Shorten steering collum? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Skirtchaser · 11-05-2007, 06:52 PM

Greetings all,
Whats the deal with getting some space fpr my belly in my 66'? Is it easier to buy a kit collum, have the stock unit cut down, or replace with another model?
Thanks!

ClassicAutoResto · 11-05-2007, 07:57 PM

I'm using a van column from my donor G30 cab. Preliminary measurements are looking like about 3 1/2 - 4 inches shorter. I am also using the small evaporator core and heating ducts, switches etc from the van to add on air. Jerry

62 short step · 11-05-2007, 08:27 PM

A 67-72 tilt column would work, that would give you some room by tilting it.

Skirtchaser · 11-12-2007, 08:28 PM

I don't really want to go to a tilt because I like the old style look. I just want to get it about 3" closer to the dash. I heard there is a coupling available somewhere to join the shaft back together after cutting, any thoughts?

Revoh · 11-12-2007, 11:31 PM

62 short step · 11-13-2007, 08:20 AM

Omg!!

fuelpump · 11-13-2007, 09:28 AM

Quote:

Originally Posted by Revoh

HEY!!! I resemble that remark

I'm going with an IDIDIT tilt column in my 60. You can special order a tilt column that doesn't move the grip location (as they call it) back toward the driver as regular IDIDIT titl columns do. I believe there is also a short streering wheel adaptor for aftermarket wheels to move to closer to the dash as well.

BigDaddyDave · 11-13-2007, 09:39 AM

I have that book in my truck,I use it to set my burgers and fries on I do not have a console,so it comes in handy.

**Chevy Fleetside** · 11-13-2007, 10:50 AM

Quote:

Originally Posted by Revoh

yeah baby... Here is a picture of a van tilt column from a 79 chevy van. Not the greatest pic but no key and looks era like..

11-05-2007, 06:52 PM	#1
Skirtchaser Registered User Join Date: Sep 2007 Location: Kingman, Az. Posts: 27	Shorten steering collum? Greetings all, Whats the deal with getting some space fpr my belly in my 66'? Is it easier to buy a kit collum, have the stock unit cut down, or replace with another model? Thanks! __________________ http://www.motherroadrods.com

11-05-2007, 07:57 PM	#2
ClassicAutoResto Rust Buster Join Date: Apr 2007 Location: Lebanon, Ky Posts: 558	Re: Shorten steering collum? I'm using a van column from my donor G30 cab. Preliminary measurements are looking like about 3 1/2 - 4 inches shorter. I am also using the small evaporator core and heating ducts, switches etc from the van to add on air. Jerry

11-05-2007, 08:27 PM	#3
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: Shorten steering collum? A 67-72 tilt column would work, that would give you some room by tilting it.

11-12-2007, 08:28 PM	#4
Skirtchaser Registered User Join Date: Sep 2007 Location: Kingman, Az. Posts: 27	Re: Shorten steering collum? I don't really want to go to a tilt because I like the old style look. I just want to get it about 3" closer to the dash. I heard there is a coupling available somewhere to join the shaft back together after cutting, any thoughts? __________________ http://www.motherroadrods.com

11-12-2007, 11:31 PM	#5
Revoh Registered User Join Date: Nov 2006 Location: Music City, U.S.A. Posts: 638	Re: Shorten steering collum?

11-13-2007, 08:20 AM	#6
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: Shorten steering collum? Omg!!

11-13-2007, 09:39 AM	#8
BigDaddyDave RIP BigDaddyDave ~7-23-09~ You will be missed~ Join Date: Aug 2007 Location: Concord NC Posts: 1,361	Re: Shorten steering collum? I have that book in my truck,I use it to set my burgers and fries on I do not have a console,so it comes in handy.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.