|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-15-2007, 07:19 PM
|
#1 |
|
Registered User
Join Date: May 2007
Location: Vista, CA
Posts: 5
|
Help with a front end creek please
I just finished putting my 70 half ton front end together. I rebushed the upper and lower control arms, added plenty of grease during the build. I have made sure the C clamps are tight. The creek happens when the front end is pushed strait down at the grill or front fender. I feel it is definetly coming from the control arms. Ive greased them while a buddy is moving the front end and checked all the body bolts. Whats next?
|
|
|
|
11-15-2007, 09:23 PM
|
#2 |
|
Senior Member
 Join Date: Mar 2003
Location: Colfax-California
Posts: 8,602
|
Re: Help with a front end creek please
Did you also replace the rods or just the end caps? All the hardware tight that holds it to the frame? Ball joint?
|
|
|
|
|
11-15-2007, 09:24 PM
|
#3 |
|
Registered User
Join Date: Mar 2003
Location: Tucson, Az
Posts: 185
|
Re: Help with a front end creek please
got the engine in it yet if not its just the springs playing inside pocket, just wait till you get some weight on it
|
|
|
|
|
11-16-2007, 12:59 AM
|
#4 |
|
Registered User
Join Date: Aug 2005
Location: Hillsboro Oregon
Posts: 6,449
|
Re: Help with a front end creek please
Sway Bar?
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
