|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-15-2007, 09:00 PM
|
#1 |
|
Registered User
Join Date: Sep 2006
Location: Brooksville Fl
Posts: 16
|
Need help finding kind of Wheels....
I just bought these wheels and was told the were the brand Boyd and name Colley. But i looked them up and can't find them i know that he has went out of buisness a couple of times since the wheels were made 5/94. They are 17"x11" & 17"x9" If anyone knows what the wheels are and i could get the caps or if someone has the wheel and could tell me the brand/name and or send a pic of what the caps look like because i got some with the wheels and i was told they fit the wheel but were not thecaps for the wheels I figured out that that was the truth and don't like the way they look in the wheels so they came back off. Hope i can get the pics to post. Also got tires for the front since i toke the pics. Try to post the pics with the tires.Coming soon will be a narrowed rear to acomidate the 11" wide wheels don't like them sticking out the side.Also building a c-notch and bagging it . Building an LT1 or a 327 with a turbo.Hoping for 500-1000 HP .Thanks if anyone has any information on the wheels.
|
|
|
|
11-15-2007, 09:20 PM
|
#2 |
|
laying low
 
Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,514
|
Re: Need help finding kind of Wheels....
You wouldn't be looking for Coy's brand wheels would you? Probably help if you post a pic of the wheel in question.
__________________
Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross |
|
|
|
|
11-15-2007, 10:47 PM
|
#3 |
|
Official Site Guitar Shredder
Join Date: May 2006
Location: Oz
Posts: 3,955
|
Re: Need help finding kind of Wheels....
i think i have the wheels you are talking about...? these are the pics pics i have right now....and the centers the will cost ya....
|
|
|
|
|
11-15-2007, 10:50 PM
|
#4 |
|
Special Order
  
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: Need help finding kind of Wheels....
500-1,000 hp,huh?That`s quite a range for the same motor...We need a picture or at least a description.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
|
|
|
|
03-10-2008, 05:58 AM
|
#5 |
|
Registered User
Join Date: Sep 2006
Location: Brooksville Fl
Posts: 16
|
Re: Need help finding kind of Wheels....
Yeah spiacl k that range i had there was a little dramatic i did not mean that that way i was want to say that i was going to make about 500 hp now but did the dyno on the computer and figured out with the motor i am running and the turbo at 6 psi i am goin to make about 637 hp at 5500 rpm.But When i go with the turbo my brother is running with alum. heads and a dominatotior size carb on my intake with injectors in it and the bowls took off to put trottle postion sinser in and the air fuel ratio it will make about 800-850+ estimated i didn't do the dyno program to see because don't have the turbo size that it is.Thanks sorry about the mistake......
Last edited by slammedc10; 03-10-2008 at 05:59 AM. |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
