WTB BB/th400 shortbed 1pc driveshaft! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71Rat · 01-08-2008, 03:36 PM

as the title says, I just put a BB with a th400 into my truck in the stock location. I'm in need of a drive shaft for it now. its got a 12 bolt in it also.... would prefer someone in nj or pa area to save on shipping, but let me know what you got...

thanks 71rat

teeitup · 01-08-2008, 03:40 PM

I got a one piece driveshaft from a turbo 400, but its a long wheel base.

71Rat · 01-08-2008, 03:45 PM

teeitup: thanks but im looking for a bolt in for right now, one the cheaper side so down the road i can build a nice light weight aluminum one or something along those lines....

Thanks again
71rat

**uncle** · 01-08-2008, 04:12 PM

That's gonna be a hard one to find. You might try on the 73 and up board. They may be close to the same length. May even help if you could get a measurement.

stope4 · 01-08-2008, 05:26 PM

how long do you need? I have one from a camaro.

71Rat · 01-08-2008, 05:35 PM

thats the thing i dont exactly know how long i need i dont have a yoke and also the truck is still in the works of being finished (was trying to get a shaft here so while being assembled i could toss it in)

01-08-2008, 03:36 PM	#1
71Rat ran out of money Join Date: Apr 2003 Location: northern, NJ Posts: 925	WTB BB/th400 shortbed 1pc driveshaft! as the title says, I just put a BB with a th400 into my truck in the stock location. I'm in need of a drive shaft for it now. its got a 12 bolt in it also.... would prefer someone in nj or pa area to save on shipping, but let me know what you got... thanks 71rat __________________ Modify everything, leave nothing alone!~

01-08-2008, 03:40 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: WTB BB/th400 shortbed 1pc driveshaft! I got a one piece driveshaft from a turbo 400, but its a long wheel base. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-08-2008, 03:45 PM	#3
71Rat ran out of money Join Date: Apr 2003 Location: northern, NJ Posts: 925	Re: WTB BB/th400 shortbed 1pc driveshaft! teeitup: thanks but im looking for a bolt in for right now, one the cheaper side so down the road i can build a nice light weight aluminum one or something along those lines.... Thanks again 71rat __________________ Modify everything, leave nothing alone!~

01-08-2008, 04:12 PM	#4
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: WTB BB/th400 shortbed 1pc driveshaft! That's gonna be a hard one to find. You might try on the 73 and up board. They may be close to the same length. May even help if you could get a measurement.

01-08-2008, 05:26 PM	#5
stope4 Registered User Join Date: Jan 2006 Location: Houston Posts: 434	Re: WTB BB/th400 shortbed 1pc driveshaft! how long do you need? I have one from a camaro.

01-08-2008, 05:35 PM	#6
71Rat ran out of money Join Date: Apr 2003 Location: northern, NJ Posts: 925	Re: WTB BB/th400 shortbed 1pc driveshaft! thats the thing i dont exactly know how long i need i dont have a yoke and also the truck is still in the works of being finished (was trying to get a shaft here so while being assembled i could toss it in) __________________ Modify everything, leave nothing alone!~

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.