Well I think... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andy4639 · 12-24-2007, 03:10 AM

I'm done with it except for the headliner. I broke the trim all into peices while removing it it was so brital it just fell apart. I have to order one later but Christmas comes first!

I have the outside done:
Before:

After

The motor:
Before:

After:

Interior: I did away with the door speaker's and made a one peice door panel. I used grey to break up the red also.
Before:

After:

The gate:
Before

After

**70cst** · 12-24-2007, 03:40 AM

Andy4639...That is one saweet looking You have very nice finished product. A job well done!!

Andy4639 · 12-24-2007, 03:57 AM

Thanks, I think it turned out nicely!

**special-K** · 12-24-2007, 04:12 AM

I really like the door panels.Did you do that yourself?I want roll`n`pleated in my`67 project.

Andy4639 · 12-24-2007, 04:20 AM

special-K

Quote:

I really like the door panels.Did you do that yourself?I want roll`n`pleated in my`67 project.

Yes I did them myself. I bought the material as you see it. It had the plet's backing everything on it just cut and put on the panel. I did the driver's side twice, passenger side once and still have enough for the headliner and I got the dash cover plather too for $75.00. I have enough of it to do the sun viser's too!

FRENCHBLUE72 · 12-24-2007, 05:11 AM

Looks good,but I do have a ? whats up with the steering wheel a truck that nice deserves better...

Andy4639 · 12-24-2007, 12:12 PM

FRENCHBLUE72

Quote:

Looks good,but I do have a ? whats up with the steering wheel a truck that nice deserves better...

That is a corvette leather wheel. It's been in the truck for over 10 years. I have corpral tunnel in both hands and it makes it more comftable for me to grip. I agree it needs to be redone just haven't gotten to that point yet.

12-24-2007, 03:10 AM	#1
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Well I think... I'm done with it except for the headliner. I broke the trim all into peices while removing it it was so brital it just fell apart. I have to order one later but Christmas comes first! I have the outside done: Before: After The motor: Before: After: Interior: I did away with the door speaker's and made a one peice door panel. I used grey to break up the red also. Before: After: The gate: Before After __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. Last edited by Andy4639; 12-24-2007 at 03:56 AM.

12-24-2007, 03:40 AM	#2
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,375	Re: Well I think... Andy4639...That is one saweet looking You have very nice finished product. A job well done!! __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! Last edited by 70cst; 12-24-2007 at 03:41 AM.

12-24-2007, 03:57 AM	#3
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Well I think... Thanks, I think it turned out nicely! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

12-24-2007, 04:12 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Well I think... I really like the door panels.Did you do that yourself?I want roll`n`pleated in my`67 project. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-24-2007, 05:11 AM	#6
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Well I think... Looks good,but I do have a ? whats up with the steering wheel a truck that nice deserves better... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.