Adjusting Power Steering? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

aventur1 · 10-02-2007, 09:19 AM

1971....
The power steering seems to easy? Is there a way to adjust? To make it more tighter, theres no slop in turning, the gear box was just rebuilt. Can I adjust it at the gear box? Also am putting a smaller steering wheel on.

sneakysnake · 10-02-2007, 09:31 AM

Not to my knowledge. There is a valve in the box that controls that, may take it back to your rebuilder. Could just take the belt off the power steering pump, that will toughen things up.LOL

ERASER5 · 10-02-2007, 10:10 AM

Add a steering shock to your drag link just like the 4X4 guys do. That will stiffen thing up a bit as well as absorb some of the road bumps.

66skylarkpost · 10-02-2007, 10:15 AM

Quote:

Originally Posted by sneakysnake

Not to my knowledge. There is a valve in the box that controls that, may take it back to your rebuilder.

theres a valve in the back of the pump, its the large fitting , where you attach the pressure line . unscrew it and try a few valves from smaller cars ( as in a camaro or chevelle or nova )it may slow it down .

aventur1 · 10-02-2007, 11:38 AM

Thanks for some replys!!!
Removing the belt is a good one, LOL

66skylarkpost · 10-02-2007, 11:45 AM

i'd just add that smaller wheel and see how you like it . if you ever put wider tires on the front ,it may be just fine .

aventur1 · 10-02-2007, 12:34 PM

Smaller steering wheel, I did think that that would help. Here's the steering wheel I'll put on, just don't know about the horn button? It was not the the wheel.

10-02-2007, 09:19 AM	#1
aventur1 Registered User Join Date: Aug 2007 Location: Boise, Idaho Posts: 676	Adjusting Power Steering? 1971.... The power steering seems to easy? Is there a way to adjust? To make it more tighter, theres no slop in turning, the gear box was just rebuilt. Can I adjust it at the gear box? Also am putting a smaller steering wheel on.

10-02-2007, 09:31 AM	#2
sneakysnake It's a catastrophic success. Join Date: Jan 2003 Location: Oklahoma Posts: 2,077	Re: Adjusting Power Steering? Not to my knowledge. There is a valve in the box that controls that, may take it back to your rebuilder. Could just take the belt off the power steering pump, that will toughen things up.LOL

10-02-2007, 10:10 AM	#3
ERASER5 Registered User Join Date: Jun 2006 Location: Indiana Posts: 4,859	Re: Adjusting Power Steering? Add a steering shock to your drag link just like the 4X4 guys do. That will stiffen thing up a bit as well as absorb some of the road bumps. __________________ '70 GMC C1500 LWB Power disc brakes. WooHoo! Posi 6 Lug Dana 60

10-02-2007, 11:38 AM	#5
aventur1 Registered User Join Date: Aug 2007 Location: Boise, Idaho Posts: 676	Re: Adjusting Power Steering? Thanks for some replys!!! Removing the belt is a good one, LOL

10-02-2007, 11:45 AM	#6
66skylarkpost Registered User Join Date: Mar 2006 Location: kearney,nebraska Posts: 443	Re: Adjusting Power Steering? i'd just add that smaller wheel and see how you like it . if you ever put wider tires on the front ,it may be just fine . __________________ '70 k-10 longbox- mid 70's drivetrain 350/350 487x heads 10.1:1 flowmasters ,35's 3.73's auburn posi ,rear shackle flip. '72 short stepside U.S. forestry truck, '73 455 buick,400 turbo,dropped 2"-4 1/4" ,3.07 posi,:'89 silverado 1500 ,OK truck ,5.7 holley tbi ,trick 700r4 3.07 auburn posi ,and my '66 skylark ,'73 centurion and my '84 monte carlo imca stock car

10-02-2007, 12:34 PM	#7
aventur1 Registered User Join Date: Aug 2007 Location: Boise, Idaho Posts: 676	Re: Adjusting Power Steering? Smaller steering wheel, I did think that that would help. Here's the steering wheel I'll put on, just don't know about the horn button? It was not the the wheel. Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.