Console for radio/gauges - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Random Guy · 06-26-2007, 10:28 PM

I am playing around with the idea of making a diamond plate console to house my radio and extra guages. I really do not want to cut my dash and was thinking of something to really set off my cab. Has anyone done something similar and give me some tips I could use? I have a low hump, bench seat, and colum shift so there is plenty of room for the thing. I was also thinking of making some kind of lockable compartment for valubles on it and maybe some coaster slots? Any thoughts?

Longhorn Man · 06-26-2007, 11:06 PM

I've seen polished alluminum diamond plate used as door panels. Looked pretty awsome IMO. I had pics somewhere, but haven't seen them in ages (even when i just looked for them)

Random Guy · 06-26-2007, 11:12 PM

Well I was actually thinking of doing my door panels in diamond plate as well as my glove box and my original three hole gauge panel. I just think it would look awesome.

Longhorn Man · 06-27-2007, 12:00 AM

I would place rubber on the back side to keep it from rattling real bad.

topnos · 06-27-2007, 01:22 PM

You might be able to get some ideas from this website:
http://www.classictruckconsoles.com/index.htm

Random Guy · 06-27-2007, 01:30 PM

Cool thanks topnos

Random Guy · 06-28-2007, 08:45 PM

Ok, I played around with Google Sketchup and this is what I came up with. I havnt put the sides in yet so it is easier to see. The three holes on the top are for gauges and the rectangle in the middle is for a audio system. Obviously the two large holes are for drinks.

**LockDoc** · 06-28-2007, 09:07 PM

-
Maybe you could put speakers in the sides if it wouldn't make them too close together. I don't know anything about audio stuff so maybe I'm all wet....

LockDoc

Random Guy · 06-28-2007, 09:11 PM

Quote:

Originally Posted by LockDoc

-
Maybe you could put speakers in the sides if it wouldn't make them too close together. I don't know anything about audio stuff so maybe I'm all wet....

LockDoc

I was thinking of that or piping out my ac thru some louvers since the console could block my underdash vent.

cdowns · 06-28-2007, 09:24 PM

i like your idea but you should rethink gauge placement to somewhere that you'll be able to see them

Random Guy · 06-28-2007, 09:28 PM

Quote:

Originally Posted by cdowns

i like your idea but you should rethink gauge placement to somewhere that you'll be able to see them

Maybe more off an angle on the guage lane? I really want to keep my three hole and dont want a hanger off the dash

Random Guy · 06-29-2007, 12:13 AM

One other thing I thought about with this setup. I could also put an LCD screen for DVD in the space near the cup holders if I wanted to.

brak · 06-29-2007, 06:28 AM

here's what i've been thinking

Random Guy · 06-29-2007, 09:22 AM

That looks really great Brak. Is the top slot for a deck? If so it looks a little shallow, but other than that I love it. Can I steal it from you?

cdowns · 06-29-2007, 10:17 AM

braks brings the gauges more out from under the dash and the angle is alot better for seeing the gauges

cstanley · 06-29-2007, 03:17 PM

sure is big compared to that lit'l ol' man...

"what lit'l ol' man?

THAT lit'l ol' man.

Oh, he belongs to Paul.

He's very clean."

Ackattack · 06-29-2007, 03:31 PM

here is my console....I won't be using it any more, but may give you some ideas

Originally I was going to put at least a trans temp gauge in the panel below the A/C controls but never got to it. Also, the part you can't see between the bucket seats houses a 10" sub and amp. Its kind contoured like the "waterfall" in the corvette 'verts.

PanelDeland · 06-29-2007, 06:31 PM

Random guy,I would also suggest you move the drink holders,maybe closer to the seat for easier reach.Then the extra space could be boxed and used as a lock-up.

brak · 07-05-2007, 04:26 PM

Quote:

Originally Posted by Random Guy

That looks really great Brak. Is the top slot for a deck? If so it looks a little shallow, but other than that I love it. Can I steal it from you?

Thanks, it's not to scale, more of a "proof of concept"

feel free to use it, but you better not claim i copied you when i build mine

06-26-2007, 10:28 PM	#1
Random Guy Registered User Join Date: Feb 2007 Location: Tyler, Texas Posts: 119	Console for radio/gauges I am playing around with the idea of making a diamond plate console to house my radio and extra guages. I really do not want to cut my dash and was thinking of something to really set off my cab. Has anyone done something similar and give me some tips I could use? I have a low hump, bench seat, and colum shift so there is plenty of room for the thing. I was also thinking of making some kind of lockable compartment for valubles on it and maybe some coaster slots? Any thoughts? __________________ CARPE CERVASIUM! 1968 C10 Fleetside LWB Remember Cthulu is watching you! / (@) (@) \

06-26-2007, 11:06 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Console for radio/gauges I've seen polished alluminum diamond plate used as door panels. Looked pretty awsome IMO. I had pics somewhere, but haven't seen them in ages (even when i just looked for them)

06-26-2007, 11:12 PM	#3
Random Guy Registered User Join Date: Feb 2007 Location: Tyler, Texas Posts: 119	Re: Console for radio/gauges Well I was actually thinking of doing my door panels in diamond plate as well as my glove box and my original three hole gauge panel. I just think it would look awesome. __________________ CARPE CERVASIUM! 1968 C10 Fleetside LWB Remember Cthulu is watching you! / (@) (@) \

06-27-2007, 12:00 AM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Console for radio/gauges I would place rubber on the back side to keep it from rattling real bad.

06-27-2007, 01:22 PM	#5
topnos Registered User Join Date: Mar 2007 Location: Houston, TX Posts: 46	Re: Console for radio/gauges You might be able to get some ideas from this website: http://www.classictruckconsoles.com/index.htm __________________ 70 C-10 350/700R4, 2.5/4 drop to be completed by 12/07

06-27-2007, 01:30 PM	#6
Random Guy Registered User Join Date: Feb 2007 Location: Tyler, Texas Posts: 119	Re: Console for radio/gauges Cool thanks topnos __________________ CARPE CERVASIUM! 1968 C10 Fleetside LWB Remember Cthulu is watching you! / (@) (@) \

06-28-2007, 08:45 PM	#7
Random Guy Registered User Join Date: Feb 2007 Location: Tyler, Texas Posts: 119	Re: Console for radio/gauges Ok, I played around with Google Sketchup and this is what I came up with. I havnt put the sides in yet so it is easier to see. The three holes on the top are for gauges and the rectangle in the middle is for a audio system. Obviously the two large holes are for drinks. Attached Images __________________ CARPE CERVASIUM! 1968 C10 Fleetside LWB Remember Cthulu is watching you! / (@) (@) \

06-28-2007, 09:07 PM	#8
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,772	Re: Console for radio/gauges - Maybe you could put speakers in the sides if it wouldn't make them too close together. I don't know anything about audio stuff so maybe I'm all wet.... LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

06-28-2007, 09:24 PM	#10
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Console for radio/gauges i like your idea but you should rethink gauge placement to somewhere that you'll be able to see them __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

06-29-2007, 12:13 AM	#12
Random Guy Registered User Join Date: Feb 2007 Location: Tyler, Texas Posts: 119	Re: Console for radio/gauges One other thing I thought about with this setup. I could also put an LCD screen for DVD in the space near the cup holders if I wanted to. __________________ CARPE CERVASIUM! 1968 C10 Fleetside LWB Remember Cthulu is watching you! / (@) (@) \

06-29-2007, 06:28 AM	#13
brak Registered User Join Date: Apr 2006 Location: MinneSNOWta Posts: 1,381	Re: Console for radio/gauges here's what i've been thinking __________________ 2003 GMC Sierra 1500 WT 1995 Nissan Hardbody 2016 Hyundai Veloster Turbo DC2 (SW/AW) Clyde W. Harvey USN "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill

06-29-2007, 09:22 AM	#14
Random Guy Registered User Join Date: Feb 2007 Location: Tyler, Texas Posts: 119	Re: Console for radio/gauges That looks really great Brak. Is the top slot for a deck? If so it looks a little shallow, but other than that I love it. Can I steal it from you? __________________ CARPE CERVASIUM! 1968 C10 Fleetside LWB Remember Cthulu is watching you! / (@) (@) \

06-29-2007, 10:17 AM	#15
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Console for radio/gauges braks brings the gauges more out from under the dash and the angle is alot better for seeing the gauges __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

06-29-2007, 03:17 PM	#16
cstanley Senior Member Join Date: Oct 2005 Location: Austin, TX Posts: 1,229	Re: Console for radio/gauges sure is big compared to that lit'l ol' man... "what lit'l ol' man? THAT lit'l ol' man. Oh, he belongs to Paul. He's very clean." __________________ "Anybody who would paint his truck like this, would go to a minister's funeral dressed in feathers!" - Big Enis Burdett '72 Blazer Restoration Blog: http://sportchicken.blogspot.com/

06-29-2007, 03:31 PM	#17
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,524	Re: Console for radio/gauges here is my console....I won't be using it any more, but may give you some ideas Originally I was going to put at least a trans temp gauge in the panel below the A/C controls but never got to it. Also, the part you can't see between the bucket seats houses a 10" sub and amp. Its kind contoured like the "waterfall" in the corvette 'verts. __________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index



Register or Log In To remove these advertisements.

06-29-2007, 06:31 PM	#18
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: Console for radio/gauges Random guy,I would also suggest you move the drink holders,maybe closer to the seat for easier reach.Then the extra space could be boxed and used as a lock-up. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.