quadrajet intake manifold - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMCBubba · 09-29-2007, 10:15 PM

Is the stock manifold the best one for the quadrajet or do aftermarket ones work the same or better? thanks

BCOWANWHEELS · 09-29-2007, 10:39 PM

stock is best for all around use and even up to 350 hp

RyanG · 09-29-2007, 10:39 PM

I have an edelbrok intake and just removed the q-jet from mine. I think it should work with an aftermarket one. I m not 100% sure though.

**Stocker** · 09-30-2007, 12:22 AM

When my stock cast iron intake cracked, I replaced it with an Edelbrock 2101. No noticable difference...

lbpd719 · 09-30-2007, 01:25 AM

has to do more with how you tune the carb's and which you are better at tuning personally. Some people are better with Holleys, some are better with the quadrajets.

I tend to think just with how long the quadrajet lived in the GM corp, there must be some good things about it =). Once you get the hang of them, they can be fun. My only advice would be electric choke, no matter what you end up going with..

skokie · 09-30-2007, 01:49 AM

I had a stock iron on my and replaced it with a Edelbrock 2101. Worked just fine with my qjet.

Sport/Truck · 09-30-2007, 09:01 AM

I've got a Edelbrock performer air gap 2601. it works with square & spread bores.
http://store.summitracing.com/partde...1&autoview=sku
s/t

09-29-2007, 10:15 PM	#1
GMCBubba Registered User Join Date: Oct 2006 Location: Simpsonville, SC Posts: 255	quadrajet intake manifold Is the stock manifold the best one for the quadrajet or do aftermarket ones work the same or better? thanks __________________ 1969 GMC 3/4 ton, 307, 4-speed NP435GL, DANA 60, 4.10, HD rear leafs, manual everything, leaking oil and water. Now rocking 383, NV4500, power steering, power brakes. Finally undergoing restoration.

09-29-2007, 10:39 PM	#2
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: quadrajet intake manifold stock is best for all around use and even up to 350 hp __________________ I BELIEVE IN JOHN 3:16

09-29-2007, 10:39 PM	#3
RyanG Registered User Join Date: Feb 2006 Location: Gilbert, Az Posts: 180	Re: quadrajet intake manifold I have an edelbrok intake and just removed the q-jet from mine. I think it should work with an aftermarket one. I m not 100% sure though.

09-30-2007, 12:22 AM	#4
Stocker 20' Daredevil (Ret) Join Date: May 2003 Location: Jefferson State Posts: 13,594	Re: quadrajet intake manifold When my stock cast iron intake cracked, I replaced it with an Edelbrock 2101. No noticable difference... __________________ - Mike - 1972 K20 LWB 350/350/205 RIP El Jay

09-30-2007, 01:25 AM	#5
lbpd719 Zappaphile! Join Date: Apr 2007 Location: Los Banos, California Posts: 228	Re: quadrajet intake manifold has to do more with how you tune the carb's and which you are better at tuning personally. Some people are better with Holleys, some are better with the quadrajets. I tend to think just with how long the quadrajet lived in the GM corp, there must be some good things about it =). Once you get the hang of them, they can be fun. My only advice would be electric choke, no matter what you end up going with.. __________________ 1969 C20 LWB Camper Special - The Beater.. 1998 Cheyenne V6 - 4/6 Drop - For The Son

09-30-2007, 01:49 AM	#6
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,334	Re: quadrajet intake manifold I had a stock iron on my and replaced it with a Edelbrock 2101. Worked just fine with my qjet. __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

09-30-2007, 09:01 AM	#7
Sport/Truck Sierra Grande Club Join Date: Jan 2007 Location: New Mexico USA Posts: 2,433	Re: quadrajet intake manifold I've got a Edelbrock performer air gap 2601. it works with square & spread bores. http://store.summitracing.com/partde...1&autoview=sku s/t __________________ 1971 GMC Sierra Grande, 1/2 ton short wide, original 4 bolt 010 020 block & heads. (matching #'s). 383 stroker, SMI q jet 750 cfm, Lunati Voodoo 60102 cam, Scorpion roller rockers, Spin Tech pro street mufflers with X pipe.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.