question about rear ends - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ole school · 12-22-2007, 02:30 PM

i have a 68 gmc truck with no rear end in it i was wondering if a chevy one would fit or what can i bolt up to it without trouble

jkade · 12-22-2007, 03:13 PM

Is is a coil spring set up? If you were closer I would give you one I have out of my 67.

**special-K** · 12-23-2007, 02:15 AM

It`s probably leaf,right?It it was coil I may know why it`s gone.The GMCs had a tough little Dana60 6-lugger that`s the toughest rear you can bolt into the coil-rear trucks.Leaf was standard on GMCs with coils an option.The opposite for Chevys.If you have trailing arms(coil)you can bolt any 67-72 coil rear in.If you have leafs you can bolt any 67-72 rear in.You can use later GM 12-bolts but will need to relocate the spring perches for leaf or coil and provide mounting for the track bar.

Huck · 12-23-2007, 03:41 AM

Let's get specific---1/2 ton or 3/4?? 2wd or 4x4?? Coil or leaf? You can bolt anything to anything but if you want it to work well, well----what is your truck?

12-22-2007, 02:30 PM	#1
ole school Registered User Join Date: Jun 2005 Location: chapmansboro tn Posts: 29	question about rear ends i have a 68 gmc truck with no rear end in it i was wondering if a chevy one would fit or what can i bolt up to it without trouble __________________ IT'S HARD TO MAKE CHICKEN SALAD WHEN YOUR USING CHICKEN S......... 1968 crew cab build (under construction)

12-22-2007, 03:13 PM	#2
jkade Senior Member Join Date: Nov 2005 Location: AL Posts: 2,519	Re: question about rear ends Is is a coil spring set up? If you were closer I would give you one I have out of my 67.

12-23-2007, 02:15 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: question about rear ends It`s probably leaf,right?It it was coil I may know why it`s gone.The GMCs had a tough little Dana60 6-lugger that`s the toughest rear you can bolt into the coil-rear trucks.Leaf was standard on GMCs with coils an option.The opposite for Chevys.If you have trailing arms(coil)you can bolt any 67-72 coil rear in.If you have leafs you can bolt any 67-72 rear in.You can use later GM 12-bolts but will need to relocate the spring perches for leaf or coil and provide mounting for the track bar. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-23-2007, 03:41 AM	#4
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Re: question about rear ends Let's get specific---1/2 ton or 3/4?? 2wd or 4x4?? Coil or leaf? You can bolt anything to anything but if you want it to work well, well----what is your truck?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.