need help on a inline six - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*b-rad* · 11-20-2007, 07:41 PM

k my old man has a 82 1/2 ton with a six in it and A/T. how man diff six did they offer that year and what trannys did the offer also

**old Rusty C10** · 11-20-2007, 09:53 PM

i dont believe they offered the 4.3 v6 in that year so it was prolly the 250 Inline 6 cylinder and they would have had a TH350 or the TH400 trans and you identify them by the trans pan the th350 pan looks like a square with one corner clipped the th400 looks kinda like texas

**Captkaos** · 11-21-2007, 05:44 PM

250 or a 292 were the 6 cylinder options.
TH400, TH350 and 700R4 were the autmatic options.
There was also a 3 speed manual and a 4 speed (SM465) manual.

**old Rusty C10** · 11-21-2007, 06:28 PM

wasnt the 700r4 only in Diesels in 82? ( not that it couldnt have been put in by a different ownerbut from factory)

11-20-2007, 07:41 PM	#1
b-rad Account Suspended Join Date: Nov 2007 Location: FT STEWART GA Posts: 509	need help on a inline six k my old man has a 82 1/2 ton with a six in it and A/T. how man diff six did they offer that year and what trannys did the offer also

11-20-2007, 09:53 PM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: need help on a inline six i dont believe they offered the 4.3 v6 in that year so it was prolly the 250 Inline 6 cylinder and they would have had a TH350 or the TH400 trans and you identify them by the trans pan the th350 pan looks like a square with one corner clipped the th400 looks kinda like texas __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

11-21-2007, 05:44 PM	#3
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: need help on a inline six 250 or a 292 were the 6 cylinder options. TH400, TH350 and 700R4 were the autmatic options. There was also a 3 speed manual and a 4 speed (SM465) manual. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

11-21-2007, 06:28 PM	#4
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: need help on a inline six wasnt the 700r4 only in Diesels in 82? ( not that it couldnt have been put in by a different ownerbut from factory) __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.