column wiring question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

acl · 09-24-2007, 03:12 PM

I am adding a 71 factory tilt to my 68. What does the single gray wire(not part of the Half moon plug set) go to ? It comes out of the column with all the others but does not go to the plug.
Thanks
Gary

70GMCer · 09-24-2007, 03:46 PM

That is for the shifter indicator light on top the column.....

Putter · 09-24-2007, 03:47 PM

Agree. If memory serves me, there is a spade on the fuse block where that will plug up, and dim with the dash lights.

**john** · 09-24-2007, 06:18 PM

Quote:

Originally Posted by Putter

Agree. If memory serves me, there is a spade on the fuse block where that will plug up, and dim with the dash lights.

Correct. there is a spade terminal by the cluster feed fuse.

09-24-2007, 03:12 PM	#1
acl Registered User Join Date: May 2007 Location: Emporia, kansas Posts: 300	column wiring question I am adding a 71 factory tilt to my 68. What does the single gray wire(not part of the Half moon plug set) go to ? It comes out of the column with all the others but does not go to the plug. Thanks Gary

09-24-2007, 03:46 PM	#2
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: column wiring question That is for the shifter indicator light on top the column..... __________________ 1997 GMC Sierra Ext 1965 Mustang

09-24-2007, 03:47 PM	#3
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: column wiring question Agree. If memory serves me, there is a spade on the fuse block where that will plug up, and dim with the dash lights. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.