The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-16-2007, 07:32 AM   #1
TotalChevy1
Registered User
 
TotalChevy1's Avatar
 
Join Date: Mar 2007
Location: Phoenix, Arizona
Posts: 175
Gas cap options

I've been looking for a custom cap and think I may have found one, but somewhere I thought I read that 67-71 uses a different cap than the 72's, but this cap is listed on ebay and it say 67-72. Can anyone tell what the differences may be if any. I like the bowtie on the cap, but have had a hard time finding any.
Attached Images
 
__________________
1972 c-20, 350/350, dana 60 w/456 gears(no Posi)
TotalChevy1 is offline   Reply With Quote
Old 12-16-2007, 08:57 AM   #2
GMCBubba
Registered User
 
GMCBubba's Avatar
 
Join Date: Oct 2006
Location: Simpsonville, SC
Posts: 255
Re: Gas cap options

i dont' know the differences, but i did pick up a shiny plain jane cap from autozone. very cheap, very easy, in stock
__________________
1969 GMC 3/4 ton, 307, 4-speed NP435GL, DANA 60, 4.10, HD rear leafs, manual everything, leaking oil and water. Now rocking 383, NV4500, power steering, power brakes. Finally undergoing restoration.
GMCBubba is offline   Reply With Quote
Old 12-16-2007, 09:11 AM   #3
TotalChevy1
Registered User
 
TotalChevy1's Avatar
 
Join Date: Mar 2007
Location: Phoenix, Arizona
Posts: 175
Re: Gas cap options

Quote:
Originally Posted by GMCBubba View Post
i dont' know the differences, but i did pick up a shiny plain jane cap from autozone. very cheap, very easy, in stock
That's what I currently have but was looking to take it to the next level. I just can't rember what made the 72 different than 67-70. I'm not sure if it had to do with emmissions, because if it does I may be able to use, my truck didn't come with any emissions except PVC valve, no cat or air pump
__________________
1972 c-20, 350/350, dana 60 w/456 gears(no Posi)

Last edited by TotalChevy1; 12-16-2007 at 10:36 AM.
TotalChevy1 is offline   Reply With Quote
Old 12-16-2007, 11:13 AM   #4
TotalChevy1
Registered User
 
TotalChevy1's Avatar
 
Join Date: Mar 2007
Location: Phoenix, Arizona
Posts: 175
Re: Gas cap options

ttt
__________________
1972 c-20, 350/350, dana 60 w/456 gears(no Posi)
TotalChevy1 is offline   Reply With Quote
Old 12-16-2007, 11:13 AM   #5
Olden Days
Living In The Past
 
Olden Days's Avatar
 
Join Date: Nov 2003
Location: Rockies
Posts: 709
Re: Gas cap options

I believe the difference is that in 71, 72 with the emissions stuff added they used a non vented cap. prior to that would have been vented.

I just found that auction. That is a nice looking but spendy cap. His description states it goes up to year 70 so I would assume it is a vented cap

Last edited by Olden Days; 12-16-2007 at 11:19 AM.
Olden Days is offline   Reply With Quote
Old 12-16-2007, 11:42 AM   #6
TotalChevy1
Registered User
 
TotalChevy1's Avatar
 
Join Date: Mar 2007
Location: Phoenix, Arizona
Posts: 175
Re: Gas cap options

Your right ..it is a little on the expensive side. Would there be any side effects with the fuel system, if one was used on a none vent system.
__________________
1972 c-20, 350/350, dana 60 w/456 gears(no Posi)
TotalChevy1 is offline   Reply With Quote
Old 12-16-2007, 11:49 AM   #7
Longhorn Man
its all about the +6 inches
 
Longhorn Man's Avatar
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
Re: Gas cap options

All these trucks came with emissions control, every one built.
In 71, all trucks had a return line and charchol canister, and required a different cap from 70 and older. I *think* the older ones were vented, and the later ones were not. That, or the other way around.
Longhorn Man is offline   Reply With Quote
Old 12-16-2007, 12:15 PM   #8
TotalChevy1
Registered User
 
TotalChevy1's Avatar
 
Join Date: Mar 2007
Location: Phoenix, Arizona
Posts: 175
Re: Gas cap options

Quote:
Originally Posted by Longhorn Man View Post
All these trucks came with emissions control, every one built.
In 71, all trucks had a return line and charchol canister, and required a different cap from 70 and older. I *think* the older ones were vented, and the later ones were not. That, or the other way around.
Is the canister at the fuel pump? there are two fuel line to the fuel pump. Is the purpose of the cap to keep the system under presure? If so, what would happen if you used a vented cap?
__________________
1972 c-20, 350/350, dana 60 w/456 gears(no Posi)
TotalChevy1 is offline   Reply With Quote
Old 12-16-2007, 01:04 PM   #9
Longhorn Man
its all about the +6 inches
 
Longhorn Man's Avatar
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
Re: Gas cap options

i think the canister is in the fenderwell or something. Never bothered looking for it.
I *THINK* if you used a vented cap, then the stored fumes in the charchol canister wouldn't get sucked out properly?
If that's not right, than I have no clue.
Longhorn Man is offline   Reply With Quote
Old 12-16-2007, 01:07 PM   #10
ChevLoRay
Old Skool Club
 
ChevLoRay's Avatar
 
Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
Re: Gas cap options

Several years ago, Custom Truck magazine had an article that was intended to showcase the options for our trucks. One picture showed a stock gas cap, the stainless steel version, and stated that it was very rare to see one due to so many of them getting lost at the filling stations over the years. I still have mine but replaced it on 9-11-01 with a locking NAPA cap.....call it panic at the time due to the uncertainty of the moment.

But they said stock stainless gas caps were rare. Geeze, whodathunk?
__________________
Member Nr. 2770

'96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed.

'69 C-10 SWB; 350/TH400 - in limbo

The older I get, the better I was.
ChevLoRay is offline   Reply With Quote
Old 12-16-2007, 01:38 PM   #11
Longhorn Man
its all about the +6 inches
 
Longhorn Man's Avatar
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
Re: Gas cap options

99% of the ones you see today are chrome, not stainless
Longhorn Man is offline   Reply With Quote
Old 12-16-2007, 01:55 PM   #12
68caliRat
Need a bigger hammer..
 
Join Date: Feb 2007
Location: Escondido,CA.
Posts: 280
Re: Gas cap options

Quote:
Originally Posted by Longhorn Man View Post
All these trucks came with emissions control, every one built.
In 71, all trucks had a return line and charchol canister, and required a different cap from 70 and older. I *think* the older ones were vented, and the later ones were not. That, or the other way around.
When you say "everyone" I think smog pumps and cats, mine is stock(been in the family almost since new, and only has a PCV. Which runs to the spacer between the carb and air cleaner. Other than that...NADA.
__________________
1968 GMC 3/4 LWB fleetside Custom Camper
2018 Silverado High Country 2500HD Duramax 4X4
68caliRat is offline   Reply With Quote
Old 12-16-2007, 02:21 PM   #13
Longhorn Man
its all about the +6 inches
 
Longhorn Man's Avatar
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
Re: Gas cap options

the air cleaner with snorkle is a smog item
the PCV
The hose going to the carb from the valve cover
the ECS crap
the heat riser leading to the air cleaner from the manifold
All these are emissions control items.
Smog control began in 64 in cars... I think started on GM trucks a few years later.
Longhorn Man is offline   Reply With Quote
Old 12-16-2007, 02:29 PM   #14
68caliRat
Need a bigger hammer..
 
Join Date: Feb 2007
Location: Escondido,CA.
Posts: 280
Re: Gas cap options

Must be, I just don't see how it would significantly reduce the emissions from my truck...seems like a waste..
__________________
1968 GMC 3/4 LWB fleetside Custom Camper
2018 Silverado High Country 2500HD Duramax 4X4
68caliRat is offline   Reply With Quote
Old 12-16-2007, 03:22 PM   #15
Olden Days
Living In The Past
 
Olden Days's Avatar
 
Join Date: Nov 2003
Location: Rockies
Posts: 709
Re: Gas cap options

Quote:
Originally Posted by Longhorn Man View Post
All these trucks came with emissions control, every one built.
In 71, all trucks had a return line and charchol canister, and required a different cap from 70 and older. I *think* the older ones were vented, and the later ones were not. That, or the other way around.
The return line and charchol canister was the "added" emissions I was talking about, which is why it needs the non vented cap.

TotalChevy. If you have to pass an emission test it wont pass with a vented cap but otherwise you can run it
Olden Days is offline   Reply With Quote
Old 12-16-2007, 03:40 PM   #16
TotalChevy1
Registered User
 
TotalChevy1's Avatar
 
Join Date: Mar 2007
Location: Phoenix, Arizona
Posts: 175
Re: Gas cap options

Quote:
Originally Posted by Olden Days View Post
The return line and charchol canister was the "added" emissions I was talking about, which is why it needs the non vented cap.

TotalChevy. If you have to pass an emission test it wont pass with a vented cap but otherwise you can run it
We'll I just keep the other cap for emissions. I've been doing a little reading and the general opinion is all 72's came with emissions. When I came home I checks and this truck never had a charcoal canister, the fue tank doesn't even have the lines on it. There no signs the tank has evey been taken out. The orginial owner never changed anything on this truck, so I trying to figure this mystery out. All it's had is a PVC....no cat, no air pump....could this be
__________________
1972 c-20, 350/350, dana 60 w/456 gears(no Posi)

Last edited by TotalChevy1; 12-16-2007 at 03:43 PM.
TotalChevy1 is offline   Reply With Quote
Old 12-16-2007, 03:45 PM   #17
TotalChevy1
Registered User
 
TotalChevy1's Avatar
 
Join Date: Mar 2007
Location: Phoenix, Arizona
Posts: 175
Re: Gas cap options

Quote:
Originally Posted by Longhorn Man View Post
99% of the ones you see today are chrome, not stainless
How do you determine if they are stainless, my has a shine to it, but when you us a metal cleaner it turns the rag black
__________________
1972 c-20, 350/350, dana 60 w/456 gears(no Posi)

Last edited by TotalChevy1; 12-16-2007 at 03:50 PM.
TotalChevy1 is offline   Reply With Quote
Old 12-16-2007, 07:05 PM   #18
70c10
67-72 Addict!
 
70c10's Avatar
 
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,856
Re: Gas cap options

I recently put a brand new 71/72' cap (didn't realize it) on my dad's 70' and it wouldn't run!. I started chasing my tail because I couldn't figure out what the heck was wrong with his truck. I then remembered that the caps were different and verified it in a parts catalog. I put his old cap back on and the truck roared to life! Be careful and keep this in mind in case this happens after swapping caps!
__________________
Jim

1970 C/10 Fleetside w/Ghost Flames
Lowered 4.5" front and 4" rear (Raked)
355/350 Turbo w/shift kit
10" Redneck Performance Verter w/2500 stall
Hooker Super Comps part#2808-1
Performer RPM Air-Gap
12 Bolt w/3:73 gears- Eaton Posi
Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads
70c10 is offline   Reply With Quote
Old 12-17-2007, 09:23 AM   #19
Longhorn Man
its all about the +6 inches
 
Longhorn Man's Avatar
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
Re: Gas cap options

Quote:
Originally Posted by TotalChevy1 View Post
How do you determine if they are stainless, my has a shine to it, but when you us a metal cleaner it turns the rag black
that would be stainless then
Longhorn Man is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:34 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com