700R4 speedo cable? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72chevyLWB · 05-04-2002, 07:57 AM

My truck originally had a 4 speed. Then it had a Turbo 400 and now a 700R4. My speedo cable is about 2" too short. Also are the threads different for the cable to tranny and it seems like the speedo gear inside the tranny has a larger hole (square thing). Do I need a different cable for this?

------------------
72 Chevy C/10
87 Chevy Silverado 4X4
www.geocities.com/chevylwb/chevylwb.html
Aberdeen South Dakota
WANTED: Drop Spindles
F/S: rebuilt Turbo 400 & Aluminum wheels w/ tires

bigvinnie · 05-04-2002, 01:30 PM

I used the cable from a truck with a TH350 with no problems, it was correct length and the connections were a perfect match.... my motor mounts are in the forward frame holes... you might come up short if yours are in the rear holes... have a look.

------------------
'72 short step, 350, 700R4, tilt, ps, pdb, a/c, lowered coils, etc., other work in progress... San Diego, CA
http://www.ixpres.com/vlusardi/chevtrk.htm

*Fast68Chevy* · 05-04-2002, 02:18 PM

what length do you need ? i have many cables around, need ot knw if has large or small speedo adaptor on tranny tailhousing

thanks

------------------
Randy- Lincoln, IL
randy@ccaonline.com 2177353230
*many GM parts bought, traded, or sold -am parting out: '81 Cutlass Supreme Brougham

current fleet: -71 C-10 350/CH465/3.07- basketcase
-84 Z28 5.0L/700R4/3.73 daily driver
-84 Firebird/SE 2.8L/T-5/3.73/engine bad
-82 purple Trans Am, project #2
*Paint is overrated*
© RSS Enterprises 2000

05-04-2002, 07:57 AM	#1
72chevyLWB Got 20's???? Join Date: Oct 2001 Location: Aberdeen SD Posts: 1,451	700R4 speedo cable? My truck originally had a 4 speed. Then it had a Turbo 400 and now a 700R4. My speedo cable is about 2" too short. Also are the threads different for the cable to tranny and it seems like the speedo gear inside the tranny has a larger hole (square thing). Do I need a different cable for this? ------------------ 72 Chevy C/10 87 Chevy Silverado 4X4 www.geocities.com/chevylwb/chevylwb.html Aberdeen South Dakota WANTED: Drop Spindles F/S: rebuilt Turbo 400 & Aluminum wheels w/ tires __________________ 99 Silverado Ex-Cab 2wd, Bagged&WhippleCharged 02 Sierra Ex-Cab 4wd 2500 HD The 72 went down the road.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-04-2002, 01:30 PM	#2
bigvinnie Registered User Join Date: Aug 2001 Location: escondido, ca 92026 Posts: 1,222	I used the cable from a truck with a TH350 with no problems, it was correct length and the connections were a perfect match.... my motor mounts are in the forward frame holes... you might come up short if yours are in the rear holes... have a look. ------------------ '72 short step, 350, 700R4, tilt, ps, pdb, a/c, lowered coils, etc., other work in progress... San Diego, CA http://www.ixpres.com/vlusardi/chevtrk.htm __________________ '72 short step, 350, 700R4, tilt, ps, pdb, a/c, lowered coils, etc., other work in progress... San Diego, CA 72 Stepside Project

05-04-2002, 02:18 PM	#3
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	what length do you need ? i have many cables around, need ot knw if has large or small speedo adaptor on tranny tailhousing thanks ------------------ Randy- Lincoln, IL randy@ccaonline.com 2177353230 many GM parts bought, traded, or sold -am parting out: '81 Cutlass Supreme Brougham current fleet: -71 C-10 350/CH465/3.07- basketcase -84 Z28 5.0L/700R4/3.73 daily driver -84 Firebird/SE 2.8L/T-5/3.73/engine bad -82 purple Trans Am, project #2 Paint is overrated* © RSS Enterprises 2000



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.