Wtb-454/4l80 Ecm!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

b454rat · 12-12-2007, 07:52 PM

I'm swapping a TBI454/4L80 into my 92 Blazer. I'm in the process of repinning the connectors to run a 7060 ECM, but if you have a different one, that's fine too. REALLY close to getting started on this, want to do it all at once. If you have the harness to go with the ECM, that's even better!!! Lemme know what you got.

70rs/ss · 12-13-2007, 02:18 PM

I might have one, let me see. Do you have a pict of what it'll look like? I have two Vortec 454's one was with the 4l80e, so I need to see if the ecm is with one of them?

b454rat · 12-13-2007, 03:55 PM

If it's a Vortec, then I can't use it. I have TBI, years were only 91 to 93, maybe 94.

b454rat · 12-13-2007, 04:02 PM

Sorta looks like this...

http://cgi.ebay.com/ebaymotors/ws/eB...ayphotohosting

bigtruck81 · 12-13-2007, 05:52 PM

my 94 454 truck had a 7427 in it

b454rat · 12-14-2007, 01:17 AM

Pretty much any of the early trucks that had that combo will work. I'll take what I can get, I can get the wiring to match the ECM. Was told to use the ECM you have, the 7427, but have the 7060 cause I know it was used in the 454SS trucks. I just want to get it going!!!!!

12-12-2007, 07:52 PM	#1
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,469	Wtb-454/4l80 Ecm!!! I'm swapping a TBI454/4L80 into my 92 Blazer. I'm in the process of repinning the connectors to run a 7060 ECM, but if you have a different one, that's fine too. REALLY close to getting started on this, want to do it all at once. If you have the harness to go with the ECM, that's even better!!! Lemme know what you got. __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 4” SAS 1999 GMC Yukon 350/4L60 6" SAS

12-13-2007, 02:18 PM	#2
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: Wtb-454/4l80 Ecm!!! I might have one, let me see. Do you have a pict of what it'll look like? I have two Vortec 454's one was with the 4l80e, so I need to see if the ecm is with one of them?

12-13-2007, 03:55 PM	#3
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,469	Re: Wtb-454/4l80 Ecm!!! If it's a Vortec, then I can't use it. I have TBI, years were only 91 to 93, maybe 94. __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 4” SAS 1999 GMC Yukon 350/4L60 6" SAS

12-13-2007, 04:02 PM	#4
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,469	Re: Wtb-454/4l80 Ecm!!! Sorta looks like this... http://cgi.ebay.com/ebaymotors/ws/eB...ayphotohosting __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 4” SAS 1999 GMC Yukon 350/4L60 6" SAS

12-13-2007, 05:52 PM	#5
bigtruck81 Registered User Join Date: Feb 2004 Location: northern, in Posts: 350	Re: Wtb-454/4l80 Ecm!!! my 94 454 truck had a 7427 in it

12-14-2007, 01:17 AM	#6
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,469	Re: Wtb-454/4l80 Ecm!!! Pretty much any of the early trucks that had that combo will work. I'll take what I can get, I can get the wiring to match the ECM. Was told to use the ECM you have, the 7427, but have the 7060 cause I know it was used in the 454SS trucks. I just want to get it going!!!!! __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 4” SAS 1999 GMC Yukon 350/4L60 6" SAS

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.