wtb Nice set of Saddle shoulder harnesses - The 1947 - Present Chevrolet & GMC Truck Message Board Network

John H. · 11-13-2007, 10:54 PM

I am in the market for a nice set of saddle shoulder harnesses. I need the entire set including the bolts into the cab.

I do not want redyed but original saddle. Re webbing is OK but the vinyl part and buckles must be original saddle.

71 super · 11-14-2007, 07:58 PM

Contact Gary Terry at CS-M.com Cheyenne super-man he redoes alot of these seat belts and shoulder belts, if that does not work out contact Jerry Brown @ The Truck Shop Crossville Tenn. He will have a set or know where to locate a set if they are around.

John H. · 11-14-2007, 09:39 PM

I have sent the email, Thanks!

**special-K** · 11-15-2007, 09:19 AM

If anyone has any,they will.I have a n.o.s. set I bought from Jerry years ago.Expect them to be salty.Gary Terry does up belts nice,but it`s the plastic pieces that need to be good.

72highlander · 11-15-2007, 03:13 PM

i live 70 miles from gary and do most of my business with him for 20 years. he knows these trucks better than anyone i know and builts great parts, don't hesitate a bit using him.

**Classic Bowties** · 11-17-2007, 01:43 AM

I know it's not saddle, but this single could'a, should'a and would'a been used as some sort of trading stock towards that truck Am/Fm of your's that I had replied about. Anyone out there have a mate/match for this single & very lonely belt? Lmk if your previous deal's fall thru. Cb

HuggerCST · 11-17-2007, 12:31 PM

drool....

**special-K** · 11-17-2007, 11:22 PM

Ditto!!Perfect for a one seat panel job.

11-13-2007, 10:54 PM	#1
John H. Registered User Join Date: Oct 2007 Location: Sammamish, WA Posts: 2,115	wtb Nice set of Saddle shoulder harnesses I am in the market for a nice set of saddle shoulder harnesses. I need the entire set including the bolts into the cab. I do not want redyed but original saddle. Re webbing is OK but the vinyl part and buckles must be original saddle.

11-14-2007, 07:58 PM	#2
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,080	Re: wtb Nice set of Saddle shoulder harnesses Contact Gary Terry at CS-M.com Cheyenne super-man he redoes alot of these seat belts and shoulder belts, if that does not work out contact Jerry Brown @ The Truck Shop Crossville Tenn. He will have a set or know where to locate a set if they are around.

11-14-2007, 09:39 PM	#3
John H. Registered User Join Date: Oct 2007 Location: Sammamish, WA Posts: 2,115	Re: wtb Nice set of Saddle shoulder harnesses I have sent the email, Thanks!

11-15-2007, 09:19 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: wtb Nice set of Saddle shoulder harnesses If anyone has any,they will.I have a n.o.s. set I bought from Jerry years ago.Expect them to be salty.Gary Terry does up belts nice,but it`s the plastic pieces that need to be good. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-15-2007, 03:13 PM	#5
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: wtb Nice set of Saddle shoulder harnesses i live 70 miles from gary and do most of my business with him for 20 years. he knows these trucks better than anyone i know and builts great parts, don't hesitate a bit using him. __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6

11-17-2007, 01:43 AM	#6
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,732	Re: wtb Nice set of Saddle shoulder harnesses I know it's not saddle, but this single could'a, should'a and would'a been used as some sort of trading stock towards that truck Am/Fm of your's that I had replied about. Anyone out there have a mate/match for this single & very lonely belt? Lmk if your previous deal's fall thru. Cb Attached Images Last edited by Classic Bowties; 11-25-2007 at 03:10 PM. Reason: info

11-17-2007, 12:31 PM	#7
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: wtb Nice set of Saddle shoulder harnesses drool.... __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

11-17-2007, 11:22 PM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: wtb Nice set of Saddle shoulder harnesses Ditto!!Perfect for a one seat panel job. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.