68 chevrolet parts sheetmetal nice TX - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72highlander · 07-10-2007, 08:57 PM

i bought a parts truck that had the front knocked off of it. i saw this truck run around for years and it was clean, what a shame. all parts are original paint, what you see is what you get. the cab had a limb fall on it and dent cowl and roof slightly and one very small dent in back of cab where bed hit it. it has minor rust in passenger vent and kick panel, but other than that it is super straight and rust free. dash has not been cut. doors are super. straight, rust free, and not speaker holes. driver door has one small spot that is an easy repair. hood is mint as far as i can tell, super straight and no dents or dings. bedsides are very nice and straight, rust free, each side has a very small dent. tailgate has dents on inside and top and some rust at bottom, but outside is very straight. would be a good candidate for a spray liner. i will be keeping the bed floor and head gate. have 5 six hole rallyes, and four matching tires with good tread. any questions feel free to ask. i am located in brownwood, tx.

cab complete with doors-$500
bedsides-$200 each
hood-$200
tailgate-$75
wheels/tires-$125

shipping would be hard for most items, but if you have any ideas then let me know. thanks in advance. please respond in thread so there are no misunderstandings. i also don't want to part any further than items listed.

72highlander · 07-10-2007, 08:59 PM

more cab pics

72highlander · 07-10-2007, 09:02 PM

even more cab pics

72highlander · 07-10-2007, 09:02 PM

few more of cab

72highlander · 07-10-2007, 09:05 PM

bedside pictures

72highlander · 07-10-2007, 09:05 PM

hood

72highlander · 07-10-2007, 09:06 PM

tailgate

72highlander · 07-10-2007, 09:09 PM

wheels

xshadow · 07-10-2007, 09:11 PM

If you can find a way to ship the passenger side bedside i'm interested...maybe roadway...a furniture moving company? or greyhound

72highlander · 07-10-2007, 09:28 PM

i'll check into, may be a few days on it, i'm moving it tomorrow and will have to take bedsides off, but will asap. thanks!

1970bowtie · 07-10-2007, 10:05 PM

what would you take for the tail gate, and where is Early?

HOTFUN · 07-10-2007, 10:21 PM

If you change your mind on selling other items I would be interested in the left hand and right hand air conditioning dash ball vent assemblies. Mark

72highlander · 07-11-2007, 01:19 AM

1970bowtie, early and brownwood are same, i am 70 miles from abilene.

**ScottH** · 07-11-2007, 12:51 PM

Interested in selling gauge cluster?

Cochise · 07-11-2007, 11:22 PM

Tailgate and passenger door (depending on rust on inside and underside of door) to Rogers, Ar 72758? Better pictures, please?

72highlander · 07-11-2007, 11:41 PM

would like to sell cab as whole, i don't want to take parts off and have other stuff get wet and ruined. i will get better pics of tailgate.

1970bowtie · 07-14-2007, 11:55 PM

70 miles which direction of abilene? hopefully west

72highlander · 07-17-2007, 11:08 PM

1970bowtie, yes i am west of abilene, 60 miles south of stephenville on 377. sorry for the slow reply, havn't been close to computer lately

1970bowtie · 07-18-2007, 11:58 AM

no rush,i was in nacogdoches 2 weeks ago, wish i would of known.i could probley make a trip down there if the price is right.which brings me to my next question, what are you asking for it.
i would also like to buy the complete tail light and reverse light assembly if your interested in spliting them up

1970bowtie · 07-26-2007, 02:51 PM

i know your not on here much. but im interested in that tail gate,think you could get me some more pics?

1970bowtie · 07-26-2007, 09:13 PM

ttt

07-10-2007, 08:57 PM	#1
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	68 chevrolet parts sheetmetal nice TX i bought a parts truck that had the front knocked off of it. i saw this truck run around for years and it was clean, what a shame. all parts are original paint, what you see is what you get. the cab had a limb fall on it and dent cowl and roof slightly and one very small dent in back of cab where bed hit it. it has minor rust in passenger vent and kick panel, but other than that it is super straight and rust free. dash has not been cut. doors are super. straight, rust free, and not speaker holes. driver door has one small spot that is an easy repair. hood is mint as far as i can tell, super straight and no dents or dings. bedsides are very nice and straight, rust free, each side has a very small dent. tailgate has dents on inside and top and some rust at bottom, but outside is very straight. would be a good candidate for a spray liner. i will be keeping the bed floor and head gate. have 5 six hole rallyes, and four matching tires with good tread. any questions feel free to ask. i am located in brownwood, tx. cab complete with doors-$500 bedsides-$200 each hood-$200 tailgate-$75 wheels/tires-$125 shipping would be hard for most items, but if you have any ideas then let me know. thanks in advance. please respond in thread so there are no misunderstandings. i also don't want to part any further than items listed. Attached Images __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6

07-10-2007, 08:59 PM	#2
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: 68 chevrolet parts sheetmetal nice TX more cab pics Attached Images __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6

07-10-2007, 09:02 PM	#3
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: 68 chevrolet parts sheetmetal nice TX even more cab pics Attached Images __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6

07-10-2007, 09:02 PM	#4
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: 68 chevrolet parts sheetmetal nice TX few more of cab Attached Images __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6 Last edited by 72highlander; 07-10-2007 at 09:03 PM.

07-10-2007, 09:05 PM	#5
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: 68 chevrolet parts sheetmetal nice TX bedside pictures Attached Images __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6

07-10-2007, 09:06 PM	#7
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: 68 chevrolet parts sheetmetal nice TX tailgate Attached Images __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6 Last edited by 72highlander; 07-10-2007 at 09:10 PM.

07-10-2007, 09:09 PM	#8
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: 68 chevrolet parts sheetmetal nice TX wheels Attached Images __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6

07-10-2007, 09:11 PM	#9
xshadow Registered User Join Date: Apr 2006 Location: va Posts: 553	Re: 68 chevrolet parts sheetmetal nice TX If you can find a way to ship the passenger side bedside i'm interested...maybe roadway...a furniture moving company? or greyhound

07-10-2007, 09:28 PM	#10
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: 68 chevrolet parts sheetmetal nice TX i'll check into, may be a few days on it, i'm moving it tomorrow and will have to take bedsides off, but will asap. thanks! __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6

07-10-2007, 10:05 PM	#11
1970bowtie Senior Member Join Date: Apr 2007 Location: East Texas Posts: 549	Re: 68 chevrolet parts sheetmetal nice TX what would you take for the tail gate, and where is Early? __________________ Justin 1970 c/10 short wide bed My build thread WTT 1970 chevy front end for 67/68 chevy front end WTT 2 15x10 american racing outlaw 2 wheels for 2 of the same in a 15x7 or 15x8

07-10-2007, 10:21 PM	#12
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Re: 68 chevrolet parts sheetmetal nice TX If you change your mind on selling other items I would be interested in the left hand and right hand air conditioning dash ball vent assemblies. Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

07-11-2007, 01:19 AM	#13
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: 68 chevrolet parts sheetmetal nice TX 1970bowtie, early and brownwood are same, i am 70 miles from abilene. __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6

07-11-2007, 12:51 PM	#14
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: 68 chevrolet parts sheetmetal nice TX Interested in selling gauge cluster? __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

07-11-2007, 11:22 PM	#15
Cochise Junior Member Join Date: Apr 2006 Location: Rogers, AR Posts: 298	Re: 68 chevrolet parts sheetmetal nice TX Tailgate and passenger door (depending on rust on inside and underside of door) to Rogers, Ar 72758? Better pictures, please?

07-11-2007, 11:41 PM	#16
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: 68 chevrolet parts sheetmetal nice TX would like to sell cab as whole, i don't want to take parts off and have other stuff get wet and ruined. i will get better pics of tailgate. __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6



Register or Log In To remove these advertisements.

07-14-2007, 11:55 PM	#17
1970bowtie Senior Member Join Date: Apr 2007 Location: East Texas Posts: 549	Re: 68 chevrolet parts sheetmetal nice TX 70 miles which direction of abilene? hopefully west __________________ Justin 1970 c/10 short wide bed My build thread WTT 1970 chevy front end for 67/68 chevy front end WTT 2 15x10 american racing outlaw 2 wheels for 2 of the same in a 15x7 or 15x8

07-17-2007, 11:08 PM	#18
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: 68 chevrolet parts sheetmetal nice TX 1970bowtie, yes i am west of abilene, 60 miles south of stephenville on 377. sorry for the slow reply, havn't been close to computer lately __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6

07-18-2007, 11:58 AM	#19
1970bowtie Senior Member Join Date: Apr 2007 Location: East Texas Posts: 549	Re: 68 chevrolet parts sheetmetal nice TX no rush,i was in nacogdoches 2 weeks ago, wish i would of known.i could probley make a trip down there if the price is right.which brings me to my next question, what are you asking for it. i would also like to buy the complete tail light and reverse light assembly if your interested in spliting them up __________________ Justin 1970 c/10 short wide bed My build thread WTT 1970 chevy front end for 67/68 chevy front end WTT 2 15x10 american racing outlaw 2 wheels for 2 of the same in a 15x7 or 15x8

07-26-2007, 02:51 PM	#20
1970bowtie Senior Member Join Date: Apr 2007 Location: East Texas Posts: 549	Re: 68 chevrolet parts sheetmetal nice TX i know your not on here much. but im interested in that tail gate,think you could get me some more pics? __________________ Justin 1970 c/10 short wide bed My build thread WTT 1970 chevy front end for 67/68 chevy front end WTT 2 15x10 american racing outlaw 2 wheels for 2 of the same in a 15x7 or 15x8

07-26-2007, 09:13 PM	#21
1970bowtie Senior Member Join Date: Apr 2007 Location: East Texas Posts: 549	Re: 68 chevrolet parts sheetmetal nice TX ttt __________________ Justin 1970 c/10 short wide bed My build thread WTT 1970 chevy front end for 67/68 chevy front end WTT 2 15x10 american racing outlaw 2 wheels for 2 of the same in a 15x7 or 15x8

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.