|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-18-2007, 02:44 PM
|
#1 |
|
Registered User
Join Date: Dec 2003
Location: albuquerque
Posts: 431
|
How do I separate an 1157 bulb?
I know sounds like a weird question, but I'd to know how to separate the glass from the base... I'm going to build my own led taillights and I need the base so I can use the existing sockets...
Thanks in advance! donovan
__________________
78 C10 LWB Super Cheyenne |
|
|
|
12-18-2007, 03:03 PM
|
#2 |
|
just can't cover up my redneck
Join Date: May 2004
Location: Columbus OH
Posts: 11,414
|
Re: How do I separate an 1157 bulb?
Hammer?
|
|
|
|
|
12-18-2007, 03:24 PM
|
#3 |
|
Senior Member
Join Date: Nov 2003
Location: Brookings, SD
Posts: 10,497
|
Re: How do I separate an 1157 bulb?
I am pretty sure you can buy a base with two leads coming out of it, if you don't want to make your own.
__________________
Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs. |
|
|
|
|
12-18-2007, 03:28 PM
|
#4 |
|
Account Suspended
Join Date: Nov 2007
Location: FT STEWART GA
Posts: 509
|
Re: How do I separate an 1157 bulb?
u can heat the glue up that holds it to the base and it (SHOULD) come right off
|
|
|
|
|
12-18-2007, 03:59 PM
|
#5 |
|
BlahBlahBlah
Join Date: Feb 2002
Location: Wa.
Posts: 20,035
|
Re: How do I separate an 1157 bulb?
Mine always seperate themselfs when Im trying to replace em.
Last edited by CG; 12-18-2007 at 04:33 PM. |
|
|
|
|
12-18-2007, 04:05 PM
|
#6 |
|
Overdrive club
Join Date: Sep 2007
Location: apache junction, arizona
Posts: 819
|
Re: How do I separate an 1157 bulb?
 
__________________
1971 c-10 1951 3100 chevy 1970 chevy c-30 Sold! |
|
|
|
|
12-18-2007, 04:31 PM
|
#7 |
|
Registered User
Join Date: Nov 2003
Location: Alexandria, VA
Posts: 1,534
|
Re: How do I separate an 1157 bulb?
They get pretty darn hot when in use so I don't think heat is the answer, unless you plan to "blow" some new glass globes
__________________
'72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction.   
|
|
|
|
|
12-18-2007, 05:38 PM
|
#8 |
|
Account Suspended
Join Date: Nov 2007
Location: FT STEWART GA
Posts: 509
|
Re: How do I separate an 1157 bulb?
it works on a house light bulb dont ask how i know this
|
|
|
|
|
12-18-2007, 05:53 PM
|
#9 | |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
Re: How do I separate an 1157 bulb?
Quote:
Where at? |
|
|
|
|
|
12-18-2007, 05:59 PM
|
#10 |
|
Registered User
Join Date: Jan 2001
Location: skamokawa, WA, USA
Posts: 527
|
Re: How do I separate an 1157 bulb?
I've sprayed a product called Corrosion Block in the sockets before. It usually makes the bulb come apart as well.. not intended.
__________________
70 C10 long fleet, 355/200 4r, 6 lug disc conversion, 3" drop 70 gmc changed to 67/8 chevy, 454 with voodoo cam, th400, all 74 running gear.. in progress |
|
|
|
|
12-18-2007, 06:09 PM
|
#11 |
|
Registered User
Join Date: Sep 2005
Location: Utica, NY
Posts: 315
|
Re: How do I separate an 1157 bulb?
i bought a set of l.e.d. 1157 bulbs. they were only $10 for 2. been in my truck for two years...
|
|
|
|
|
12-18-2007, 08:01 PM
|
#12 |
|
Registered User
Join Date: Nov 2006
Location: lafayette, ga.
Posts: 832
|
Re: How do I separate an 1157 bulb?
i would buy an 1157 led already to install
__________________
 Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream.It must be fought for, protected, and handed on for them to do the same.... Ronald Reagan |
|
|
|
|
12-19-2007, 12:54 AM
|
#13 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
Re: How do I separate an 1157 bulb?
those LED bulbs completely suck compaired to an LED panel. I would NEVER use those for tail lights. They don't put out enough light to be safe, nor to be DOT certified.
|
|
|
|
|
12-19-2007, 03:39 AM
|
#14 |
|
Registered User
Join Date: Dec 2003
Location: albuquerque
Posts: 431
|
Re: How do I separate an 1157 bulb?
Well after seeing the led panel that some other board members have created I wanted a set. And since I have some experience with electronics I made the decision to make my own. I seen how their pigtail was wired up and thought that there may be a way to separate the glass from the base without damaging the base... I guess the hammer method would work, I'll just need to be careful to not damage the base...
Thanks. PS. Has anyone thought of doing an led panel for the dome light? Hadn't seen any postings regarding that idea.
__________________
78 C10 LWB Super Cheyenne |
|
|
|
|
12-19-2007, 04:27 AM
|
#15 |
|
I miss this truck.
Join Date: Dec 2001
Location: Lexington, KY U.S.A.
Posts: 2,863
|
Re: How do I separate an 1157 bulb?
http://superbrightleds.com/led_prods.htm
Has the 1157's with up to 30 LED's seems like they ought to be bright enough. Also have the dome lights pre-made. Also sells the base with wiring pigtails, I believe. Poke around a little, I'd say they have anything you'd ever want in an LED product.
__________________
'07 GMC Acadia SLT. Sweet ride. '08 Crew Cab Z-71 short bed. Really like this truck A LOT. |
|
|
|
|
12-19-2007, 08:35 AM
|
#16 | |
|
Senior Member
Join Date: Apr 2005
Location: Joppa, Maryland
Posts: 4,408
|
Re: How do I separate an 1157 bulb?
Quote:
__________________
1997 GMC Sierra Ext 1965 Mustang |
|
|
|
|
|
12-19-2007, 01:00 PM
|
#17 | |
|
Registered User
Join Date: Sep 2005
Location: Utica, NY
Posts: 315
|
Re: How do I separate an 1157 bulb?
Quote:
|
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
