Tying up loose ends... Help please. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rc 415 · 09-14-2007, 04:40 PM

I'm trying to tie up all the loose ends in the engine compartment of my truck, and boy I sure could use some help, here are pictures of what I need help with:
This wire harness has nothing to plug into,

that harness is connected to this thing, whats it for?

No wire plugging into this harness...

This wire has nothing to plug into...

Is there supposed to be a hose plugging into this?

This wiring harness melted, dont want any fires so gotta replace it, there sems to be a diode type thing at the harness, where cant I get a new harness with that?

Just a side shot... can you find any other loose ends? haha

Thanks for any ideas

Mr79C10 · 09-14-2007, 05:56 PM

The second to last Im thinking for your A/C clutch switch. Does your A/C werk at all?

Rc 415 · 09-14-2007, 06:16 PM

Quote:

Originally Posted by Mr79C10

The second to last Im thinking for your A/C clutch switch. Does your A/C werk at all?

yeah it does, but i dont want it to catch fire or anything so i gotta replace that

beaterC10 · 09-15-2007, 09:16 AM

Pic #2 is the idle solenoid for the AC. It bumps the idle up when the AC is on.
Pic #5 no conncection required. That is the vaccum pull-of for the carb secondarys.

Rc 415 · 09-29-2007, 09:04 PM

bump

09-14-2007, 04:40 PM	#1
Rc 415 Flat Black, & Chrome! Join Date: Jan 2007 Location: San Francisco Posts: 852	Tying up loose ends... Help please. I'm trying to tie up all the loose ends in the engine compartment of my truck, and boy I sure could use some help, here are pictures of what I need help with: This wire harness has nothing to plug into, that harness is connected to this thing, whats it for? No wire plugging into this harness... This wire has nothing to plug into... Is there supposed to be a hose plugging into this? This wiring harness melted, dont want any fires so gotta replace it, there sems to be a diode type thing at the harness, where cant I get a new harness with that? Just a side shot... can you find any other loose ends? haha Thanks for any ideas __________________ 1983 Chevy C10 Stepside Sold http://s69.photobucket.com/albums/i76/rc_415/

09-15-2007, 09:16 AM	#4
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	Re: Tying up loose ends... Help please. Pic #2 is the idle solenoid for the AC. It bumps the idle up when the AC is on. Pic #5 no conncection required. That is the vaccum pull-of for the carb secondarys.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-14-2007, 05:56 PM	#2
Mr79C10 It Is What It Is,,,, Join Date: Aug 2006 Location: The Gun Shine StateFlorida* Posts: 1,765	Re: Tying up loose ends... Help please. The second to last Im thinking for your A/C clutch switch. Does your A/C werk at all? __________________ 79 C10 Short Box ST8 6 bang'r Lowered w/ 3" Control arms, 2" Lower Coils and 4" shackles and hangers W/ FLIP KIT __--__* 79 C-10 project* .........................__ ..............._____ l __\___ ..............\|_(O)_ \|___(O) ] FAQ INDEX Thread The Kulture My Rat Den

09-29-2007, 09:04 PM	#5
Rc 415 Flat Black, & Chrome! Join Date: Jan 2007 Location: San Francisco Posts: 852	Re: Tying up loose ends... Help please. bump __________________ 1983 Chevy C10 Stepside Sold http://s69.photobucket.com/albums/i76/rc_415/



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.