Not Seen-10 But... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andy4639 · 12-17-2007, 09:57 AM

This is going to be a multi post for all the pictures...I know how we all love pictures here!

Well I have it back together almost. We drove it yesterday for the first time since I got it back. I had a rear end leak and fixed that and found the transmission leaking while under it and I hope I fixed it as well. All the bolts were loose. The guy came Thursday and penstripped it. Took almost 4 1/2 hrs. Free hand.

I started working on the inside of it and got the dash pad done, door panel pattern's made but not covered. I need to do some touching up on the bottom of the dash and try and save my armrest's. I have to wait after Christmas to order the carpet and new floor mat's. The stain on the driver side happened years ago after working on the dash...don't ask!

These are some random inside & outside shot's.

Andy4639 · 12-17-2007, 10:05 AM

These are my speaker pictures of the subs and tweeter's I have a set of 3 way's under the seat's. I built a box for the driverside 3 way so it would not just sit in the floor under the seat and the seat still can slid forward.

I was trying to find a place to put the little tweeter's when I noticed the hanger clip on the passenger side...well the rest is history.

These are my mirror's I did the last time it was painted. Just took the vents out and made a pattern and placed them with metal. The screw in and bolt in just like the vent window did.

More pictures later, got to go do some more to the truck.

Here are some better shots of the pattern of my door panels. The bottom screw's will be replaced with the plastic inserts before I cover the panel. They will be under the material.

**Boog** · 12-17-2007, 10:07 AM

Your truck is coming along real nice. I have a question though. About those vent windows. What are your plans for those? Looks like a large blind spot.

Andy4639 · 12-17-2007, 10:23 AM

Thanks the truck is almost back together, just details now.
No blind spot at all. They have been like this now for about 6 years. I have no plan to change them.

toomanytoyz · 12-17-2007, 10:35 AM

Your Truck Look's Great, I Really Like the Color Choice & The Way You Did the Fuel Injection on the Rear of Bed . Remind's me of the Old Fuelie Vette's.............

Congrat's on a Great Work of Art.............

Rick

Merry Christmas

Andy4639 · 12-17-2007, 10:53 AM

Thanks,
speaking of Fuel injection...

Gas neck is gone finally.

Here is a couple of front shots. Shows the louvers and front bumper.

It started raining today so I can't get no over all picture today.

clemson71guy · 12-17-2007, 11:02 AM

great lookin truck

retodd7711 · 12-17-2007, 11:29 AM

great job!

Andy4639 · 12-17-2007, 02:18 PM

I guess it will be worth it all. I know it's consumed a lot of my time lately.

69TowRig · 12-17-2007, 02:38 PM

I LOVE the truck. HATE the seats. What are the plans for those?

**Palf70Step** · 12-17-2007, 03:31 PM

Truck came together real well. I love how the color combo works together on it. Great job. She should keep you going another 10 years or so!

Andy4639 · 12-17-2007, 03:55 PM

69TowRig,

Quote:

I LOVE the truck. HATE the seats. What are the plans for those?

Sorry but the seat is staying as is. May clean it up and get it looking better. They are very comfortable and I have plenty of leg room.

badpeanut · 12-17-2007, 05:28 PM

Quote:

Originally Posted by Andy4639

Here is a couple of front shots. Shows the louvers and front bumper.

I like your front bumper; more information, please!

72BlckButy · 12-17-2007, 05:54 PM

The truck has really come together and looks great!

Rokcrln · 12-17-2007, 06:07 PM

Yep I bet you won't fire it up again with the oil PSI line not conected! Been their done that! Good looking truck, so it it a work truck or what? Asking because of the bed box. Are you going to be one of the lucky few to drive theirs and make money doing it?

Kevin
LFD inc.

jcnalley · 12-17-2007, 09:37 PM

Looks good.It's coming together nicely.The only thing that I dislike is the speaker box under the seat...it looks out of place.But overall,excellent job on the truck.

ChevLoRay · 12-18-2007, 07:01 AM

It's very evident that you have spent a lot of your time and money, and have thought very much about what you wanted to do and how you wanted your truck to look. We should all take notice of the planning you did and know that nothing we do can be done without planning and execution.

Tenacity....we all need it to do what we want to do. Congrats.

Andy4639 · 12-18-2007, 02:09 PM

Thanks everyone for the nice comments.

badpeanut,
Thanks for the picture. I took that one on a overcast day. It's hard to get them to show up in the sunlight.

Rokcrln,
Know I want, you can count on it. This is my work truck. I drive it back and forth to the job everyday...well I don't know about now though. I have been driving it for 21 years.

jcnalley,
Yes the speaker box is a little out of place but I'm going to redo it and make it more eye friendly. You should see the other side though! It's just sitting under the seat in the orignal box it came in. I have to redo it also and make some kind of box for it.

ChevLoRay,
Yes I have been planning this since last March before the Myrtle Beach Car show. I didn't go the past 2 years because of the way the truck's paint looked. This past March I told my wife the money I make off of building Golfcarts was going to get the truck redone. Well it's done except a few small things like carpet, grille and some other iteam's that I want but don't have to buy right away...Christmas is got to be taken care of first.

OK here are some outside shot's I took today.

I know some of these, well most of them you have seen before but not in the sun light.

12-17-2007, 09:57 AM	#1
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Not Seen-10 But... This is going to be a multi post for all the pictures...I know how we all love pictures here! Well I have it back together almost. We drove it yesterday for the first time since I got it back. I had a rear end leak and fixed that and found the transmission leaking while under it and I hope I fixed it as well. All the bolts were loose. The guy came Thursday and penstripped it. Took almost 4 1/2 hrs. Free hand. I started working on the inside of it and got the dash pad done, door panel pattern's made but not covered. I need to do some touching up on the bottom of the dash and try and save my armrest's. I have to wait after Christmas to order the carpet and new floor mat's. The stain on the driver side happened years ago after working on the dash...don't ask! These are some random inside & outside shot's. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. Last edited by Andy4639; 12-17-2007 at 10:54 AM.

12-17-2007, 10:05 AM	#2
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Not Seen-10 But... These are my speaker pictures of the subs and tweeter's I have a set of 3 way's under the seat's. I built a box for the driverside 3 way so it would not just sit in the floor under the seat and the seat still can slid forward. I was trying to find a place to put the little tweeter's when I noticed the hanger clip on the passenger side...well the rest is history. These are my mirror's I did the last time it was painted. Just took the vents out and made a pattern and placed them with metal. The screw in and bolt in just like the vent window did. More pictures later, got to go do some more to the truck. Here are some better shots of the pattern of my door panels. The bottom screw's will be replaced with the plastic inserts before I cover the panel. They will be under the material. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. Last edited by Andy4639; 12-17-2007 at 11:03 AM.

12-17-2007, 10:07 AM	#3
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,453	Re: Not Seen-10 But... Your truck is coming along real nice. I have a question though. About those vent windows. What are your plans for those? Looks like a large blind spot. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

12-17-2007, 10:23 AM	#4
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Not Seen-10 But... Thanks the truck is almost back together, just details now. No blind spot at all. They have been like this now for about 6 years. I have no plan to change them. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

12-17-2007, 10:35 AM	#5
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: Not Seen-10 But... Your Truck Look's Great, I Really Like the Color Choice & The Way You Did the Fuel Injection on the Rear of Bed . Remind's me of the Old Fuelie Vette's............. Congrat's on a Great Work of Art............. Rick Merry Christmas __________________ 55 Nomad 52 Willys Truck 67 Stepper 67 Fleet 68 Wrecker 68 Suburban 76 Crewcab 79 Gmc Dumptruck 84 Blazer 86 Crewcab Stepside 87 Iroc 89 GMC Plow Truck 91 Camaro Vert 96 Z71 Stepsde

12-17-2007, 10:53 AM	#6
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Not Seen-10 But... Thanks, speaking of Fuel injection... Gas neck is gone finally. Here is a couple of front shots. Shows the louvers and front bumper. It started raining today so I can't get no over all picture today. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. Last edited by Andy4639; 12-17-2007 at 11:08 AM.

12-17-2007, 11:02 AM	#7
clemson71guy Registered User Join Date: Oct 2007 Location: north carolina Posts: 470	Re: Not Seen-10 But... great lookin truck

12-17-2007, 11:29 AM	#8
retodd7711 chrome makes it go FASTER! Join Date: Feb 2007 Location: Cleveland Tennessee Posts: 2,884	Re: Not Seen-10 But... great job! __________________ She can't cook and she won't clean. But she looks good in a skirt and she brings me beer. She can stay for now. EDIT:: But she left me anyway, So forget her. 1962 GMC Stepside V6 4 speed My rolling resto thread http://67-72chevytrucks.com/vboard/s...d.php?t=324226 My old farm truck http://67-72chevytrucks.com/vboard/s...=1#post3465005

12-17-2007, 02:18 PM	#9
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Not Seen-10 But... I guess it will be worth it all. I know it's consumed a lot of my time lately. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

12-17-2007, 02:38 PM	#10
69TowRig Senior Member Join Date: Jan 2005 Location: Raleigh, NC Posts: 894	Re: Not Seen-10 But... I LOVE the truck. HATE the seats. What are the plans for those? __________________ -Chris Building a stripper, one part at a time: 1969 K5, 307, 3spd, 3 seats, hard top. Added Pwr Discs, Pwr Steering, Aux Battery, T-case Skid, Lighted Sidemarkers, HEI, Lock-Right Diff, ECE Class IV Hitch, 32" MT/Rs. Parts to Install: Hand Throttle, Console, Tow Hooks, Dual Horns, AM-FM, Dealer Swing-Away Tire Carrier, Gas Tank Skid. Also building a 1950 Willys CJ-3A and off-roading a 2001 Nissan Frontier on 1-Ton Portals...

12-17-2007, 03:31 PM	#11
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Re: Not Seen-10 But... Truck came together real well. I love how the color combo works together on it. Great job. She should keep you going another 10 years or so! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

12-17-2007, 05:54 PM	#14
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Not Seen-10 But... The truck has really come together and looks great! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

12-17-2007, 06:07 PM	#15
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Not Seen-10 But... Yep I bet you won't fire it up again with the oil PSI line not conected! Been their done that! Good looking truck, so it it a work truck or what? Asking because of the bed box. Are you going to be one of the lucky few to drive theirs and make money doing it? Kevin LFD inc.

12-17-2007, 09:37 PM	#16
jcnalley Registered User Join Date: Jul 2007 Location: Rockingham,NC Posts: 31	Re: Not Seen-10 But... Looks good.It's coming together nicely.The only thing that I dislike is the speaker box under the seat...it looks out of place.But overall,excellent job on the truck.

12-18-2007, 07:01 AM	#17
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: Not Seen-10 But... It's very evident that you have spent a lot of your time and money, and have thought very much about what you wanted to do and how you wanted your truck to look. We should all take notice of the planning you did and know that nothing we do can be done without planning and execution. Tenacity....we all need it to do what we want to do. Congrats. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.



Register or Log In To remove these advertisements.

12-18-2007, 02:09 PM	#18
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Not Seen-10 But... Thanks everyone for the nice comments. badpeanut, Thanks for the picture. I took that one on a overcast day. It's hard to get them to show up in the sunlight. Rokcrln, Know I want, you can count on it. This is my work truck. I drive it back and forth to the job everyday...well I don't know about now though. I have been driving it for 21 years. jcnalley, Yes the speaker box is a little out of place but I'm going to redo it and make it more eye friendly. You should see the other side though! It's just sitting under the seat in the orignal box it came in. I have to redo it also and make some kind of box for it. ChevLoRay, Yes I have been planning this since last March before the Myrtle Beach Car show. I didn't go the past 2 years because of the way the truck's paint looked. This past March I told my wife the money I make off of building Golfcarts was going to get the truck redone. Well it's done except a few small things like carpet, grille and some other iteam's that I want but don't have to buy right away...Christmas is got to be taken care of first. OK here are some outside shot's I took today. I know some of these, well most of them you have seen before but not in the sun light. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.