some parts sale

[Fast68Chevy]

- 250 engine mount frame trees pairs
- pass side 292 tree(driver side is same as 250)
- L-6 cyl engine bock mount brackets pairs
- SBC V-8 frame trees pairs
- other 6 cyl engine parts also
- '55-68(-'72 truck) V-8 short pump pullies stuff
-oil pans

- '64-72 various leaf and coil rear truck chassis/frame parts and disc and drum related parts
- 5 lug 12 bolt axle shaft pairs
- good dana 60 3/4 ton axle for parts or whole, 4.56 and powrlok, 30 spline
- long water pump a/c brackets set for 454, etc.
- V-8 HEI distributor
- 69-72 guages dash, no bezel
- 67 CST dash knobs
- assorted 68-72 CST dash knobs
- NOS 292 emblem with GM box
-1971 Chevrolet dealer communication inventory cleanup/sales kit with box, stil in pretty good shape, alot of goodies including films and some 45-records and some pamphlets and so forth
- big 1979 Honda CM/CB400 motorcycle service book with original large three ring binder and wiring diagrams, etc
- big block front springs
- std front springs
- front control arms for disc brake trucks, some for 71-72 and others for 73-up
- front control arms for drum brake trucks
- '64-87 engine cradles
- pair of 5 lug 15" GM older painted wagons
- pair of 6 lug 15" GM older painted wagons(both pairs accept the GM truck rally wheel caps and screws)
- matched set of four older small nosed truck rally wheel caps
- 4x4 203/th350/dana 44 frotnt driveshafts
- clutch linkage parts of all kinds including frame mounted idler pivot bracket and block mounted idler ball pivot brackets, some for L-6 and some for SBC, no pedal assemblies right now though.
- '73-up 454 frame trees pair( about 1" shorter than others)
- 72 4x4 blazer rear driveshaft

thatll work for now, if are interested in aything thne lemmew know and i can give details that you may want to know

thanks

[frisky68]

I'm looking for a set for my 69 SWB step

[Michael A. K. G]

Originally posted by Fast68Chevy

- other 6 cyl engine parts also

I discovered that Nova air filter housings don't work on our trucks. At least not if you have power brakes.

Do you have an unmodified air filter housing for a 250 with power brakes? That's the offset type.

[llama]

hey randy, i do need the cross member that goes right behind the cab and the shock mount brackets for the rear. also a 454 oil pan. still working on the box jeff

[Fast68Chevy]

Originally posted by frisky68
I'm looking for a set for my 69 SWB step

sorry, dont have anymore of them right now :S

thans

[Fast68Chevy]

Originally posted by Michael A. K. G


I discovered that Nova air filter housings don't work on our trucks. At least not if you have power brakes.

Do you have an unmodified air filter housing for a 250 with power brakes? That's the offset type.

Mike, no, i did have one but got tired of tripping on it so i scrapped it, i may have a 10" or so diameter factory '68 250 straight install cleaner assembly, but thats about it right now, sorry :S

[Fast68Chevy]

addd few more items 11:04 pm 10/02/02:


-69-up 4x4 p/s box, $60 and some mail.

'71-up dana 44 front with 3.07 and also all steering linkages and related parts and sway bar and all... $125 for axle and $75 for sway bar setup and $80 for leaves packs with load leveler leaves intact

-5 lug 12 bolt axle shafts pair $30
-drums $15 pair
-12 bolt 3.07 posi carrier, '75 or so- '81 unit $75
-12 bolt 3.07 gear set $25
-flywheels and flexplates, 25 and 15
-tall tranny tunnel pan for 67-72 2wd 4 speed $25
-various driveshafts one and two piece- $25 each,
- manual trans flywheel inspection cover sets, $20 each set, for 72 and older trucks
- various kickdown cables and dipstick tubes, $5
-73-80 complete cab wiring harness for auto trans and a/c trucks $35

-85 burb receiver hitch $23
-73-87 pickup real heavy reciever hitch $28
-manual trans cast iron thre bolt nosed starters, $15 each
-SM318 tranny, $20
-newer replacement 6 cyl manifolds and head, etc
-some 73-87 windshields $25 each
-'64-'72 40" spring pack centers- 12 bolt truck rear posi axle housing, minus brake backing plates, $15

entire front third of a '73-87 rolling big block 3/4 ton 2wd chevy truck chassis in good shape, good for converting to disc brakes on 64-70 trucks, $50 or part out for BB springs and cradle and all control arms and spindles and rotors and so forth,

spindles and arms and rotors can be mailed, i have extra rotors and shields also.,

also have a nice 2wd p/s gear box $40 plus mail,. wil remove andmail the sector shaft for use on 4x4 crossover conversion if you want., $30 plus the ride

74 tilt column in super excellent clean shape, $50 plus ride, steering wheel in same nice shape, $30 plus ride,.

pair of 56" 8-leaf spring packs $45 plus ride, also U bolts and related too

pair of '64-72 cast iron rear axle tube U bolt leaf clamps $20 and ride, other related parts too including leaf packs and original overload packs and such.

72 1/2 ton 2wd front disc brake entire assembly, parts or whole, good for converting 64-70 trucks to disc brakes.,

manual steering box for most all '68-older 4x4 and all 2wd '64-87 $25 and ride

pair of optional 5 lug GM painted wagons, and pair of optional 6 lug GM painted wagons, both pairs accept GM truck rally caps and are 15" $25 a pair

set of four 73-75 small nose truck rally wheel caps, screws on outside, these arent the common '76-86 rally caps you see around, but are very close to same. $40/all four

more to add as i stumble across it....
thanks

[Fast68Chevy]

Originally posted by llama
hey randy, i do need the cross member that goes right behind the cab and the shock mount brackets for the rear. also a 454 oil pan. still working on the box jeff

Jeff-
xmember and shock mounts for what year and what rear supension and for 2wd or 4x4 ?
i have shock mount brackets for lower of coil rears and upper ones for leaf rear 64-72's

454 oil pan, hmm, dunno about that one, depends on if i part the 454 engine out, hate to though, its a rebuilt low miles one.,,,,
no biggie on the bed, only one other person is interested in it if you arent, its up to you...

thanks

[llama]

sent you a pm

[Fast68Chevy]

Jeff, ok, got one sent back at ya

thanks

[llama]

sent pm

[my67c20]

How much for the HEI distributor and wiper arms

[jjk3]

How much for the 72 1/2 ton 2wd front disc brake entire assembly? Also, does the manual steering box for '68-older need to be rebuilt?

bigchevy66@hotmail.com

[Fast68Chevy]

Originally posted by my67c20
How much for the HEI distributor and wiper arms

45 and mail ?? you mean actual arms assemblies for the blades or the arms under the cowl panel ?

thanks

[Fast68Chevy]

Originally posted by jjk3
How much for the 72 1/2 ton 2wd front disc brake entire assembly? Also, does the manual steering box for '68-older need to be rebuilt?

bigchevy66@hotmail.com

ive got a couple different boxes, both seem to be tight no slop,
35 for front entire assembly with cradle and all(cut frame rails behind shocks) ?

[TODDS 72]

RANDY
PRICE ON 6 CYL. MANIFOLDS??
THANKS TODD.

[Fast68Chevy]

sent ya PM
thanks Todd

[chevynut]

Do you still have the Dana 60 rear with coil springs?
Is it a full floater?
Are the axles held on by bolts or studs with nuts?

I am need of a 30 spline axle held on by stud/nuts and can't find one around here.

Let me know

thanks, Mike

[my67c20]

Sorry already got one have to pass.

[mikeoj]

Welcome Back !

[Wootdog]

been awhile Bubba. Wootdog

[67_SS396]

Take a look at the dates. Fast (randy) isn't back.

[Wootdog]

Wish he was. He is well versed in this hobby, and or obsession. Wootdog