|
08-30-2007, 10:12 PM
|
#1 |
|
Registered User
Join Date: May 2007
Location: Erie pa.
Posts: 57
|
292 top p/s bolt hole
Went to bolt on my new 292 power steering bracket to the top of the head and the bolt hole isn't threaded, i can't tell if it was never theaded from the factory or if it was drilled out. if I rethread it it will be a 9/16th bolt because of the diameter of the hole. anybody out there in 292 land run into this? thanks for any input.
__________________
65 tripower conv 4spd gto, 66gto, 67 gto 65 lemans conv 4spd 69 firebird conv. 67 c20 4x4 |
|
|
|
08-31-2007, 01:15 PM
|
#2 |
|
Registered User
Join Date: Dec 1999
Location: Northwest NJ
Posts: 746
|
Re: 292 top p/s bolt hole
Mine was threaded from the factory.It's 3/8" coarse thread. Chris
|
|
|
|
|
08-31-2007, 02:25 PM
|
#3 |
|
Registered User
Join Date: May 2007
Location: Erie pa.
Posts: 57
|
Re: 292 top p/s bolt hole
Thanks, I will get the tap set out.
__________________
65 tripower conv 4spd gto, 66gto, 67 gto 65 lemans conv 4spd 69 firebird conv. 67 c20 4x4 Last edited by goldengoat2; 08-31-2007 at 02:25 PM. |
|
|
|
|
08-31-2007, 05:23 PM
|
#4 |
|
member #16
 
Join Date: Dec 1999
Location: Yuba City Ca.
Posts: 3,618
|
Re: 292 top p/s bolt hole
Is the hole to big for a 3/8 helicoil?
__________________
john http://67-72chevytrucks.com/vboard/showgroups.php board vendors  http://www.flickr.com/photos/1745471...7602865984234/ |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
