didn't overpay lol... I say with only $100 into it so far you should fix it up. I also bought mine for $100 but yours sounds to be in much better shape...
__________________
1972 C10 1972 C20 ![]() |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jun 2007
Location: sandiego, ca
Posts: 453
|
Re: Look at the deal I got! did i over pay?
the problem its not what you paid for it practically it has been given away u have to make a to do list and work around a budget i guarantee you that once you start working on it you would no want to give it away
![]()
__________________
1966 chevy c-20 truck " La Chata " under construccion ![]() ![]() ![]() |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Aug 2003
Location: MN
Posts: 380
|
Re: Look at the deal I got! did i over pay?
Yeah they are addicting...but it's a good addiction.
__________________
1972 C10 1972 C20 ![]() |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Apr 2006
Location: va
Posts: 553
|
Re: Look at the deal I got! did i over pay?
I'm just concerned about the cab. I was really just looking for parts for my teenage son's truck.
if it wasn't for the cab's roof gutter having rust i would for sure keep it. it's really in better shape than the $1,500 truck we got for my son. (except for the roof) his floors were rusted out and the bed was dented more than you could dream of. I figure i could swap the bedside if it will work on my son's steel floor. swap the doors and resell the truck with enough profit to buy a set of rims for my son. or keep it and keep looking for a good bedside for him. the truck i drive is a crap 82 ford that has no power. i use it for trips to the dump. |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Apr 2006
Location: va
Posts: 553
|
Re: Look at the deal I got! did i over pay?
nice truck chevelle454 nice for 100bucks
I know that if i were to sink anouther 1400.00 in the truck it would be in far better shape than the $1500 truck my son started out with. I think I would be regret selling it. but i'm not rich and fixing two trucks would be expensive....i'm in virginia and it has taken me over a year to find a good bedside. I guss i could keep looking. |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Aug 2003
Location: MN
Posts: 380
|
Re: Look at the deal I got! did i over pay?
Ya gotta do what ya gotta do... that $100 truck has turned into a $3500 truck so far, and it's not finished.
__________________
1972 C10 1972 C20 ![]() |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jun 2007
Location: sandiego, ca
Posts: 453
|
Re: Look at the deal I got! did i over pay?
hey guys what can i said mine cost $ 400 a real bargain!!!!!!! yea right so far its turn out to be $3900 but its like chevelle said once you start working on it it becomes a good addiction see my pics i called it "El chuvy"
![]() http://good-times.webshots.com/photo...01604185CdlzDE
__________________
1966 chevy c-20 truck " La Chata " under construccion ![]() ![]() ![]() Last edited by fercho71; 06-25-2007 at 01:25 AM. |
![]() |
![]() |
![]() |
#9 |
Designated A-hole!
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,450
|
Re: Look at the deal I got! did i over pay?
It's worth more than that at the scrap yard, so you did good.
![]()
__________________
"If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. ![]() We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Aug 2003
Location: MN
Posts: 380
|
Re: Look at the deal I got! did i over pay?
I named mine "Cherole" because the v and t were missing on my tailgate that I bought for it... a lot of thought into that one lol
__________________
1972 C10 1972 C20 ![]() Last edited by Chevelle454; 06-25-2007 at 10:36 AM. |
![]() |
![]() |
![]() |
#11 |
Old Skool Club
![]() Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
|
Re: Look at the deal I got! did i over pay?
I would guess that you got a good deal, especially considering you live in the rust belt. A lack of rust is good, no matter where you live. The only negative factor in anything we do, is that whatever we THINK it's gonna cost to do the vehicle, my experience is that you can triple or quadruple that amount and be closer. The longer it takes to reach that point just adds to the cost, too.
Oh yeah, I'm so deep into my wallet that I'm glad I told the wife that "by the time I am finished, I could have bought a new truck". So far, I'm still doing good.
__________________
Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was. |
![]() |
![]() |
![]() |
#12 |
Senior Member
Join Date: Nov 2006
Location: Yukon Oklahoma
Posts: 2,647
|
Re: Look at the deal I got! did i over pay?
Yeah, you paid too much, and I'd be willing to bail you out.
![]() Nice start, keep us posted on the progress
__________________
Happiness is towing your "new" truck home. 1972 C-10 1982 GMC (parts truck??) ![]() 1969 c10 parts truck 1969 C-10 ( my sons) 1992 Silverado 4X4 (now the boys truck)(now mine again ![]() 2002 Tarus (my wife loves that car) |
![]() |
![]() |
![]() |
#13 | |
Long Fleet Club
Join Date: Aug 2006
Location: Deer Park, TX
Posts: 5,666
|
Re: Look at the deal I got! did i over pay?
Quote:
![]()
__________________
Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules |
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|