![]() |
![]() |
#1 |
Registered User
Join Date: Nov 2001
Location: Fairmont WV
Posts: 304
|
Removing whole bed
Ok, here is the question. I want to tear my bed down to the frame and redo it all. If I do this and in a couple of years I want to remove the whole bed so I can start behind the cab, how hard is it to remove the whole bed? Can 4 guys lift it or would I have to lift onto blocks?
__________________
Rod Childers '71 C10 Stepside |
![]() |
![]() |
![]() |
#2 |
Post Whore
![]() Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,684
|
No problem for 4 guys.
__________________
1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: May 2000
Location: Flin Flon, Manitoba, Canada
Posts: 8,855
|
Yeah it's no problem. Actaully, my wife and I lifted the wood fleetside bed off the 72 (she's one tough chick). The worst part was getting it over the tires. But with 4 guys, you shouldn't have that problem.
__________________
My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795 |
![]() |
![]() |
![]() |
#4 |
Gotta Startem Early
Join Date: Oct 2001
Location: Amarillo, TX, USA
Posts: 364
|
I removed all the wood first, since I was not planning on reusing it any way, I did not worry about how it was removed. Once all the wood was removed it only took 2 guys to remove the bed. Do not forget to disconnect the tie down rods bewteen the fenders and the frame. I forgot 2 of them and they bent my fenders slightly before we noticed them.
__________________
67 SWB In Progress, one piece at a time, maybe 3 years I will be finished |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jan 2002
Location: Sahuarita, AZ USA
Posts: 2,033
|
Dubie, you think your wife is tough? I had mine help me load a car front seat into my pickup. It was for a 2 door, and the back flipped forward. When it flipped back, it caught her thumb. When she pulled back, it REMOVED her thumb nail! She still moved it over to the truck. It's been a little harder to get her help lately, though. Oh, and her manicurist still charged her full price the whole time it was growing back.
__________________
Bill - Tucson, AZ 47 Chevrolet 2 dr sedan 56 Chevrolet 210 2 dr sedan 66 Chevrolet Malibu 2 dr 4 speed 71 Chevrolet C30 Longhorn 86 Chevrolet Monte Carlo SS (Sold) 01 Chevrolet Tahoe IM - BUSTERWIVE@aol.com |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: May 2000
Location: Victoria, BC, Canada
Posts: 2,410
|
I managed to move mine back to get at the cab corners with the help of a friend. Its a little more difficult for short people, he had to stand on a wooden block to get enough height to clear the wheels, lol.
__________________
1970 GMC 1500 Custom Original 350/TH350 Victoria, BC, Canada You can wish in one hand and crap in the other. See which one gets filled first. |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: May 2000
Location: Flin Flon, Manitoba, Canada
Posts: 8,855
|
OH YEAH!!! well my wife could beat up your wife. LMAO just Kidding buds.
No matter how many times my wife gets hurt, she still keeps coming back for more. Once in a while, she is the one that suggests we go work on the truck. Southpa, how short/tall are you? You look tall in all your pics
__________________
My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795 |
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: Apr 2000
Location: Orlando, FL
Posts: 1,076
|
I used two slings and a engine hoist and was able to remove mine alone. Remember to check everything under the bed before lifting. One of the previous owners had welded a muffler hanger onto the underside of the front of my bed. I starting to lift and noticed it without any damage but just check everything carefully before removing.
__________________
............................................................ 68 Chevy CST SWB w/LS1, carb & 700r4. Golden Anniversary clone with a few improvements. |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: May 2000
Location: Victoria, BC, Canada
Posts: 2,410
|
I'm the world's tallest midget and/or the world's shortest giant, Dubie. 6' on the nose. The easiest way to lift a box is to get my arms under the wheel arch and just stand up, its a back thing.
My friend is about 5'5" so his side is angled down and can't get the forward part of the bedside over the wheel.
__________________
1970 GMC 1500 Custom Original 350/TH350 Victoria, BC, Canada You can wish in one hand and crap in the other. See which one gets filled first. |
![]() |
![]() |
![]() |
#10 |
"Ochre Ogre"
Join Date: Apr 2000
Location: Springfield, MN
Posts: 3,558
|
I just did it this weekend. I used my engine hoist and a 4x4 post that I cut to 71" long. I put it under the lip of the box just in front of the middle stake pockets. A small piece of chain around the post and it was off. My wife kept it balanced and watched for problems as I rolled the truck out from under it. I wouldn't do it any other way. It was effortless and used a lot less beer than the 3 buddies method.
__________________
Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087 |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Apr 2002
Location: Center Point, IA
Posts: 502
|
Jack it up.
Remove the rear wheels. Put jackstands under the rear axle housings. Buy beer and invite strong friends. Piece of cake. ![]() |
![]() |
![]() |
![]() |
#12 |
chevelito
Join Date: Jun 2001
Location: Honolulu, HI USA
Posts: 1,609
|
we took mine off even without taking off the wheels. Took 3 guys to carry.
jay
__________________
New deadline...when my son can drive. ![]() Aloha from Honolulu, HI |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|