10-14-2002, 09:39 AM | #1 |
Registered User
Join Date: Sep 2002
Location: fort collins
Posts: 27
|
body molding
anybody out there have anything beside the original molding on their trucks... ive come up with some different ideas but would like to hear thoughts, opinions, answers and well if you got them id like to see some pictures too..... im just curious
__________________
69 gmc 350/350 in colorful colorado |
10-14-2002, 03:56 PM | #2 |
Southern but in Ohio!!!!
Join Date: Jan 2002
Location: Eaton,Oh. 45320
Posts: 467
|
what ever you do dont put that chrome looking trim with the 3m glue on it you get at the local parts store the chrome will come off leaving a plastic looking stuff, the black trim isnt bad, but I like the stock trim if any is on it.
__________________
1969 C/10 3/4 ton 4x4 longbed custom, frame made from a 79 1972 custom-10 half/ton longbed 1980 1/2 ton 4x4 all original 350/350/205 with air Eaton,Oh rebelryder@hotmail.com |
10-14-2002, 10:08 PM | #3 |
Registered User
Join Date: Mar 2001
Location: Paradise TX USA
Posts: 1,200
|
At the time I rebuilt this truck 14 years ago, I couldn't find any of the OEM molding that was any good , so I used The late 80's GMC rubber molding on the lower, and Mid 80's Ford F 150 rubber molding for the upper. It has held up pretty well and still looks ok. Eventually , I plan to put the original stuff back on since it's available as reproduction pieces now.
__________________
"Negative people always seem to have a problem for every solution" |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|