dana 44 front axles: 3.07 carrier differ from 3.73 ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Fast68Chevy* · 09-20-2002, 05:59 PM

anyone know for sure if dana 44 3.07 front carriers differ in series from 3.73 carriers ?

i know they do in 12 bolt axle,s but do they in dana 44 ?

thanks

BLAZERMAN · 09-20-2002, 07:15 PM

Same carrier, there are only 2 carriers for the dana 44, 2.87-3.73 and 3.92-5.89

*Fast68Chevy* · 09-21-2002, 03:36 AM

yeah i finally found that out after digging around at ransys ring and pinion site

i like dana carrier breaks alot better than eaton axles...

thanks!

09-20-2002, 05:59 PM	#1
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	dana 44 front axles: 3.07 carrier differ from 3.73 ? anyone know for sure if dana 44 3.07 front carriers differ in series from 3.73 carriers ? i know they do in 12 bolt axle,s but do they in dana 44 ? thanks

09-20-2002, 07:15 PM	#2
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Same carrier, there are only 2 carriers for the dana 44, 2.87-3.73 and 3.92-5.89 __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-21-2002, 03:36 AM	#3
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	yeah i finally found that out after digging around at ransys ring and pinion site i like dana carrier breaks alot better than eaton axles... thanks!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.