Good solid project. Portland 1969gmc lwb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

redhead69 · 10-27-2007, 01:28 AM

Ive listed this before and didnt really want to get rid of it but now its gotta go.
Its a 1969 lwb gmc 2500. Has a good 350 that just needs the carb and battery hooked up then should run good. 350 tranny shifted fine. The cab needs rocker panels to be super solid. Bed floor is rusty. Original bb th400 truck and still has bb towers. Radio delete truck. Dana rear, 2 extra wheels and tires, has aux tanks. It was my parts ***** so its missing a few little things.

Anybody interested in this?? Id take 500.00 for everything or 250.00 minus motor

Wouldnt take much to get it going seems too nice to pull the motor and scrap and unfortunately thats what I am going to do if it doesnt go soon.

RicksTrucks · 10-27-2007, 04:17 AM

Could you post some pics showing both sides and front?

CG · 10-27-2007, 09:44 AM

Tempting...wanna deliver to my house?

I see a few things I could use. Give me a PM if someone doesn't pick this up from you.

Thanks, Mark

Luvlegs · 10-27-2007, 09:53 AM

If you part out, how's the steering wheel? good luck.

**PICKMUP** · 10-27-2007, 11:18 AM

Any rust on core spt? Doors (bottoms)? Other real nice parts?

redhead69 · 10-27-2007, 07:41 PM

Rickstrucks:belowthe best pics I have right now. I can do better this weekend.
Luvlegs- I wont be parting it I need the room fast.
Pickmup-The passenger side front fender, inner fender, has rust up front.. so I suspect the bottom of the core support under the battery has a spot of rust too (where the innerfender bolts up). The grill needs the passenger side trim pc replaced and would look new. Doors are good. I see your a vendor, if interested theres a list of stuff I need for my swb and other chevs that we could work in trades.. If interested I could pm you the items Im looking for.

redhead69 · 10-27-2007, 07:42 PM

**PICKMUP** · 10-27-2007, 10:23 PM

I will buy it...IF it comes with both sets of seats shown in the pics: green buckets & red bench.
It is a long trip, but I will take the time & $$$ to come right down & get it out of your way.

**Classic Bowties** · 10-27-2007, 10:53 PM

Quote:

Originally Posted by PICKMUP

I will buy it...IF it comes with both sets of seats shown in the pics: green buckets & red bench.

Good one frank

, didn't you realize this thing is less then 10 minutes away from me and would have been in my stash of goodies four or five months ago if them buckets were included in the deal. Good luck on the sale of your truck eric and if you get a chance give me a ring sometime tomorrow. Mel

**PICKMUP** · 10-27-2007, 11:59 PM

Classic Bowties-Mel,
Not sure how you got in on this deal-between the two of us-but, I don't think you are in a position to say what he has for sale...or not.

I am trying to clarify what he has offered and shown pics of. He said everything goes, so I am trying to buy.
Please don't try to get in and "kill" my offers/buying actions just because you may have wanted them, or you live closer, or you know him.
Now, let's just see if he wants to sell this, as shown...unless, you were just sending him some kind of code to sell it to you instead?
Thanks, Frank

**Classic Bowties** · 10-28-2007, 12:34 AM

Quote:

Originally Posted by PICKMUP

Classic Bowties-Mel,
Not sure how you got in on this deal-between the two of us-but, I don't think you are in a position to say what he has for sale...or not.

I am trying to clarify what he has offered and shown pics of. He said everything goes, so I am trying to buy.
Please don't try to get in and "kill" my offers/buying actions just because you may have wanted them, or you live closer, or you know him.
Now, let's just see if he wants to sell this, as shown...unless, you were just sending him some kind of code to sell it to you instead?
Thanks, Frank

Frank, ya ought'a lighten up a bit buddy, you probably still have about half of all the factory truck buckets gm ever installed in these trucks out in your storage containers out front. I am not in any way involved in any deal between the two of you and am not trying to "get in" and "kill" any offers/buying actions from anyone and most definitely am not sending him any "kind of code" to sell it to me as I already passed on the truck months ago due to the oe seats not being included/offered in the sale of the truck, I was told by him at that time that he purchased the truck for the seats. Just to clarify, I wanted to talk with him about a rearend he inquired about awhile back. Eric, sorry for all of this in your thread but once again as I stated earlier good luck on your sale! Mel/Cb

redhead69 · 10-28-2007, 12:36 AM

Sorry should have clarified when I posted the later pics for RicksTrucks, the buckets are not included with this truck... my bad

eric

**PICKMUP** · 10-28-2007, 03:38 AM

Thanks Eric,
There is not enough other stuff on the truck that I need right now.
Frank

10-27-2007, 01:28 AM	#1
redhead69 fugedaboutit Join Date: Mar 2005 Location: Gresham, OR Posts: 832	Good solid project. Portland 1969gmc lwb Ive listed this before and didnt really want to get rid of it but now its gotta go. Its a 1969 lwb gmc 2500. Has a good 350 that just needs the carb and battery hooked up then should run good. 350 tranny shifted fine. The cab needs rocker panels to be super solid. Bed floor is rusty. Original bb th400 truck and still has bb towers. Radio delete truck. Dana rear, 2 extra wheels and tires, has aux tanks. It was my parts ***** so its missing a few little things. Anybody interested in this?? Id take 500.00 for everything or 250.00 minus motor Wouldnt take much to get it going seems too nice to pull the motor and scrap and unfortunately thats what I am going to do if it doesnt go soon. __________________ Currently truckless

10-27-2007, 04:17 AM	#2
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	Re: Good solid project. Portland 1969gmc lwb Could you post some pics showing both sides and front? __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

10-27-2007, 09:44 AM	#3
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,837	Re: Good solid project. Portland 1969gmc lwb Tempting...wanna deliver to my house? I see a few things I could use. Give me a PM if someone doesn't pick this up from you. Thanks, Mark

10-27-2007, 09:53 AM	#4
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: Good solid project. Portland 1969gmc lwb If you part out, how's the steering wheel? good luck. __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

10-27-2007, 11:18 AM	#5
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,125	Re: Good solid project. Portland 1969gmc lwb Any rust on core spt? Doors (bottoms)? Other real nice parts?

10-27-2007, 07:41 PM	#6
redhead69 fugedaboutit Join Date: Mar 2005 Location: Gresham, OR Posts: 832	Re: Good solid project. Portland 1969gmc lwb Rickstrucks:belowthe best pics I have right now. I can do better this weekend. Luvlegs- I wont be parting it I need the room fast. Pickmup-The passenger side front fender, inner fender, has rust up front.. so I suspect the bottom of the core support under the battery has a spot of rust too (where the innerfender bolts up). The grill needs the passenger side trim pc replaced and would look new. Doors are good. I see your a vendor, if interested theres a list of stuff I need for my swb and other chevs that we could work in trades.. If interested I could pm you the items Im looking for. __________________ Currently truckless

10-27-2007, 07:42 PM	#7
redhead69 fugedaboutit Join Date: Mar 2005 Location: Gresham, OR Posts: 832	Re: Good solid project. Portland 1969gmc lwb __________________ Currently truckless

10-27-2007, 10:23 PM	#8
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,125	Re: Good solid project. Portland 1969gmc lwb I will buy it...IF it comes with both sets of seats shown in the pics: green buckets & red bench. It is a long trip, but I will take the time & $$$ to come right down & get it out of your way.

10-27-2007, 11:59 PM	#10
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,125	Re: Good solid project. Portland 1969gmc lwb Classic Bowties-Mel, Not sure how you got in on this deal-between the two of us-but, I don't think you are in a position to say what he has for sale...or not. I am trying to clarify what he has offered and shown pics of. He said everything goes, so I am trying to buy. Please don't try to get in and "kill" my offers/buying actions just because you may have wanted them, or you live closer, or you know him. Now, let's just see if he wants to sell this, as shown...unless, you were just sending him some kind of code to sell it to you instead? Thanks, Frank

10-28-2007, 12:36 AM	#12
redhead69 fugedaboutit Join Date: Mar 2005 Location: Gresham, OR Posts: 832	Re: Good solid project. Portland 1969gmc lwb Sorry should have clarified when I posted the later pics for RicksTrucks, the buckets are not included with this truck... my bad eric __________________ Currently truckless

10-28-2007, 03:38 AM	#13
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,125	Re: Good solid project. Portland 1969gmc lwb Thanks Eric, There is not enough other stuff on the truck that I need right now. Frank

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.