Saved from the crusher - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 08-09-2007, 07:20 AM

It`s not all getting crushed,thanks to some eager beavers...

krue · 08-09-2007, 07:28 AM

Spray-Bomb · 08-09-2007, 08:26 AM

Sweet

jb4short · 08-09-2007, 08:58 AM

Tim- that guy had a relatively decent cab that he had MARKED DOWN to 1,700.00 from 2,200.00 (the yellow/white one in pic 3)

**special-K** · 08-09-2007, 09:28 AM

Yeah,I saw and thought,WTF?But,then it is complete with good doors and not stripped to just the sheetmetal.It sold and it was prolly more like $1,500.There`s a guy in the spring that brings stuff east and gets $1,500 for gutted cabs that aren`t always dent free.
I bought a pair of short Fleetsides for $500.The one was stripped to bare throughout and didn`t have a speck of rust(1st pic).The other was untouched original paint and no rust(med.olive/white bottom one in the 2nd pic.I got both wheel houses,too,from the same bed.
He`s a Ford guy and we were talking about if the new cabs were made,what they would cost.Now,this is your area of expertise.What would you gander?There are cabs made for the`50s Effies and they`re about $6Gs,right?Whatcha think?Will the day come?

72highlander · 08-09-2007, 09:43 AM

hey tim, who is this guy, and did he have another short fleet passenger bedside?

dan42 · 08-09-2007, 10:00 AM

Just a note - Brothers has the '47-'54 cabs for around 9 grand -

**special-K** · 08-09-2007, 10:46 AM

There ya go.Shewee!!Yeah Frank,another pair(black in pics).He`s from back here in the western tip of Maryland and he runs out west.

jb4short · 08-09-2007, 11:31 AM

seems like the cab could be done for about 4K IF all the components were also sold once the tools were developed- that's the ONLY way you'd ever sell enough to ammortize that many unique toolings. You also would almost have to build them to order with two different firewalls, different humps, different dashes, etc. When Dynacorn came out with the early model a lot of people started asking about the '67-'72; but there's a lot involved in making a decision to pursue it; for people in some parts of the country just the shipping cost is greater than a used cab locally.

**special-K** · 08-09-2007, 11:38 AM

Yeah,I figure we`ll see complete cabs when someone persues offering a new-built truck.

08-09-2007, 07:20 AM	#1
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Saved from the crusher It`s not all getting crushed,thanks to some eager beavers... __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-09-2007, 07:28 AM	#2
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: Saved from the crusher __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

08-09-2007, 08:26 AM	#3
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Saved from the crusher Sweet __________________ Just not low enough... ----------------------------- Sinister Killer

08-09-2007, 08:58 AM	#4
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: Saved from the crusher Tim- that guy had a relatively decent cab that he had MARKED DOWN to 1,700.00 from 2,200.00 (the yellow/white one in pic 3) Last edited by jb4short; 08-09-2007 at 08:59 AM.

08-09-2007, 09:28 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Saved from the crusher Yeah,I saw and thought,WTF?But,then it is complete with good doors and not stripped to just the sheetmetal.It sold and it was prolly more like $1,500.There`s a guy in the spring that brings stuff east and gets $1,500 for gutted cabs that aren`t always dent free. I bought a pair of short Fleetsides for $500.The one was stripped to bare throughout and didn`t have a speck of rust(1st pic).The other was untouched original paint and no rust(med.olive/white bottom one in the 2nd pic.I got both wheel houses,too,from the same bed. He`s a Ford guy and we were talking about if the new cabs were made,what they would cost.Now,this is your area of expertise.What would you gander?There are cabs made for the`50s Effies and they`re about $6Gs,right?Whatcha think?Will the day come? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 08-09-2007 at 09:30 AM.

08-09-2007, 09:43 AM	#6
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: Saved from the crusher hey tim, who is this guy, and did he have another short fleet passenger bedside? __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6

08-09-2007, 10:00 AM	#7
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: Saved from the crusher Just a note - Brothers has the '47-'54 cabs for around 9 grand - __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

08-09-2007, 10:46 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Saved from the crusher There ya go.Shewee!!Yeah Frank,another pair(black in pics).He`s from back here in the western tip of Maryland and he runs out west. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-09-2007, 11:31 AM	#9
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: Saved from the crusher seems like the cab could be done for about 4K IF all the components were also sold once the tools were developed- that's the ONLY way you'd ever sell enough to ammortize that many unique toolings. You also would almost have to build them to order with two different firewalls, different humps, different dashes, etc. When Dynacorn came out with the early model a lot of people started asking about the '67-'72; but there's a lot involved in making a decision to pursue it; for people in some parts of the country just the shipping cost is greater than a used cab locally.

08-09-2007, 11:38 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Saved from the crusher Yeah,I figure we`ll see complete cabs when someone persues offering a new-built truck. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.