Rear Traction/Stablizer Bar Frame Location - The 1947 - Present Chevrolet & GMC Truck Message Board Network

myoldchevytruck · 10-31-2007, 08:40 AM

I preparation of a leaf spring to trailing arms swap, I have a bracket, but don't know it's location. It's the stock frame bracket for the stock rear sway (panhard) bar. Drivers side or passenger side? I am also changing rear ends, but do not have it yet - so current rear end does not have the panhard bracket attached. Any pictures for reference or Web Links? Sure would appreciate it.

Thank

myoldchevytruck · 10-31-2007, 09:16 AM

Found the proper location. Thanks for viewing the thread.

cdowns · 10-31-2007, 09:27 AM

a panhard bar is not and never has been a swaybar

myoldchevytruck · 10-31-2007, 10:00 AM

True

Huck · 10-31-2007, 01:11 PM

Panhard bar goes from drivers side frame bracket to pass side of rear diff hump and bolts into a hole in the casting. Any lowering should include a swap over to an adjustable panhard to ensure rear alignment.

10-31-2007, 08:40 AM	#1
myoldchevytruck Retired Air Force Veteran Join Date: Aug 2007 Location: Pembroke Pines, Florida 33024 Posts: 1,808	Rear Traction/Stablizer Bar Frame Location I preparation of a leaf spring to trailing arms swap, I have a bracket, but don't know it's location. It's the stock frame bracket for the stock rear sway (panhard) bar. Drivers side or passenger side? I am also changing rear ends, but do not have it yet - so current rear end does not have the panhard bracket attached. Any pictures for reference or Web Links? Sure would appreciate it. Thank __________________ Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors

10-31-2007, 09:16 AM	#2
myoldchevytruck Retired Air Force Veteran Join Date: Aug 2007 Location: Pembroke Pines, Florida 33024 Posts: 1,808	Re: Rear Traction/Stablizer Bar Frame Location Found the proper location. Thanks for viewing the thread. __________________ Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors

10-31-2007, 09:27 AM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Rear Traction/Stablizer Bar Frame Location a panhard bar is not and never has been a swaybar __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

10-31-2007, 10:00 AM	#4
myoldchevytruck Retired Air Force Veteran Join Date: Aug 2007 Location: Pembroke Pines, Florida 33024 Posts: 1,808	Re: Rear Traction/Stablizer Bar Frame Location True __________________ Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors

10-31-2007, 01:11 PM	#5
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	Re: Rear Traction/Stablizer Bar Frame Location Panhard bar goes from drivers side frame bracket to pass side of rear diff hump and bolts into a hole in the casting. Any lowering should include a swap over to an adjustable panhard to ensure rear alignment.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.