I need help locating an o-ring gasket - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Zumo · 09-29-2007, 11:43 PM

I need to know what to ask for or a part number. Is it just called a Oil filter mount O-Ring Gasket? I assumed one should have come with my rebuild gasket set but I don't have one.

Sorry for the dumb question.

Thanks

lbpd719 · 09-30-2007, 01:30 AM

take it down to napa, or a marine supply house. They should be able to get you what you want (I would go to the marine/boat supply, they tend to have every imaginable gasket/o-ring)..

sdkid · 09-30-2007, 11:10 AM

Looks like an oil filter adapter for an engine that originally had a canister type filter. The last time I needed the oring, I had to get the canister type oil filter. It came with the gasket. Seems like Mr Gasket offered a 5 pack of them or something. At the time I needed it asap.

Zumo · 09-30-2007, 11:32 AM

Well I found this Oil Filter Adapter Kit at Napa's website and is liste for 12.95. I will have to go by my local Napa store today if they are open to see if they have just the ring. If not I'll order this one. I am taking it off my old block and putting it on my new one.

09-29-2007, 11:43 PM	#1
Zumo Hot Rods For Life Join Date: Sep 2001 Location: Waxahachie, TX Posts: 3,305	I need help locating an o-ring gasket I need to know what to ask for or a part number. Is it just called a Oil filter mount O-Ring Gasket? I assumed one should have come with my rebuild gasket set but I don't have one. Sorry for the dumb question. Thanks Attached Images __________________ 1968 C10 LWB **SOLD* Andy Viva Los Bicicletas! Los Muertos Custom Bicycles Last edited by Zumo; 09-29-2007 at 11:48 PM.

09-30-2007, 01:30 AM	#2
lbpd719 Zappaphile! Join Date: Apr 2007 Location: Los Banos, California Posts: 228	Re: I need help locating an o-ring gasket take it down to napa, or a marine supply house. They should be able to get you what you want (I would go to the marine/boat supply, they tend to have every imaginable gasket/o-ring).. __________________ 1969 C20 LWB Camper Special - The Beater.. 1998 Cheyenne V6 - 4/6 Drop - For The Son

09-30-2007, 11:10 AM	#3
sdkid Registered User Join Date: Sep 2004 Location: Pierre SD Posts: 1,533	Re: I need help locating an o-ring gasket Looks like an oil filter adapter for an engine that originally had a canister type filter. The last time I needed the oring, I had to get the canister type oil filter. It came with the gasket. Seems like Mr Gasket offered a 5 pack of them or something. At the time I needed it asap. __________________ I think the world needs a drink... Help somebody...If you can....VanZant We're not wrong, we're not sorry, and its probably gonna happen again. That's the truth about men. Tracy Byrd Member# 13924 '70 c10, 350/350 '68 c10 250/4spd '68 c10 no eng/trans fac ps/pb/ac/at (future father/sons project) '48 Chevy Loadmaster

09-30-2007, 11:32 AM	#4
Zumo Hot Rods For Life Join Date: Sep 2001 Location: Waxahachie, TX Posts: 3,305	Re: I need help locating an o-ring gasket Well I found this Oil Filter Adapter Kit at Napa's website and is liste for 12.95. I will have to go by my local Napa store today if they are open to see if they have just the ring. If not I'll order this one. I am taking it off my old block and putting it on my new one. __________________ 1968 C10 LWB **SOLD* Andy Viva Los Bicicletas! Los Muertos Custom Bicycles

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.