lq4 Motor, Tranny, Computer, and Harness $3500 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigo181979 · 11-16-2007, 03:47 PM

See new post with new price

jkade · 11-16-2007, 04:25 PM

Quote:

Originally Posted by bigo181979

I have 6 LS-1 Complete take outs (motor, tranny, harness, and computer) from H2 hummers available for sale. All have less than 50k miles on them. They were removed so as to put duramax motors and allison trannys in to the hummers. I am located in wichita, ks and would prefer locall pickup but I would consider building a pallet and freighting them for the right amount of money. You can PM me here or email me at: bigo181979 at yahoo dot com.
Thanks and I hope this can help someone!

So $3500 for all 6?

wnc mountain · 11-16-2007, 05:39 PM

Quote:

Originally Posted by jkade

So $3500 for all 6?

I'll go for that!

*ksjh1316* · 11-16-2007, 05:57 PM

Dang it wish I had the jack 3500 out of my range right now and no shipping

incoma · 11-16-2007, 06:10 PM

Last time I shipped an engine it cost me $350 using forward air in 2005. That was just an engine - no transmission. I was shipping from MS to CA. I had to supply a pallet and tie downs. I'm sure the cost has gone up with fuel costs where they are now. Hope that answers your question.

bigo181979 · 11-16-2007, 09:51 PM

Wow, thats a hell of a deal! I wish I could let them go for that, but I have more than that in them. Hell I payed almost that much for my LT-1 about a year ago. That would have been a much better buy!

Quote:

Originally Posted by jkade

The last one I sold the had in the 30k range I let go for $1850 shipped and it had everything you have.

bigo181979 · 11-16-2007, 10:02 PM

These are 6.0L LQ4 motors not LS-1's by the way w/4l65E tranny's, based on what I have seen on e-bay I don't think I am to far off but to each their own I guess.

smirch9 · 11-16-2007, 10:19 PM

Folks, Please re-read the forum rules. Its posted at the top of every forum.

XII. It is against our policy for someone to post a complaint about a members price on whatever they are selling. If you don't like the price then skip it. Let it drop to the bottom on its own. They (potential buyers) will figure it out, why nobody is jumping on that particular item.

***Liz*** · 11-16-2007, 10:20 PM

guys this post was reported due to the price discussions. Just keep in mind the following

XII. It is against our policy for someone to post a complaint about a members price on whatever they are selling. If you don't like the price then skip it. Let it drop to the bottom on its own. They (potential buyers) will figure it out, why nobody is jumping on that particular item.
XIII. If you are a long time member, act like one. Lead by example

Thanks

bigo181979 · 11-16-2007, 10:28 PM

Thanks for cleaning that up for me.

IvelDesigns · 11-16-2007, 11:12 PM

Are these the LQ4 or LQ9 engines? Would you consider selling one w/o the tranny/xfer case?

I have no need for a 4wd setup.

bigo181979 · 11-16-2007, 11:24 PM

I will have to double check when I am at the shop tomorrow, but I believe they were LQ4'S, I will make sure of that when I get up their tomorrow. We really dont want to brake up the sets.

IvelDesigns · 11-16-2007, 11:29 PM

this thread may be a good read for those of you considering a motor like this for your truck:

http://www.67-72chevytrucks.com/vboa...d.php?t=260301

killer71 · 11-17-2007, 04:35 PM

Could i get some picts please???

killer71 · 11-17-2007, 04:48 PM

What year engine are those bad boys???

bigo181979 · 11-17-2007, 05:08 PM

The oldest if I remember right is an 04 and the newest is an 06. I will get some pics this weekend. By the way any luck on finding your truck???

killer71 · 11-17-2007, 05:10 PM

Quote:

Originally Posted by bigo181979

The oldest if I remember right is an 04 and the newest is an 06. I will get some pics this weekend. By the way any luck on finding your truck???

nope

bigo181979 · 11-17-2007, 06:00 PM

Quote:

Originally Posted by killer71

nope

Sorry to here that, I guess you will be a pro on this build! To bad you are forced to build another, rather than by choice!

68 short step · 11-17-2007, 08:10 PM

do you have the electronic gas pedals that go with these engines? also i too would like some pics

bigo181979 · 11-17-2007, 08:43 PM

No the pedal set up stayed with the vehicle. I will pm both of you as soon as I have the pics posted.
Thanks,
Orlando

IvelDesigns · 11-17-2007, 08:45 PM

what would you need for one w/o the tranny/xfer case?

killer71 · 11-17-2007, 08:53 PM

r these your personal motors are or you selling for someone else?

bigo181979 · 11-17-2007, 11:14 PM

Are they mine? Yes,I get them from my job (mashmotorsinc.com), we do duramax conversion on H1 and H2 hummers as well as some custom installs, we are also tied into hline conversions (hlineconversion.com) who if you watch CNN tomorrow night their will be a news story about the vehicle we built for Arnold Schwarzenegger and the vehicle we are about to build for Neal Young, they focus on adding dual fuel tech to the duramax, we have reallly been able get some amazing numbers both in HP and MPG.

So anyway I purchase them from my boss and then I turn around and sell them, so yes they are mine.

killer71 · 11-18-2007, 08:07 AM

gotcha...

bigo181979 · 11-18-2007, 09:05 AM

Yeah its a good way to make a little extra pocket cash for both me and him! We have had them sitting in our wharehouse just taking up space and collecting dust so I asked one day and he told me if I wanted them they were mine so we worked out sme numbers and I started selling them. I am hoping to sell enough of them to get my self one.

11-16-2007, 03:47 PM	#1
bigo181979 Junior Member Join Date: Jan 2007 Location: wichita, ks Posts: 242	lq4 Motor, Tranny, Computer, and Harness $3500 See new post with new price Last edited by bigo181979; 12-06-2007 at 03:46 PM. Reason: XIV. Multiple Posting - It is simply not acceptable to post your question more than once, or to post it in more than one forum. Choose the forum that your question or post best fits in

11-16-2007, 05:57 PM	#4
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: LS-1 Motor, Tranny, Computer, and Harness $3500 Dang it wish I had the jack 3500 out of my range right now and no shipping

11-16-2007, 06:10 PM	#5
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	Re: LS-1 Motor, Tranny, Computer, and Harness $3500 Last time I shipped an engine it cost me $350 using forward air in 2005. That was just an engine - no transmission. I was shipping from MS to CA. I had to supply a pallet and tie downs. I'm sure the cost has gone up with fuel costs where they are now. Hope that answers your question. __________________ "Green Monster" (Red Sox fan) 1970 GMC survivor, 350/200 4R, 3.42 rear gears, 2.5/4 drop, ECE disc brake conversion, powder coated suspension

11-16-2007, 10:02 PM	#7
bigo181979 Junior Member Join Date: Jan 2007 Location: wichita, ks Posts: 242	Re: LS-1 Motor, Tranny, Computer, and Harness $3500 These are 6.0L LQ4 motors not LS-1's by the way w/4l65E tranny's, based on what I have seen on e-bay I don't think I am to far off but to each their own I guess. Last edited by bigo181979; 11-18-2007 at 04:39 PM.

11-16-2007, 10:19 PM	#8
smirch9 Registered User Join Date: Jan 2004 Location: Coweta, Oklahoma Posts: 2,389	Re: LS-1 Motor, Tranny, Computer, and Harness $3500 Folks, Please re-read the forum rules. Its posted at the top of every forum. XII. It is against our policy for someone to post a complaint about a members price on whatever they are selling. If you don't like the price then skip it. Let it drop to the bottom on its own. They (potential buyers) will figure it out, why nobody is jumping on that particular item. __________________ 1999 GMC 2500--Natural Gas Powered baby! 2007 Chevrolet Tahoe Have you subscribed? Click here. Order your site t-shirts and apparel here!

11-16-2007, 10:20 PM	#9
*Liz* Catchy title goes here.. Join Date: Mar 2002 Location: Rockwell, NC Posts: 39,762	Re: LS-1 Motor, Tranny, Computer, and Harness $3500 guys this post was reported due to the price discussions. Just keep in mind the following XII. It is against our policy for someone to post a complaint about a members price on whatever they are selling. If you don't like the price then skip it. Let it drop to the bottom on its own. They (potential buyers) will figure it out, why nobody is jumping on that particular item. XIII. If you are a long time member, act like one. Lead by example Thanks

11-16-2007, 10:28 PM	#10
bigo181979 Junior Member Join Date: Jan 2007 Location: wichita, ks Posts: 242	Re: LS-1 Motor, Tranny, Computer, and Harness $3500 Thanks for cleaning that up for me.

11-16-2007, 11:12 PM	#11
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: LS-1 Motor, Tranny, Computer, and Harness $3500 Are these the LQ4 or LQ9 engines? Would you consider selling one w/o the tranny/xfer case? I have no need for a 4wd setup. __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

11-16-2007, 11:24 PM	#12
bigo181979 Junior Member Join Date: Jan 2007 Location: wichita, ks Posts: 242	Re: LS-1 Motor, Tranny, Computer, and Harness $3500 I will have to double check when I am at the shop tomorrow, but I believe they were LQ4'S, I will make sure of that when I get up their tomorrow. We really dont want to brake up the sets. Last edited by bigo181979; 11-16-2007 at 11:26 PM.

11-16-2007, 11:29 PM	#13
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: LS-1 Motor, Tranny, Computer, and Harness $3500 this thread may be a good read for those of you considering a motor like this for your truck: http://www.67-72chevytrucks.com/vboa...d.php?t=260301 __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

11-17-2007, 04:35 PM	#14
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: LS-1 Motor, Tranny, Computer, and Harness $3500 Could i get some picts please??? __________________ R.I.P. Killer 71 10/26/07

11-17-2007, 04:48 PM	#15
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: LS-1 Motor, Tranny, Computer, and Harness $3500 What year engine are those bad boys??? __________________ R.I.P. Killer 71 10/26/07

11-17-2007, 05:08 PM	#16
bigo181979 Junior Member Join Date: Jan 2007 Location: wichita, ks Posts: 242	Re: LS-1 Motor, Tranny, Computer, and Harness $3500 The oldest if I remember right is an 04 and the newest is an 06. I will get some pics this weekend. By the way any luck on finding your truck???

11-17-2007, 08:10 PM	#19
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: LS-1 Motor, Tranny, Computer, and Harness $3500 do you have the electronic gas pedals that go with these engines? also i too would like some pics

11-17-2007, 08:43 PM	#20
bigo181979 Junior Member Join Date: Jan 2007 Location: wichita, ks Posts: 242	Re: LS-1 Motor, Tranny, Computer, and Harness $3500 No the pedal set up stayed with the vehicle. I will pm both of you as soon as I have the pics posted. Thanks, Orlando



Register or Log In To remove these advertisements.

11-17-2007, 08:45 PM	#21
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: LS-1 Motor, Tranny, Computer, and Harness $3500 what would you need for one w/o the tranny/xfer case? __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

11-17-2007, 08:53 PM	#22
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: LS-1 Motor, Tranny, Computer, and Harness $3500 r these your personal motors are or you selling for someone else? __________________ R.I.P. Killer 71 10/26/07

11-17-2007, 11:14 PM	#23
bigo181979 Junior Member Join Date: Jan 2007 Location: wichita, ks Posts: 242	Re: LS-1 Motor, Tranny, Computer, and Harness $3500 Are they mine? Yes,I get them from my job (mashmotorsinc.com), we do duramax conversion on H1 and H2 hummers as well as some custom installs, we are also tied into hline conversions (hlineconversion.com) who if you watch CNN tomorrow night their will be a news story about the vehicle we built for Arnold Schwarzenegger and the vehicle we are about to build for Neal Young, they focus on adding dual fuel tech to the duramax, we have reallly been able get some amazing numbers both in HP and MPG. So anyway I purchase them from my boss and then I turn around and sell them, so yes they are mine. Last edited by bigo181979; 11-17-2007 at 11:23 PM.

11-18-2007, 08:07 AM	#24
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: LS-1 Motor, Tranny, Computer, and Harness $3500 gotcha... __________________ R.I.P. Killer 71 10/26/07

11-18-2007, 09:05 AM	#25
bigo181979 Junior Member Join Date: Jan 2007 Location: wichita, ks Posts: 242	Re: LS-1 Motor, Tranny, Computer, and Harness $3500 Yeah its a good way to make a little extra pocket cash for both me and him! We have had them sitting in our wharehouse just taking up space and collecting dust so I asked one day and he told me if I wanted them they were mine so we worked out sme numbers and I started selling them. I am hoping to sell enough of them to get my self one.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.