Where to use seam sealer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

skokie · 10-06-2007, 11:04 PM

Where would you use seam sealer on the front of a 68? I am referring mainly to the door area, rockers, & the cowl area. Also what brand would be good to use?

Thanks

kaycee · 10-07-2007, 09:49 AM

I used it wherever there was a seam inside the cab,along the floor board to cab .I used the 3-M seam sealer.

skokie · 10-07-2007, 01:41 PM

Is this the one? http://www.levineautoparts.com/3mfasnfirsea.html

EAST SIDE LOW LIFE · 10-07-2007, 01:48 PM

I used a lick between my rear wheel wells and the side of the box where they join on the inside of the box.

esll.

bad6772 · 10-07-2007, 02:40 PM

seam sealer should be used where seams are lol , no really, always use a good primer for the sean sealer to bond too... i would defanilty not seam seal over bare metal....as far as brands there is only about 3 manifactures, but many labels, i like Kent... but have used 3m its all about the same.......hope this helps....tony one more thing some seam sealers are not flexiable.....and dry ridged, i would make shure that you use the best for your applications...............tony

10-06-2007, 11:04 PM	#1
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,342	Where to use seam sealer Where would you use seam sealer on the front of a 68? I am referring mainly to the door area, rockers, & the cowl area. Also what brand would be good to use? Thanks __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

10-07-2007, 09:49 AM	#2
kaycee Registered User Join Date: Jan 2000 Location: Wyoming USA Posts: 2,446	Re: Where to use seam sealer I used it wherever there was a seam inside the cab,along the floor board to cab .I used the 3-M seam sealer. __________________ 2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327

10-07-2007, 01:41 PM	#3
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,342	Re: Where to use seam sealer Is this the one? http://www.levineautoparts.com/3mfasnfirsea.html __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

10-07-2007, 01:48 PM	#4
EAST SIDE LOW LIFE Senior Member Join Date: Mar 2007 Location: VANCOUVER ISLAND, B.C., Canada Posts: 1,602	Re: Where to use seam sealer I used a lick between my rear wheel wells and the side of the box where they join on the inside of the box. esll. __________________ Tomorrow is for doing today's stuff. ************************************* This truck has just the right amount of energy for me! Author: Warren Lake .... (member)

10-07-2007, 02:40 PM	#5
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,955	Re: Where to use seam sealer seam sealer should be used where seams are lol , no really, always use a good primer for the sean sealer to bond too... i would defanilty not seam seal over bare metal....as far as brands there is only about 3 manifactures, but many labels, i like Kent... but have used 3m its all about the same.......hope this helps....tony one more thing some seam sealers are not flexiable.....and dry ridged, i would make shure that you use the best for your applications...............tony

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.