68 Tilt column Install - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68SHORTBOX · 10-20-2007, 02:04 AM

Got the new column preped and painted it. Made the mod for the netural safety switch. Easy mod when column is apart. The 72 column has a 36 spline shaft, are you using the center shaft from the van to attach it to the steering box

The 68 shaft is one piece all the way to the slip sleeve with no splined coupling to attached it to the column

any help here would be great.

JimKshortstep4x4 · 10-20-2007, 03:53 AM

The shaft extension for the 69 up trucks should work well for you but you will need to collapse it a bit.

Jim

**special-K** · 10-20-2007, 10:47 AM

Ditto!! You just need the rest of a later 2-pc column.Doesn`t need to be tilt.

68SHORTBOX · 10-20-2007, 03:14 PM

Thanks guys, I knew that somthing would fit but just didn't know what to look for. Thanks for the help

10-20-2007, 02:04 AM	#1
68SHORTBOX Registered User Join Date: Jul 2006 Location: El Cajon Ca Posts: 84	68 Tilt column Install Got the new column preped and painted it. Made the mod for the netural safety switch. Easy mod when column is apart. The 72 column has a 36 spline shaft, are you using the center shaft from the van to attach it to the steering box The 68 shaft is one piece all the way to the slip sleeve with no splined coupling to attached it to the column any help here would be great. Last edited by 68SHORTBOX; 10-20-2007 at 02:06 AM.

10-20-2007, 03:53 AM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: 68 Tilt column Install The shaft extension for the 69 up trucks should work well for you but you will need to collapse it a bit. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

10-20-2007, 10:47 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 68 Tilt column Install Ditto!! You just need the rest of a later 2-pc column.Doesn`t need to be tilt. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-20-2007, 03:14 PM	#4
68SHORTBOX Registered User Join Date: Jul 2006 Location: El Cajon Ca Posts: 84	Re: 68 Tilt column Install Thanks guys, I knew that somthing would fit but just didn't know what to look for. Thanks for the help

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.