07-21-2007, 03:11 PM | #1 |
The Peacemaker
Join Date: Feb 2005
Location: Kannapolis, NC
Posts: 783
|
Progress
My progress so far
I'm currently deciding that I'm probably gonna have to run an electric fan from the looks of it. Big Things left to do: 1. Figure out how to mount the BB radiator when there are no support holes in the radiator for its cover. 2. Bolt up the exhaust manifolds 3. Install all the vacuum and heater stuff on the intake, install the dizzy, and fasten down the carb. 4. Figure out what to do with the water pump, its pulley and the fan setup...this includes the figuring out how I'm gonna fasten the pulley on the pump. Usually I've noticed it's studs, but I tend to have horrible luck installing them.
__________________
1978 Chevy 2wd Stepside aka "Audrey" Cordova brown with mandarin guts 79k original miles & being restored 1979 Chevy 2wd Short Wide aka "Emma-Jayne" Cordova brown with mandarin guts 2019 Chevy Tahoe LT Previous rides: -2002 Firehawk T/A, 2006 Trailblazer SS AWD, 2014 GMC Sierra RCSB, 1971 2wd Blazer, 1996 SNB, 1997 2dr 2wd Yukon, 2001 Silverado RCSB, 2011 Silverado Z71 4x4, 1982 2wd Blazer, 1997 2dr Tahoe, 1970 Chevelle SS, 1972 2wd Blazer, 1986 Silverado Stepside, 1995 S-10, 1985 Silverado SWB. |
07-21-2007, 07:41 PM | #2 |
Registered User
Join Date: Sep 2005
Location: Sun City West, Az
Posts: 3,822
|
Re: Progress
sweet.............look's good.....that coming home to longview.
__________________
" Never look up a dead dogs butt." |
07-21-2007, 10:12 PM | #3 |
67 Chevy Stepside
Join Date: Mar 2007
Location: Jonesville NC
Posts: 836
|
Re: Progress
looking god to me
__________________
1967 Chevy stepside 1976 BIG DOOLEY 454 turbo 400 4:11 |
07-21-2007, 11:14 PM | #4 |
Dark Heart Motorsports
Join Date: Apr 2007
Location: 29404 DKFX
Posts: 683
|
Re: Progress
do a custom shroud like I did for my 83...it was the only way I could get the shroud to go back on after I put in a 19 inch 4 core radiator...just trim and solder to fit as needed...and if ya mess it up, shrouds are a dime a dozen at junkyards
__________________
How Deep Can YOU Bleed..? 1985 Chevy Blazer K5- 6.2 N/A, 400 turbo trans CUCV, 12v converted... a new chapter 2005 GMC Sierra Crew Cab 6.0 powwwaa!!! custom jumpseat install w/ captain seats, Hypertech tuner, MSD Blaster Coils, CB and twin antenna's, all electric interior, touch screen in dash. custom center console, with jump seat replacing original console. 1500 HD! |
07-22-2007, 12:37 AM | #5 | |
Strange Cousin From The West..
Join Date: Jul 2007
Location: Walla Walla, Wa
Posts: 248
|
Re: Progress
Quote:
Last edited by Shaffer4; 07-22-2007 at 12:41 AM. |
|
07-22-2007, 12:40 AM | #6 |
THE VILLIAGE IDIOT
Join Date: Nov 2006
Location: Tooele, Utah
Posts: 1,405
|
Re: Progress
good looking engine...
__________________
honestly honey,,i have no idea how that truck got here. |
07-22-2007, 06:03 PM | #7 | |
The Peacemaker
Join Date: Feb 2005
Location: Kannapolis, NC
Posts: 783
|
Re: Progress
Quote:
Do you have any pics of your mount cause the picture looks like a stock chevy truck? Because my radiator is monstrous and was suppose to be a direct fit....phhhht. Would I see a lot of overheating problems if I stuck the old radiator back in?
__________________
1978 Chevy 2wd Stepside aka "Audrey" Cordova brown with mandarin guts 79k original miles & being restored 1979 Chevy 2wd Short Wide aka "Emma-Jayne" Cordova brown with mandarin guts 2019 Chevy Tahoe LT Previous rides: -2002 Firehawk T/A, 2006 Trailblazer SS AWD, 2014 GMC Sierra RCSB, 1971 2wd Blazer, 1996 SNB, 1997 2dr 2wd Yukon, 2001 Silverado RCSB, 2011 Silverado Z71 4x4, 1982 2wd Blazer, 1997 2dr Tahoe, 1970 Chevelle SS, 1972 2wd Blazer, 1986 Silverado Stepside, 1995 S-10, 1985 Silverado SWB. Last edited by BabyBlue; 07-22-2007 at 06:05 PM. |
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|