Parting: 68 Chevy C20 Custom Camper Special - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*FormerMember* · 10-08-2007, 02:11 PM

Not a lick of sheet metal worth saving, except maybe the grill.

292 I-6 runs, smokes on start up
4 speed, shifts well, clutch works nicely
Eaton rear with 4.10's and working big brakes
4 red striped hub caps
17" stock wheels

Manual brakes
Manual steering

What do you need from it?

Please figure on your own shipping. Estimate your own weight and box size, shipping from 03036

**too much stuff** · 10-08-2007, 03:09 PM

Any emblems that are good?

*FormerMember* · 10-08-2007, 03:30 PM

I'd say the emblems are drive quality. Certainly could use paint, very little pitting, which is surprising.

They're all there.

LooseCannon · 10-08-2007, 04:02 PM

Steering wheel?

*FormerMember* · 10-08-2007, 04:03 PM

Quote:

Originally Posted by LooseCannon

Steering wheel?

It's there but cracked.

LooseCannon · 10-08-2007, 04:19 PM

Quote:

Originally Posted by grendel

It's there but cracked.

No problem, I expect cracks on a 40 year old steering wheel.

Can you get pics of the bad spots and provide a price shipped to 17007?

*FormerMember* · 10-08-2007, 04:37 PM

Quote:

Originally Posted by LooseCannon

No problem, I expect cracks on a 40 year old steering wheel.

Can you get pics of the bad spots and provide a price shipped to 17007?

Actually, I was wrong. No cracks, just discolored.

65.00 shipped in a USPS flat rate box, if it fits.

**too much stuff** · 10-08-2007, 04:41 PM

fyi, i don't think the steering wheel will fit a flat rate box.
Pic of the emblems? How much for the emblems, e-brake cover under the steering wheel, and the radio delete? Thanks, Eric

*FormerMember* · 10-08-2007, 04:44 PM

Quote:

Originally Posted by too much stuff

fyi, i don't think the steering wheel will fit a flat rate box.
Pic of the emblems? How much for the emblems, e-brake cover under the steering wheel, and the radio delete? Thanks, Eric

I wish you had asked me for the pics before I went out and snapped that! Make an offer on those items, I'll have to figure out shipping.

**too much stuff** · 10-08-2007, 04:49 PM

It kind of depends on the condition of the emblems. If the studs are good etc... I can handle faded paint, but good studs and minor pitting would be good. $25 plus ship? Eric

*FormerMember* · 10-08-2007, 04:52 PM

Quote:

Originally Posted by too much stuff

It kind of depends on the condition of the emblems. If the studs are good etc... I can handle faded paint, but good studs and minor pitting would be good. $25 plus ship? Eric

Which emblems are you looking for?

Some of them will be a pita to pull.

edited to add pics of the emblem and hub caps.

stllookn · 10-08-2007, 05:15 PM

How much for the Custom Camper emblems? Are they pitted? Oops...I was late with this. I can't tell from the pics if those have pits in the chrome.

*FormerMember* · 10-08-2007, 05:17 PM

Quote:

Originally Posted by stllookn

How much for the Custom Camper emblems? Are they pitted?

They have a little pitting, as posted in the pic above. Not bad, if painted, I would say.

LooseCannon · 10-08-2007, 05:29 PM

Quote:

Originally Posted by grendel

Actually, I was wrong. No cracks, just discolored.

65.00 shipped in a USPS flat rate box, if it fits.

Sounds good, if the price includes the horn button. PM sent.

*FormerMember* · 10-08-2007, 05:32 PM

Quote:

Originally Posted by LooseCannon

Sounds good, if the price includes the horn button. PM sent.

Didn't receive a pm?

*FormerMember* · 10-08-2007, 05:36 PM

emblem pic was blurry, so I replaced it.

68chevylwb · 10-08-2007, 08:24 PM

hi do you have all 4 of those 3/4 ton hub caps ?? .do they all look like the picture posted ?? .price and shipping cost to 93309 zip code .
thank you roger

*FormerMember* · 10-08-2007, 08:26 PM

Quote:

Originally Posted by 68chevylwb

hi do you have all 4 of those 3/4 ton hub caps ?? .do they all look like the picture posted ?? .price and shipping cost to 93309 zip code .
thank you roger

Yes, I have all four.

You'll have a PM shortly with price inclusive of shipping.

Smittys 3600 · 10-08-2007, 09:03 PM

I would be interested in the differential (pumpkin) if it is 4.10 gearing.

Thanks

Brian

*FormerMember* · 10-08-2007, 09:04 PM

Quote:

Originally Posted by Smittys 3600

I would be interested in the differential (pumpkin) if it is 4.10 gearing.

Thanks

Brian

The whole Eaton or just the third?

Smittys 3600 · 10-08-2007, 09:08 PM

The whole member

*FormerMember* · 10-08-2007, 09:11 PM

Quote:

Originally Posted by Smittys 3600

The whole member

I am confused. Do you want the WHOLE axle assembly (axle shafts, axle housing, brakes etc... )or just the third member AKA dropout or differential.

Smittys 3600 · 10-08-2007, 09:17 PM

Just the third member. The housing and gears.

DieselEater · 10-08-2007, 09:20 PM

I'd be interested in the Bell crank (z-bar), along with everything connected to it up to clutch fork on one end, and up to clutch pedal on other end. Price quote for parts and shipping seperate please. To 81082

A general pic of the whole truck would be good for parts buyers too...

Thanks,

A.......

*FormerMember* · 10-08-2007, 09:20 PM

Quote:

Originally Posted by Smittys 3600

Just the third member. The housing and gears.

It's 4.10's although I don't know what the gears look like. I am also not sure I want to get into pulling the third member.

10-08-2007, 02:11 PM	#1
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Parting: 68 Chevy C20 Custom Camper Special Not a lick of sheet metal worth saving, except maybe the grill. 292 I-6 runs, smokes on start up 4 speed, shifts well, clutch works nicely Eaton rear with 4.10's and working big brakes 4 red striped hub caps 17" stock wheels Manual brakes Manual steering What do you need from it? Please figure on your own shipping. Estimate your own weight and box size, shipping from 03036 Last edited by FormerMember; 10-08-2007 at 09:21 PM.

10-08-2007, 03:09 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: Parting: 68 Chevy C20 Custom Camper Special Any emblems that are good? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-08-2007, 03:30 PM	#3
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Parting: 68 Chevy C20 Custom Camper Special I'd say the emblems are drive quality. Certainly could use paint, very little pitting, which is surprising. They're all there.

10-08-2007, 04:02 PM	#4
LooseCannon Registered User Join Date: Mar 2004 Location: Boiling Springs, PA Posts: 391	Re: Parting: 68 Chevy C20 Custom Camper Special Steering wheel?

10-08-2007, 04:41 PM	#8
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: Parting: 68 Chevy C20 Custom Camper Special fyi, i don't think the steering wheel will fit a flat rate box. Pic of the emblems? How much for the emblems, e-brake cover under the steering wheel, and the radio delete? Thanks, Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-08-2007, 04:49 PM	#10
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: Parting: 68 Chevy C20 Custom Camper Special It kind of depends on the condition of the emblems. If the studs are good etc... I can handle faded paint, but good studs and minor pitting would be good. $25 plus ship? Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-08-2007, 05:15 PM	#12
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: Parting: 68 Chevy C20 Custom Camper Special How much for the Custom Camper emblems? Are they pitted? Oops...I was late with this. I can't tell from the pics if those have pits in the chrome. Attached Images __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) Last edited by stllookn; 10-08-2007 at 05:17 PM.

10-08-2007, 05:36 PM	#16
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Parting: 68 Chevy C20 Custom Camper Special emblem pic was blurry, so I replaced it.

10-08-2007, 08:24 PM	#17
68chevylwb Junior Member Join Date: Sep 2004 Location: Bakersfield, CA Posts: 132	Re: Parting: 68 Chevy C20 Custom Camper Special hi do you have all 4 of those 3/4 ton hub caps ?? .do they all look like the picture posted ?? .price and shipping cost to 93309 zip code . thank you roger

10-08-2007, 09:03 PM	#19
Smittys 3600 Registered User Join Date: Sep 2007 Location: Yorkville IL Posts: 27	Re: Parting: 68 Chevy C20 Custom Camper Special I would be interested in the differential (pumpkin) if it is 4.10 gearing. Thanks Brian

10-08-2007, 09:08 PM	#21
Smittys 3600 Registered User Join Date: Sep 2007 Location: Yorkville IL Posts: 27	Re: Parting: 68 Chevy C20 Custom Camper Special The whole member

10-08-2007, 09:17 PM	#23
Smittys 3600 Registered User Join Date: Sep 2007 Location: Yorkville IL Posts: 27	Re: Parting: 68 Chevy C20 Custom Camper Special Just the third member. The housing and gears.

10-08-2007, 09:20 PM	#24
DieselEater Registered User Join Date: Dec 2006 Location: Trinidad, Colorado Posts: 642	Re: Parting: 68 Chevy C20 Custom Camper Special I'd be interested in the Bell crank (z-bar), along with everything connected to it up to clutch fork on one end, and up to clutch pedal on other end. Price quote for parts and shipping seperate please. To 81082 A general pic of the whole truck would be good for parts buyers too... Thanks, A....... __________________ 69' 3/4 4X4 470ci BBC 700 HP.... D60/14bolt 205/465 http://profile.myspace.com/index.cfm...ndid=127691959

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.