HUGE, but possibly cool project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CG · 08-29-2007, 10:01 AM

Im cleaning house now that Im going to be down to only two trucks.

Ive been slowly getting parts together to build a 68 3/4 ton 4x4 50th. Please dont ask to be put in line for a particular part if I ever decide to sell it separately. That decision wont be made for awhile

Here is what I have so far.

1968 3/4 ton 4x4 50th matching frame, vins, build sheet and title in my name.
Three boxes, one with wood floor and tool box door.
Two tail gates, both decent and fixable.
I have matching front and rear out of a 72 3/4 ton 4x4...gives you disk brakes
A 71 turbo 350 and matching trans case.
Decent cab, but I think its a 69 or 70
Four doors
Complete 68 front clip, nice shape...I believe its rust free
One set of nice buddy buckets
Air dash cut across the slots
There is also a bunch of misc stuff I will toss in

My plans were to build an updated 50th anniversary truck but since I just acquired a nice 71 I wont be needing any of this.

If you have a serious interest in this stuff please arrange with me to come out and take a look at it. That will work much better than me posting a ton of pics online. I do have a couple of extra engines if you need one, but that would be worked out separately.

Remember this is not put together at all, its just stuff Ive been collecting.

$2000.00

Mark

**jerry moss** · 08-29-2007, 11:22 AM

sounds like a hell of a deal for someone, ttt for you.

CG · 08-29-2007, 09:47 PM

LOL...not even a sniff. Im pretty sure there is easily over 2 grand worth of parts.
The swap meet is coming soon anyway. Looks like Im going to have a trailer full of good stuff.

69RAT · 08-30-2007, 09:27 PM

sent you a pm

qksilver · 08-30-2007, 10:43 PM

are you teasing me?

CG · 08-31-2007, 01:24 AM

LOL...come and get it qksilver...

69RAT Im not sure, let me take a look and back to you this weekend on your question.

08-29-2007, 10:01 AM	#1
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,992	HUGE, but possibly cool project Im cleaning house now that Im going to be down to only two trucks. Ive been slowly getting parts together to build a 68 3/4 ton 4x4 50th. Please dont ask to be put in line for a particular part if I ever decide to sell it separately. That decision wont be made for awhile Here is what I have so far. 1968 3/4 ton 4x4 50th matching frame, vins, build sheet and title in my name. Three boxes, one with wood floor and tool box door. Two tail gates, both decent and fixable. I have matching front and rear out of a 72 3/4 ton 4x4...gives you disk brakes A 71 turbo 350 and matching trans case. Decent cab, but I think its a 69 or 70 Four doors Complete 68 front clip, nice shape...I believe its rust free One set of nice buddy buckets Air dash cut across the slots There is also a bunch of misc stuff I will toss in My plans were to build an updated 50th anniversary truck but since I just acquired a nice 71 I wont be needing any of this. If you have a serious interest in this stuff please arrange with me to come out and take a look at it. That will work much better than me posting a ton of pics online. I do have a couple of extra engines if you need one, but that would be worked out separately. Remember this is not put together at all, its just stuff Ive been collecting. $2000.00 Mark Last edited by CG; 08-29-2007 at 10:05 AM.

08-29-2007, 11:22 AM	#2
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,915	Re: HUGE, but possibly cool project sounds like a hell of a deal for someone, ttt for you. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

08-29-2007, 09:47 PM	#3
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,992	Re: HUGE, but possibly cool project LOL...not even a sniff. Im pretty sure there is easily over 2 grand worth of parts. The swap meet is coming soon anyway. Looks like Im going to have a trailer full of good stuff.

08-30-2007, 09:27 PM	#4
69RAT Registered User Join Date: Apr 2006 Location: hopeless in Washington Posts: 105	Re: HUGE, but possibly cool project sent you a pm __________________ '69 Chevy CST#'s 396/TH400, A/C

08-30-2007, 10:43 PM	#5
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: HUGE, but possibly cool project are you teasing me?

08-31-2007, 01:24 AM	#6
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,992	Re: HUGE, but possibly cool project LOL...come and get it qksilver... 69RAT Im not sure, let me take a look and back to you this weekend on your question. Last edited by CG; 08-31-2007 at 01:25 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.