Power Steering Bracket for an Inline 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jugernot · 10-18-2007, 01:47 AM

How hard is it to get a complete power steering bracket for an inline 6? A buddy at work just bought a 72 long bed with an inline 6 and wants to put power steering on it.

rwgregory · 10-18-2007, 03:37 AM

If the motor is a 194, 230 or 250 they are around, but a little hard to find. Those engines also came in cars so there are more of them out there. If it is a 292, GOOD LUCK!! Those motors only came in 3/4 ton and up trucks and vans and power steering setups for those are rare. Start checking "big truck" junkyards for bobtails, step vans,etc.

jugernot · 10-18-2007, 05:43 PM

ttt

Brad · 10-18-2007, 08:23 PM

I just listed one on the parts board several weeks ago. Unfortunately, it's only 1 of 3 pieces needed, but perhaps you can come up with the other 2 somehow.
http://67-72chevytrucks.com/vboard/s...d.php?t=256257

msgross · 10-18-2007, 09:05 PM

I found one in a mid 70's (i think) Chevy van with a 250 at the Junkyard. Sold it on here for about $100

wibilly · 10-18-2007, 11:43 PM

are the later model 250s the same as our trucks? i have a 79 gmc with a 250 and power stearing

*ksjh1316* · 10-18-2007, 11:53 PM

The 292 was avail in half tons as well mine has one with ps and the brackets will be on the parts board in a few months as I am doing a 350 swap. Just curious what is a complete set worth?

msgross · 10-19-2007, 11:35 AM

Quote:

Originally Posted by ksjh1316

The 292 was avail in half tons as well mine has one with ps and the brackets will be on the parts board in a few months as I am doing a 350 swap. Just curious what is a complete set worth?

i've seen 292 brackets go for $200+ (higher on Ebay)

2bits · 10-19-2007, 01:54 PM

Quote:

Originally Posted by wibilly

are the later model 250s the same as our trucks? i have a 79 gmc with a 250 and power stearing

I think in 79 they were all using the integrated head and those are supposed to be different. I am using one from an integrated head on mine, which is not an integrated head, but I had to get the water pump pulley as well and move the balancer slightly because it sits 1/4 inch off, but after that it is perfect.

Ebay is the best source for these brackets. Expect to pay at LEAST $75 tho, otherwise hit the yards if you have any around your area.

jugernot · 10-21-2007, 04:42 AM

Can anyone post some pictures of the brackets so we can look for the correct ones?

OhNoJoe · 10-21-2007, 08:26 AM

I have a set for a 292 if that's what you're looking for. I'll be using them on the burb. 250 set up is different.
I'll try to get some pictures posted. BTW I paid $20 for my set-up including the pump SCORE!!

msgross · 10-21-2007, 08:27 AM

Here are the one's that I sold...

http://www.67-72chevytrucks.com/vboa...d.php?t=252137

Brad · 10-21-2007, 12:36 PM

Quote:

Originally Posted by jugernot

Can anyone post some pictures of the brackets so we can look for the correct ones?

Here's the top bracket:

2bits · 10-21-2007, 07:28 PM

Here is a pic of the bracket installed, but not the pump:

Here is a pic with the pump installed, this also shows what happens when you use a bracket from an integrated head 250.

gunner33 · 05-19-2012, 03:50 PM

I have a 69 chevelle that has the problem that is pictured on the bottom it has a head on it off of a newer engein what do I need to get the power stearing pump strate.

hugger6933 · 05-19-2012, 07:55 PM

There is a guy on E-bay that makes and sell those and a/c brackets as well. I have a 64 C60 that I'm planning on adding power steering to

**DPowers** · 05-19-2012, 09:16 PM

I still have these.
http://67-72chevytrucks.com/vboard/s...d.php?t=517527

1972RedNeck · 05-19-2012, 10:12 PM

I would use one of THESE.

ole dollor · 05-20-2012, 12:18 AM

yes davis speed shop sells inline six power steering ,alt and a/c brackets.you can find him on ebay.he makes them his self i just put one of his on my 1970 1/2 ton 292 this week, very good set up. but you will need to see what pump you are going to use, he has the setup for several . hopes this helps. the power steering bracket was 156.00 shipped. it is very well made.

**NC67Chev** · 05-20-2012, 06:56 AM

Quote:

Originally Posted by gunner33

I have a 69 chevelle that has the problem that is pictured on the bottom it has a head on it off of a newer engein what do I need to get the power stearing pump strate.

What did the set-up originally come off of? Did you use the pulley's from the donor? Is your power steering pulley out of alignment by a full groove with regards to the WP pulley? A pic would be helpful.

sambudo · 03-02-2014, 04:24 AM

Quote:

Originally Posted by NC67Chev

What did the set-up originally come off of? Did you use the pulley's from the donor? Is your power steering pulley out of alignment by a full groove with regards to the WP pulley? A pic would be helpful.

My power steering pulley is out of alignment, like you staded above. What do I need to do to correct it?

10-18-2007, 01:47 AM	#1
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Power Steering Bracket for an Inline 6 How hard is it to get a complete power steering bracket for an inline 6? A buddy at work just bought a 72 long bed with an inline 6 and wants to put power steering on it. __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082

10-18-2007, 03:37 AM	#2
rwgregory Registered User Join Date: Apr 2005 Location: Chula Vista, California Posts: 495	Re: Power Steering Bracket for an Inline 6 If the motor is a 194, 230 or 250 they are around, but a little hard to find. Those engines also came in cars so there are more of them out there. If it is a 292, GOOD LUCK!! Those motors only came in 3/4 ton and up trucks and vans and power steering setups for those are rare. Start checking "big truck" junkyards for bobtails, step vans,etc. __________________ rwgregory 67 GMC 2500 ,2w/d wide box 305 V-6, 4-speed

10-18-2007, 05:43 PM	#3
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Re: Power Steering Bracket for an Inline 6 ttt __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082

10-18-2007, 08:23 PM	#4
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,673	Re: Power Steering Bracket for an Inline 6 I just listed one on the parts board several weeks ago. Unfortunately, it's only 1 of 3 pieces needed, but perhaps you can come up with the other 2 somehow. http://67-72chevytrucks.com/vboard/s...d.php?t=256257 __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten... Last edited by Brad; 10-21-2007 at 12:41 PM.

10-18-2007, 09:05 PM	#5
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Power Steering Bracket for an Inline 6 I found one in a mid 70's (i think) Chevy van with a 250 at the Junkyard. Sold it on here for about $100 __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

10-18-2007, 11:43 PM	#6
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	Re: Power Steering Bracket for an Inline 6 are the later model 250s the same as our trucks? i have a 79 gmc with a 250 and power stearing __________________ common sense isn't so common anymore

10-18-2007, 11:53 PM	#7
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: Power Steering Bracket for an Inline 6 The 292 was avail in half tons as well mine has one with ps and the brackets will be on the parts board in a few months as I am doing a 350 swap. Just curious what is a complete set worth?

10-21-2007, 04:42 AM	#10
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Re: Power Steering Bracket for an Inline 6 Can anyone post some pictures of the brackets so we can look for the correct ones? __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082

10-21-2007, 08:26 AM	#11
OhNoJoe Registered User Join Date: May 2006 Location: Springfield Illinois Posts: 182	Re: Power Steering Bracket for an Inline 6 I have a set for a 292 if that's what you're looking for. I'll be using them on the burb. 250 set up is different. I'll try to get some pictures posted. BTW I paid $20 for my set-up including the pump SCORE!!

10-21-2007, 08:27 AM	#12
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Power Steering Bracket for an Inline 6 Here are the one's that I sold... http://www.67-72chevytrucks.com/vboa...d.php?t=252137 __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

10-21-2007, 07:28 PM	#14
2bits Registered User Join Date: Jan 2006 Location: Dallas Posts: 504	Re: Power Steering Bracket for an Inline 6 Here is a pic of the bracket installed, but not the pump: Here is a pic with the pump installed, this also shows what happens when you use a bracket from an integrated head 250. __________________ _______________ Thomas '78 Silverado '74 Monte Carlo '47 Teardrop Trailer East Texas Classics Local Club

05-19-2012, 03:50 PM	#15
gunner33 Registered User Join Date: May 2012 Location: holton ks Posts: 1	Re: Power Steering Bracket for an Inline 6 I have a 69 chevelle that has the problem that is pictured on the bottom it has a head on it off of a newer engein what do I need to get the power stearing pump strate.

05-19-2012, 07:55 PM	#16
hugger6933 Registered User Join Date: Oct 2008 Location: Marianna Arkansas Posts: 7,279	Re: Power Steering Bracket for an Inline 6 There is a guy on E-bay that makes and sell those and a/c brackets as well. I have a 64 C60 that I'm planning on adding power steering to

05-19-2012, 09:16 PM	#17
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,443	Re: Power Steering Bracket for an Inline 6 I still have these. http://67-72chevytrucks.com/vboard/s...d.php?t=517527 __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

05-20-2012, 12:18 AM	#19
ole dollor Registered User Join Date: May 2012 Location: Anton, Texas Posts: 2,364	Re: Power Steering Bracket for an Inline 6 yes davis speed shop sells inline six power steering ,alt and a/c brackets.you can find him on ebay.he makes them his self i just put one of his on my 1970 1/2 ton 292 this week, very good set up. but you will need to see what pump you are going to use, he has the setup for several . hopes this helps. the power steering bracket was 156.00 shipped. it is very well made.



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.