01-01-2008, 04:23 PM | #1 |
Senior Member
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
|
72 blazer w/ cummins
i haven't been on alot lately due to being busy and whatnot, but i thought i would share some cool stuff
last week a i started putting a early 90s 12 valve in a 72 blazer. eventually the bracketry might be offered in kit form, but so far the fitment is not causing terrible issues. sorry i don't have photos as my camera is down for the count as of right now. this rig will end up with a getrag five speed and a 205. it also has an 8 inch lift and some 40 inch military michelins. its a pretty cool rig and had a 454/465/205 in it to begin with. more to come as i progress. Ryan |
01-01-2008, 04:29 PM | #2 |
Registered User
Join Date: Apr 2007
Location: Dallas,TX.
Posts: 499
|
Re: 72 blazer w/ cummins
cool, my next truck is a SWB dually with a cummins 4bt and 400TH have not decided which front clip to use 67-68 or 71-72
|
01-01-2008, 04:41 PM | #3 |
Registered User
Join Date: Apr 2007
Location: Freedom CA
Posts: 488
|
Re: 72 blazer w/ cummins
Should be a great rig, but I have never heard anything good about that Getrag
__________________
68 Chevrolet k20 Longbed 350 SM465/205, Dana 44, 14bolt, Power steering, Power Disk Brakes, 35" BFGs. 84 Chevrolet Suburban K20 6.2 Banks turbo TH400/NP208 Now with G80 68 GMC C20 Parts? Truck And a few cars |
01-01-2008, 04:57 PM | #4 | |
Senior Member
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
|
Re: 72 blazer w/ cummins
Quote:
we just put a 4bt in a cherokee xj, and it has no balls. their is either a boost leak that we haven't found, or its the engines lack of size. if i was to put a 4bt in anything, it would have to be modded, and it wouldn't go in anything bigger than a TJ. JMO ryan |
|
01-04-2008, 09:03 AM | #5 |
Post Whore
Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,686
|
Re: 72 blazer w/ cummins
Santa should have got you a camera for Christmas because I want pics of this project!
__________________
1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 |
01-04-2008, 09:49 AM | #6 |
Special Order
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: 72 blazer w/ cummins
Cool project.If I get my hands on a cummins 6 it`ll be going in one of my trucks.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
01-04-2008, 04:03 PM | #7 | |
Senior Member
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
|
Re: 72 blazer w/ cummins
Quote:
my plans have switched to 6bt for my K20 now because of this little project. it will make it much more usable for what i want to do with and i will get better mileage. +2 for me Ryan |
|
01-05-2008, 07:35 PM | #8 |
Senior Member
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
|
Re: 72 blazer w/ cummins
test fit the front clip today and there was huge amounts of rad. to fan clearance. this thing fits great considering what was supposed to go in the engine bay. i did have to section the front core support cross member, but that was easy and so far has been the only real issue. hopefully i will have pictures soon
Ryan |
01-05-2008, 07:53 PM | #9 |
Recovering 67-72 Addict
Join Date: Oct 2000
Location: North Bend, WA
Posts: 1,788
|
Re: 72 blazer w/ cummins
I would love to see pictures of this install. I have been pondering getting rid of my 427 gasser and installing a Duramax in my '68. The 04 Duramax that I owned was one of the best trucks that I have owned.
__________________
68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women" |
01-06-2008, 07:29 PM | #10 |
Senior Member
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
|
Re: 72 blazer w/ cummins
we are documenting the install at work, so there are pictures. there are lots of things going on at work, bot h in the shop and the office, so it could be a few days till our office manager emails me the pics
Ryan |
01-09-2008, 09:33 AM | #11 |
Post Whore
Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,686
|
Re: 72 blazer w/ cummins
A while back my camera stopped working with the usb cable that goes from the camera to the computer so I got one of those multi-card readers and find that works great. Something was wrong on the camera so the cable wasn't making a good connection. Maybe a card reader could help with your issue.
__________________
1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 |
01-09-2008, 08:41 PM | #12 | |
Senior Member
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
|
Re: 72 blazer w/ cummins
Quote:
Ryan |
|
01-14-2008, 02:22 PM | #13 |
Senior Member
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
|
Re: 72 blazer w/ cummins
finally got a few pictures. not alot, but it gives you an idea about fitment and whatnot.
some of the welds look a little boogery on the new x-member. i was "training" the new guy, and since this is the bosses rig and not a customers, we let him do some welding. hope you all enjoy. Ryan Last edited by ryanroo; 01-14-2008 at 02:31 PM. |
01-14-2008, 03:17 PM | #14 |
Aluminum slot wheels rule...
Join Date: Jan 2006
Location: Maine
Posts: 6,211
|
Re: 72 blazer w/ cummins
Looks good. The furthest valve cover back has me worried though. Is there enough clearence there to get it off?
|
01-14-2008, 04:04 PM | #15 |
Senior Member
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
|
Re: 72 blazer w/ cummins
all of the valve covers and the exaust manifold can be removed in the truck. that was a concern we made sure to accomodate. the engine is mounted low enough that the valve cover and bolt have plenty of room. this was also done to try to keep the weight as low and as far back as possible. we could have probably moved the engine forward at least .5" maybe .75" without being uncomfortably close to the rad. the x-member and the frame channels are adjutable for height and forward/backward movement.
the t-case plan has changed to an atlas. it appears there will have to be some floor plan mods for the blazer, but nothing extreme. the trucks wouldn't have the same problem. Ryan |
01-14-2008, 04:08 PM | #16 |
Senior Member
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
|
Re: 72 blazer w/ cummins
also, i plan on swapping the 6bt into my 72 as well. when that happens, it will have less lift, but retain the D60 front. this will give us an opportunity to determine how much clearance as far as lift is required. the engine crossmember will be about 3/4" closer to the pan on the next version. i plan on running 4 inches of lift, hopefully the pan/x-member will allow for that and a front 60. if not a reformulation of the x-member will happen.
Ryan Last edited by ryanroo; 01-14-2008 at 04:08 PM. |
01-14-2008, 06:01 PM | #17 |
Senior Member
Join Date: Nov 2005
Location: northwestern wi
Posts: 2,111
|
Re: 72 blazer w/ cummins
i like it minus the lift
__________________
common sense isn't so common anymore |
01-14-2008, 06:39 PM | #18 |
Senior Member
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
|
Re: 72 blazer w/ cummins
it has a mean look to it, but it is utterly useless. no flex, harsh ride, tall CoG... mine is lifted the same amount and i love the look, but for what i want out of it the lift must come back down to around 4 inches.
|
01-15-2008, 06:06 AM | #19 |
Post Whore
Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,686
|
Re: 72 blazer w/ cummins
Thanks for the pics!
__________________
1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 |
01-15-2008, 11:46 AM | #20 |
Registered User
Join Date: Apr 2003
Location: Central PA....In the Berg of Nisbet
Posts: 790
|
Re: 72 blazer w/ cummins
My question is how did you get the core support/radiator to fit with the 6BT? I used a 6AT in mine and the core support/radiator just fit and the engine is almost back to the firewall? I am running a pusher fan. The 6BT is longer than my 6AT...........Did you do any work on the firewall, looks like you did but I can't tell?
You want a piece of excitement, stuff a diesel in a 2 wheel drive...........Wouldn't have been a problem with anything other than a GM with its IFS Maybe some year I'll get the body work done on mine..........We ran the crap out of it two summers ago, this past summer I drove it acouple times, and she's been parked ever since. $3.65 Diesel doesn't make me want to run it.
__________________
'72 K-20 EFI'ed 250 Inline/4spd stake body, Farm Truck '71 C-20 Cummins Diesel Powered, In storage thanks to $5.00 diesel! '69 3500 GMC 305V-6/4spd, Still under reconstruction.......... Inlines Rule! 6 soldiers standing is better than 8 laying down!!!!!!!! |
01-15-2008, 12:18 PM | #21 |
Senior Member
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
|
Re: 72 blazer w/ cummins
everything just fit. the firewall got a little lovin with the ball peen, mostly to accomadate the removal of the exaust manifold. we really didn't have to do much. the core support and radiator are in stock position, and it is a 4 core rad. there is over an inch of clearance between the fan and the core. i did have to do some work to the front crosmember so it would fit without rubbing the harmonic balancer. we were originally going to fab a new one, but i like the look of things being stockish. to the untrained eye, the front x-member looks stock. we did mount the engine lower as that alowed us to move the engine back without bashing the firewall more. it all fits tightly, but it fits.
Ryan |
01-16-2008, 07:27 AM | #22 |
Registered User
Join Date: Dec 2004
Location: Northern AZ
Posts: 7,270
|
Re: 72 blazer w/ cummins
I have a 93 Cummins, that I wanted to put into a Suburban, 4X4 etc, etc. You know, everything that you get in a $40-50K vehicle for pennies on the dollar!! I am very interested in the kit, but I am also kinda ready to sell the Dodge as I have no time or $$. Too many projects never enough time or money!! Any idea on a cost for the kit if I decide to hang onto it?? Biodiesel is the way to go, i am ready to buy the set-up and start making my own diesel for .70 cents a gallon. Screw OPEC, I'll make it myself!!
Last edited by 70rs/ss; 01-16-2008 at 07:28 AM. |
01-16-2008, 03:18 PM | #23 |
Senior Member
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
|
Re: 72 blazer w/ cummins
not sure on the price of the kit right now, we need to finalize it so there is a good set of instructions, pictures, procedure and all that. we also need to get everything to fit so we can have a list of things that are required to make the thing fit. there is a certain cummins manifold that will be needed. there will be some do it yourself fab included i.e. the front x-member. i will talk with the boss as soon as i can and see what he thinks
my boss cooks his own diesel and he really likes it. its cool except for the fish stick smell. ryan |
03-11-2008, 01:31 AM | #24 |
Senior Member
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
|
Re: 72 blazer w/ cummins
some more pics
changed to a purple tranny with atlas core support and intercooler all mounted up. with some work the factory hood latch works fine boost tubes coming out of the core support frame mods to fit the a/c compressor. we ended up putting a different engine with a/c in the truck nothing really changed except the p-side frame rail. tons of sound deadening and dynamat are being used. the bosses wife told him that she wanted something they could have a conversation in. personally thats why i like mine loud |
03-11-2008, 03:21 AM | #25 |
Registered User
Join Date: Feb 2007
Location: Carroll County Maryland ,
Posts: 828
|
Re: 72 blazer w/ cummins
thats looks like its going to be a fun blazer to drive .
__________________
1970 k/5 blazer--> money pit - 14bolt dana 44 350 sm465/205 36 14.50 16 tires 1972 nova plane jane 6 clyinder might sell might keep dont know 2004 chevy s-10 crewcab zr5 sold 1985 c20 chevy long bed , beater , on its way to a better place in pa from what the dmv told me 2010 kia forte koup 2.4 sx -over the river and threw the woods to the total lot it went . 1999 k1500 suburban 350 vortec 4l60e leather land yacht . |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|