help on gas tank - The 1947 - Present Chevrolet & GMC Truck Message Board Network

50272 · 04-29-2002, 08:53 PM

Putting blazer gas tank on short bed. Saw pictures on here one time that someone had. Any help on finding this would be appreciated.

------------------

Kas68c10 · 04-30-2002, 05:10 PM

Does it fit ? I read on the board our short beds were too short for a blazer tank. I used one from an old camaro I think. Gmcpauls website has a tech tip section and if you can search the archives you should find lots on it. It is a common topic.

------------------
1968 SWB Stepside, pwr disc brake and tilt pwr steering, 5 spd tranny, HEI,Accel coil,K&N filter,3 bolt seatbelts, original i6 and wood bed, seat from an 89 Chevy, front and rear sway bars, moved gas tank to under the bed, headman hedders, new chrome bumpers,one wire alternator,WORK IN PROGRESS,Daily driver, 20 MPG, Freeland MI

**John Fabris** · 04-30-2002, 05:35 PM

I have some photos on my web page of a gas tank that I got from a 62 suburban. Was a bolt in job after removing the spare tire crossmember. Still have not started the project of running the filler over and up into the rear stake pocket and out the tilting taillight. I know a couple of guys are waiting for me to do this, May is the month I will get it done, Danit!!!

------------------
John Fabris
john.fabris@autodesk.com
1967 C10 SWB FleetSide Web Page
1971 K5 Blazer 2WD (basket case, but give me two year or so.)

50272 · 04-30-2002, 06:05 PM

the fitting of the gas tank is not what I need.I am wanting to run the fill neck behind the running light on the drivers side bed. Sorry I should have been more clear on this. I saw some pictures on here I think on how a guy did it with s-10 filler neck. Any help on this would be appreciated

CARS4567 · 04-30-2002, 06:13 PM

GO TO WES'S BOARD AT CLASSIC HEARTBEAT-

50272 · 04-30-2002, 06:14 PM

Thanks.

04-29-2002, 08:53 PM	#1
50272 Registered User Join Date: Apr 2002 Location: Waverly ,Tn Posts: 27	help on gas tank Putting blazer gas tank on short bed. Saw pictures on here one time that someone had. Any help on finding this would be appreciated. ------------------

04-30-2002, 05:10 PM	#2
Kas68c10 Registered User Join Date: Apr 2000 Location: Freeland,Michigan,USA Posts: 312	Does it fit ? I read on the board our short beds were too short for a blazer tank. I used one from an old camaro I think. Gmcpauls website has a tech tip section and if you can search the archives you should find lots on it. It is a common topic. ------------------ 1968 SWB Stepside, pwr disc brake and tilt pwr steering, 5 spd tranny, HEI,Accel coil,K&N filter,3 bolt seatbelts, original i6 and wood bed, seat from an 89 Chevy, front and rear sway bars, moved gas tank to under the bed, headman hedders, new chrome bumpers,one wire alternator,WORK IN PROGRESS,Daily driver, 20 MPG, Freeland MI __________________ 1968 SWB Stepside, 250,pwr disc brake and tilt pwr steering, 5 spd tranny, HEI,Accel coil,K&N filter,Seat from a later truck with built in seatbelts, front and rear sway bars, moved gas tank to under the bed, headman hedders, new chrome bumpers,one wire alternator,Weber k550cub carburator...WORK IN PROGRESS, Freeland MI , Just bought a 72 Jimmy!!!!!!!!!!!

04-30-2002, 05:35 PM	#3
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	I have some photos on my web page of a gas tank that I got from a 62 suburban. Was a bolt in job after removing the spare tire crossmember. Still have not started the project of running the filler over and up into the rear stake pocket and out the tilting taillight. I know a couple of guys are waiting for me to do this, May is the month I will get it done, Danit!!! ------------------ John Fabris john.fabris@autodesk.com 1967 C10 SWB FleetSide Web Page 1971 K5 Blazer 2WD (basket case, but give me two year or so.) __________________ John Fabris 67 C10 SWB

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-30-2002, 06:05 PM	#4
50272 Registered User Join Date: Apr 2002 Location: Waverly ,Tn Posts: 27	the fitting of the gas tank is not what I need.I am wanting to run the fill neck behind the running light on the drivers side bed. Sorry I should have been more clear on this. I saw some pictures on here I think on how a guy did it with s-10 filler neck. Any help on this would be appreciated

04-30-2002, 06:13 PM	#5
CARS4567 Registered User Join Date: Jan 2002 Location: SEATTLE, WA Posts: 338	GO TO WES'S BOARD AT CLASSIC HEARTBEAT-

04-30-2002, 06:14 PM	#6
50272 Registered User Join Date: Apr 2002 Location: Waverly ,Tn Posts: 27	Thanks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.