Air Suspension Help Needed... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigo181979 · 07-16-2007, 05:39 PM

I think I have decided that I want to go with air ride now. I already have all the stuff that comes in the A.R.T. kits but the bags, cups and plates. My question is: is their some where I can just by the front and rear bags and cups and plates for my truck (1968), I am just trying to save a buck by not buying parts twice. Any ideas, w/ part #'s, would be appreciated.

LUV2XCLR8 · 07-16-2007, 05:42 PM

www.*****************

bigo181979 · 07-17-2007, 12:42 PM

What brand of bags seems to be the best quality, and I mean ride quality too. I don't know to much about air suspension so I am trying to learn. Also how do you attach the rear bags? I saw the plates and cups for the front but what do you do on the rear???

bones · 07-17-2007, 12:44 PM

slam specialties are probably the best bags out there... your going to want to use the 8in bags. and depending on how you want it setup you can do bag over axel or bag on bar

bigo181979 · 07-17-2007, 01:18 PM

I was thinking bag on bar would probably be the way I want to go. I am not intrested in putting in a 8" notch or cutting up my bed and stuff I want the truck to look like it came that way from the factory. I have a cpp c-notch already for the rear.

So how do you go about mounting the bags where the stock springs were?

SCOTI · 07-17-2007, 04:58 PM

Quote:

Originally Posted by bigo181979

So how do you go about mounting the bags where the stock springs were?

The bottom of the bag bolts right in like the stock springs on the trailing arm. For the top of the bag (where the air fitting is), you'll need to drill the 3 required holes in the bottom of the frame.

bigo181979 · 07-17-2007, 06:06 PM

I was looking at the slam specialties bags and I see they make 3 different psi rated bags a 200, 400, and 600 psi bags, I plan on still pulling a boat trailer on the weekend with my truck so what would be best and do I run the same size and psi rating bags front and rear, say 400 psi??? the boat ways about 4000lbs and my half ton silverado pulls it great and dosen't squat but about an inch or two. Oh and I am running a small block in my truck in case that matters.

Spray-Bomb · 07-17-2007, 07:51 PM

I plan to pull a 4000 lb. trencher with my truck and am waiting on my Re-7's to come in

I'm gonna be run'n Re-7s all the way around

I dunno why you would want to run a Re-8, like Bones suggested

skunkwerx · 07-18-2007, 09:27 AM

this is the bracket i made so i didnt have ot drill holes in the frame.

bigo181979 · 07-18-2007, 11:06 AM

Skunkwerx, do you have a pic of your truck all aired out? About how far are you from laying crossmember/frame and what size tire you running? What bags are you running also?

skunkwerx · 07-18-2007, 01:14 PM

what size wheel do you want to see on it,i have pics of 18/20,20/22,20s&15" with with walls?bags are firestone 2600lb.

bigo181979 · 07-18-2007, 04:42 PM

The 20/22" combo, I am looking at actually running 22" all the way around on mine. Are you running a c-notch or a step notch?

skunkwerx · 07-18-2007, 11:15 PM

the front still has the inner fenderwells,about 1.5"off the ground.the back is just a bolt in c-notch.

BigShoe24 · 07-19-2007, 03:24 AM

Looks good skunkwerx, Were in Oklahoma are you from?

drbyrdman · 07-19-2007, 08:35 AM

Quote:

Originally Posted by skunkwerx

the front still has the inner fenderwells,about 1.5"off the ground.the back is just a bolt in c-notch.

I want my 67 to sit like yours. What did you do? I see a c-notch. Spindles up front?

bigo181979 · 07-19-2007, 10:01 AM

What size tires you running front and rear???

skunkwerx · 07-19-2007, 10:03 AM

i live in sayre, ok west on I-40.

in front i have spindels,bag in place of coils.in the rear i have bolt in c-notch,2"lowering blocks,extended pan bar,bag in place of coils&1.5"spacer on top of bags.

skunkwerx · 07-19-2007, 10:05 AM

this is a pic of the front crossmember with 18/20"wheels on it.

Spray-Bomb · 07-19-2007, 05:11 PM

What is the total hight of your front tires ???

And at dump are you rubbing your inner fenders

skunkwerx · 07-20-2007, 10:23 AM

245/35/18 dont know how tall it is off hand,but no it dnt hit the inner fender.

chevydog66 · 07-20-2007, 01:19 PM

The 1.5" spacer on top of the bags? Is that in the front or back? Does that make it lower?

1LoC10 · 07-20-2007, 02:53 PM

how about 22's and 24's... oh yeah

SCOTI · 07-20-2007, 03:57 PM

Quote:

Originally Posted by chevydog66

The 1.5" spacer on top of the bags? Is that in the front or back? Does that make it lower?

The 'spacer' is for the rear bags.
It does not make it lower.

The 'spacer' makes it easier to install the bags because it eliminates the need to drill the required holes in the bottom of the frame rail.

Spray-Bomb · 07-20-2007, 05:21 PM

skunkwerx

Can I get you to measure how tall the tires are

Also, what drop spindles do you have 2" 3" ???

MrShelley · 07-20-2007, 05:33 PM

245/35/18 = 24.75" tall

07-16-2007, 05:39 PM	#1
bigo181979 Junior Member Join Date: Jan 2007 Location: wichita, ks Posts: 242	Air Suspension Help Needed... I think I have decided that I want to go with air ride now. I already have all the stuff that comes in the A.R.T. kits but the bags, cups and plates. My question is: is their some where I can just by the front and rear bags and cups and plates for my truck (1968), I am just trying to save a buck by not buying parts twice. Any ideas, w/ part #'s, would be appreciated.

07-16-2007, 05:42 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Air Suspension Help Needed... www.***************** __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-17-2007, 12:42 PM	#3
bigo181979 Junior Member Join Date: Jan 2007 Location: wichita, ks Posts: 242	Re: Air Suspension Help Needed... What brand of bags seems to be the best quality, and I mean ride quality too. I don't know to much about air suspension so I am trying to learn. Also how do you attach the rear bags? I saw the plates and cups for the front but what do you do on the rear???

07-17-2007, 12:44 PM	#4
bones Registered User Join Date: Mar 2006 Location: Weatherford, Tx Posts: 11	Re: Air Suspension Help Needed... slam specialties are probably the best bags out there... your going to want to use the 8in bags. and depending on how you want it setup you can do bag over axel or bag on bar

07-17-2007, 01:18 PM	#5
bigo181979 Junior Member Join Date: Jan 2007 Location: wichita, ks Posts: 242	Re: Air Suspension Help Needed... I was thinking bag on bar would probably be the way I want to go. I am not intrested in putting in a 8" notch or cutting up my bed and stuff I want the truck to look like it came that way from the factory. I have a cpp c-notch already for the rear. So how do you go about mounting the bags where the stock springs were?

07-17-2007, 06:06 PM	#7
bigo181979 Junior Member Join Date: Jan 2007 Location: wichita, ks Posts: 242	Re: Air Suspension Help Needed... I was looking at the slam specialties bags and I see they make 3 different psi rated bags a 200, 400, and 600 psi bags, I plan on still pulling a boat trailer on the weekend with my truck so what would be best and do I run the same size and psi rating bags front and rear, say 400 psi??? the boat ways about 4000lbs and my half ton silverado pulls it great and dosen't squat but about an inch or two. Oh and I am running a small block in my truck in case that matters.

07-17-2007, 07:51 PM	#8
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Air Suspension Help Needed... I plan to pull a 4000 lb. trencher with my truck and am waiting on my Re-7's to come in I'm gonna be run'n Re-7s all the way around I dunno why you would want to run a Re-8, like Bones suggested __________________ Just not low enough... ----------------------------- Sinister Killer

07-18-2007, 09:27 AM	#9
skunkwerx Registered User Join Date: Oct 2006 Location: oklahoma Posts: 238	Re: Air Suspension Help Needed... this is the bracket i made so i didnt have ot drill holes in the frame. Attached Images

07-18-2007, 11:06 AM	#10
bigo181979 Junior Member Join Date: Jan 2007 Location: wichita, ks Posts: 242	Re: Air Suspension Help Needed... Skunkwerx, do you have a pic of your truck all aired out? About how far are you from laying crossmember/frame and what size tire you running? What bags are you running also?

07-18-2007, 01:14 PM	#11
skunkwerx Registered User Join Date: Oct 2006 Location: oklahoma Posts: 238	Re: Air Suspension Help Needed... what size wheel do you want to see on it,i have pics of 18/20,20/22,20s&15" with with walls?bags are firestone 2600lb.

07-18-2007, 04:42 PM	#12
bigo181979 Junior Member Join Date: Jan 2007 Location: wichita, ks Posts: 242	Re: Air Suspension Help Needed... The 20/22" combo, I am looking at actually running 22" all the way around on mine. Are you running a c-notch or a step notch? Last edited by bigo181979; 07-18-2007 at 04:44 PM.

07-18-2007, 11:15 PM	#13
skunkwerx Registered User Join Date: Oct 2006 Location: oklahoma Posts: 238	Re: Air Suspension Help Needed... the front still has the inner fenderwells,about 1.5"off the ground.the back is just a bolt in c-notch. Attached Images

07-19-2007, 03:24 AM	#14
BigShoe24 True Addiction Join Date: Nov 2005 Location: FTL Posts: 415	Re: Air Suspension Help Needed... Looks good skunkwerx, Were in Oklahoma are you from?

07-19-2007, 10:01 AM	#16
bigo181979 Junior Member Join Date: Jan 2007 Location: wichita, ks Posts: 242	Re: Air Suspension Help Needed... What size tires you running front and rear???

07-19-2007, 10:03 AM	#17
skunkwerx Registered User Join Date: Oct 2006 Location: oklahoma Posts: 238	Re: Air Suspension Help Needed... i live in sayre, ok west on I-40. in front i have spindels,bag in place of coils.in the rear i have bolt in c-notch,2"lowering blocks,extended pan bar,bag in place of coils&1.5"spacer on top of bags.



Register or Log In To remove these advertisements.

07-19-2007, 10:05 AM	#18
skunkwerx Registered User Join Date: Oct 2006 Location: oklahoma Posts: 238	Re: Air Suspension Help Needed... this is a pic of the front crossmember with 18/20"wheels on it. Attached Images

07-19-2007, 05:11 PM	#19
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Air Suspension Help Needed... What is the total hight of your front tires ??? And at dump are you rubbing your inner fenders __________________ Just not low enough... ----------------------------- Sinister Killer

07-20-2007, 10:23 AM	#20
skunkwerx Registered User Join Date: Oct 2006 Location: oklahoma Posts: 238	Re: Air Suspension Help Needed... 245/35/18 dont know how tall it is off hand,but no it dnt hit the inner fender.

07-20-2007, 01:19 PM	#21
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: Air Suspension Help Needed... The 1.5" spacer on top of the bags? Is that in the front or back? Does that make it lower? __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

07-20-2007, 02:53 PM	#22
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: Air Suspension Help Needed... how about 22's and 24's... oh yeah Attached Images __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

07-20-2007, 05:21 PM	#24
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Air Suspension Help Needed... skunkwerx Can I get you to measure how tall the tires are Also, what drop spindles do you have 2" 3" ??? __________________ Just not low enough... ----------------------------- Sinister Killer

07-20-2007, 05:33 PM	#25
MrShelley Too Many Clubs Club Join Date: Jul 2003 Location: Kilgore, Texas Posts: 443	Re: Air Suspension Help Needed... 245/35/18 = 24.75" tall __________________ How I installed my air bags...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.